金属任意腐蚀损伤量的日历寿命计算模型和曲线

国际机械日历寿命研究,都是在假设已知腐蚀损伤容限Dc的前提下,求在这个Dc下的金属日历寿命。为了便于应用,本文不再假设腐蚀损伤容限Dc为已知数,而是把Dc当做变量,求金属任意腐蚀损伤量Di的日历寿命。本文通过多方面深入研究,发现腐蚀试验溶液的浓度dt与试验时间Ht的乘积除以试验获得的腐蚀损伤Dt等于一个常数。由此给出一种简单易行的金属任意腐蚀损伤量日历寿命的计算模型和相应的求解曲线。由此模型或曲线,可求得金属任意腐蚀损伤量的日历寿命。     

基于空间矢量脉宽调制的过调制策略研究

在电机控制中,过调制算法能够显著提高逆变器输出的电压,对提高电机转速有着重要意义。为了改善空间矢量脉宽调制对直流母线电压利用率不足的缺点,研究了基于空间矢量脉宽调制的单模式过调制算法,对输出电压基波幅值与其谐波含量进行理论分析。针对过调制区实际输出电压基波幅值与参考电压不一致这一问题,对目标调制比与给定调制比的关系作出可控性分析,作出拟合曲线并求出函数关系,最后对该过调制算法进行了仿真研究和试验验证。仿真分析和试验验证结果均证明了理论分析的正确性和可行性。     

金属膜盘联轴器轴向振动特性研究

为研究金属膜盘联轴器的轴向振动特性,分别通过有限元计算和试验方法分析了金属膜盘联轴器的轴向拉伸刚度、轴向压缩刚度和轴向固有频率。根据分析结果,对某型膜盘联轴器开展了在运转条件下的轴向振动测试。结果表明:金属膜盘联轴器的轴向拉伸刚度和压缩刚度均呈现明显的非线性特性。在某型联轴器的工作转速范围内存在轴向振动固有频率,但仅在使用转速激励,且在联轴器的轴向固有频率下运转,联轴器才不会发生轴向共振。     

MDS图在液态模锻工艺过程单片机仿真控制系统中的应用

本文介绍了液态模锻工艺过程单片机仿真控制系统的设计方法，包括液态模锻工艺程确立、逻辑量确立、硬件系统设计、ＭＤＳ图的建立及软件实现，在工艺设备的逻辑性控制中应用ＭＤＳ图控制结构设计的控制器可方便方便地实现ＰＬＣ的控制功能，也可主便地实现其他娄字逻辑系统的控制功能。     

致密金属零件的激光近形制造

介绍了激光近形制造系统的组成,分析了该技术的特点和应用场合,指出了目前存在的问题和解决办法.     

Mathematical description of the NaK model for MASTER-2005

The release of NaK droplets has been modeled for the new version of the European Meteoroid and Space Debris Terrestrial Environment Reference model MASTER-2005. Previously published versions of the model have been revised. The parameters of the model are introduced and discussed. NaK droplets consist of eutectic sodium–potassium alloy and have been released during RORSAT reactor core ejections. They contributed to the space debris environment in the centimeter and millimeter size regime. Sixteen nuclear powered RORSATs launched between 1980 and 1988 activated a reactor core ejection system in Sufficiently High Orbits (SHO), mostly between 900 and 950 km altitude. The core ejection caused an opening of the primary coolant circuit. The liquid coolant has been released into space during these core ejections. The outflow is considered as a discrete event for each of the sixteen core ejections in total. The NaK coolant has been forming droplets up to a diameter of 5.5 cm. NaK releases are restricted to a very narrow region near 65° inclination. This paper gives the parameters of the NaK release model as it is implemented in MASTER-2005. The quantitative values of all model parameters including characteristic diameter and uniformity parameter are presented. The ratio of the characteristic droplet size to the orifice diameter is discussed. It is estimated that altogether 128 kg of NaK-78 (8 kg per RORSAT) was released on orbit. Simulation runs show that there are still 45,000 droplets with a total mass of 97 kg in orbit at the reference epoch 1 May 2005, whereas the smallest droplet has a diameter of 5 mm. Results of orbit propagation simulation runs are presented in terms of spatial density.     

嵌金属丝推进剂燃烧起始阶段增速特性研究

考虑了使用嵌金属丝装药的发动机工作过程中的多种因素,建立了金属丝与药柱、燃气间相互作用的控制方程组,并对方程组进行了数值求解,得到了嵌金属丝推进剂在燃烧起始阶段,增速比随时间的详细变化过程。结果表明,金属丝的热扩散率、熔点、直径和黑度以各自不同的方式影响金属丝的增速效果,熔点相对较低的金属丝可能会在内弹道曲线的初始阶段形成一个轻微的压强峰,固有燃速较低、着火温度较低的推进剂对嵌入金属丝较为敏感。文中数值方法计算量小,结果可靠,适于工程应用。     

高压金属软管应力及参数敏感度分析

某型号发动机热试车考核中高压金属软管多次出现破坏。通过建立软管有限元模型,采用非线性有限元分析了软管应力分布和各部分承载特点,判断波峰处轴向应力是影响软管结构强度的主要因素,有限元计算结果和试验破坏部位一致,表明有限元模型的合理性。在此基础上,通过参数化建模、设计中心复合实验和进行参数敏感度分析,得出影响波峰处最大轴向应力的敏感参数,为结构参数优化提供了依据。     

A nonlinear background removal method for seismo-ionospheric anomaly analysis under a complex solar activity scenario: A case study of the M9.0 Tohoku earthquake

A precise determination of ionospheric total electron content (TEC) anomaly variations that are likely associated with large earthquakes as observed by global positioning system (GPS) requires the elimination of the ionospheric effect from irregular solar electromagnetic radiation. In particular, revealing the seismo-ionospheric anomalies when earthquakes occurred during periods of high solar activity is of utmost importance. To overcome this constraint, a multiresolution time series processing technique based on wavelet transform applicable to global ionosphere map (GIM) TEC data was used to remove the nonlinear effect from solar radiation for the earthquake that struck Tohoku, Japan, on 11 March, 2011. As a result, it was found that the extracted TEC have a good correlation with the measured solar extreme ultraviolet flux in 26–34 nm (EUV_26–34) and the 10.7 cm solar radio flux (F_10.7). After removing the influence of solar radiation origin in GIM TEC, the analysis results show that the TEC around the forthcoming epicenter and its conjugate were significantly enhanced in the afternoon period of 8 March 2011, 3 days before the earthquake. The spatial distributions of the TEC anomalous and extreme enhancements indicate that the earthquake preparation process had brought with a TEC anomaly area of size approximately 1650 and 5700 km in the latitudinal and longitudinal directions, respectively.     

钛合金熔模精铸氧化锆陶瓷型壳／金属界面反应研究

通过实际浇注和真空扩散连接分别制取了钛／型壳界面，借助ＳＥＭ、ＥＰＭＡ和显微硬度仪等分析测试手段对所得界面进行了深入研究，初步提出了以Ｚｒ、Ｏ元素向钛基体内的扩散为主导的界面反应机制。实验结果表明，界面反应并非在整个界面上均衡推进，而是在浓度、温度、能量起伏、以及陶瓷颗粒位向适宜的区域优先发生界面反应