航空发动机故障诊断装置硬件在环实时仿真平台

硬件在环仿真是将算法由理论转为实际应用的重要步骤,而针对航空发动机故障诊断算法的硬件在回路仿真平台的研制目前还处于初级阶段。基于已有的民用大涵道比涡扇发动机非线性模型,利用基于x PC的自动代码生成技术,搭建了基于工控机与DSP的故障诊断装置硬件在回路实时仿真系统,并对平台的性能参数、使用流程进行了说明。提出了1种故障诊断算法并进行了硬件在回路验证。针对搭建的平台,提出1种故障诊断算法的评价标准。     

基于IEC 61400121: 2017的风轮等效风速研究

2017版风电机组功率特性测试标准与2005版功率测试标准的一大改变在于风速的定义,前者规定应基于风轮等效风速评估风机的功率特性。分析了新版标准中的风轮等效风速的定义,提出了计算叶尖低处区域面积和叶尖高处区域面积的简化算法,验证了两种风轮等效风速计算方法的有效性和可行性。     

Haynes 282新型高温合金晶粒长大行为及数学模型研究

为了研究新型合金在高温状态下的晶粒长大行为,进行了Haynes 282合金在973～1 373 K条件下保温0～10 800 s的晶粒长大实验,通过实验分析了保温时间和保温温度对其晶粒尺寸的影响,研究了晶粒尺寸在其实验条件下的演变规律。由此构建了符合Haynes 282合金晶粒长大的数学模型,该模型的建立能够有效表征Haynes 282合金在高温下的晶粒长大行为。     

用于立方体卫星的高增益天线技术与发展趋势

随着MarCO与RainCube的成功在轨验证,立方体卫星已经在深空探测与遥感领域展现出独特的优势。立方体卫星搭载的天线不仅需要提供良好的辐射特性,还必须满足立方体卫星苛刻的体积和重量限制,这种限制条件在设计大口径高增益天线时尤为重要。首先简要介绍了立方体卫星的起源、发展及其应用前景,其次重点介绍了立方体卫星高增益天线的技术特点、研究现状及其在轨验证情况,最后归纳总结了立方体卫星高增益天线技术的未来发展趋势,为我国后续开展立方体卫星研究与应用提供参考。     

流量预测下智能寻优门限值的AOS帧生成算法

针对AOS空间通信系统的自适应帧生成算法帧生成时间门限值需要人工设置问题,提出一种流量预测下智能寻优门限值的AOS帧生成算法.该算法使用小波神经网络对ON/OFF模型产生的自相似流量进行预测,根据预测流量计算复用效率和平均包时延,使用人工鱼群算法对建立的综合评价函数进行智能寻优,从而得到帧生成算法的最佳门限值.该算法可...     

基于分散式RHC算法的无人机编队碰撞避免研究

提出了一种基于滚动时域控制(Receding Horizon control)的,保证无人机编队在飞行过程中满足约束条件并且防撞的分散式控制设计方案.此方法中,每架UAV都可以做出紧急自由碰撞规避机动,以保证冲突避免和约束履行.使用不变集合方法和强制协同的逻辑规则保证了在飞行中UAV之间的碰撞避免.仿真证明,此种分散式RHC方法是有效的.     

大幅运动复杂构形扑翼动态网格生成的一种新方法

 基于Delaunay图映射的动态网格生成方法无需迭代计算,效率高,稳定性好。但对大幅运动复杂构形的动边界问题,背景图容易交叉,重新生成背景图和重新定位网格点信息不仅费时而且会导致网格质量的严重下降。提出一种双重Delaunay图映射的动网格生成方法,通过在初始背景图中添加辅助点,生成虚实两种背景图和虚实两种映射关系。分别根据虚映射关系和虚背景图、实映射关系和实背景图,移动辅助点和网格点。几个复杂构形的扑翼算例表明,双重图映射方法多付出极少的内存代价即可避免背景图交叉引起的问题,提高了动网格生成的效率和质量,增强了处理大变形复杂动边界问题的强健性。     

TSTO运载器一级返场轨迹优化设计与在线生成

对水平起降两级入轨（TSTO）运载器一子级返场轨迹优化和轨迹在线生成问题进行了研究。首先，给出了较独特的一子级再入轨迹设计策略：先给定侧向剖面，再分段优化求解三维轨迹。针对返场过程的大幅转向需求，设计了形式简单的倾侧角-航向角偏差剖面，并定义了具有不同任务的航向转弯段和航向微调段；针对一子级宽速域气动变化显著特点，为避免轨迹跳跃，定义了增高减速段和下降滑翔段，并采用分段优化策略求解三维轨迹。其次，针对分离扰动造成的一子级初始状态偏差，扩展了自适应高维伪谱插值（AMPI）算法的参数空间，并将其应用于返场轨迹在线生成问题。仿真结果表明，设计的倾侧角剖面能够在倾侧角不翻转的前提下调整飞行航向对准着陆场，设计的分段优化策略能够保证高度曲线平稳无跳跃，采用的自适应高维伪谱插值算法能够在分离扰动影响下快速准确地实现在线轨迹生成。     

Reduction rules-based search algorithm for opportunistic replacement strategy of multiple life-limited parts

The opportunistic replacement of multiple Life-Limited Parts(LLPs) is a problem widely existing in industry.The replacement strategy of LLPs has a great impact on the total maintenance cost to a lot of equipment.This article focuses on finding a quick and effective algorithm for this problem.To improve the algorithm efficiency, six reduction rules are suggested from the perspectives of solution feasibility, determination of the replacement of LLPs, determination of the maintenance occasion and solution optimality.Based on these six reduction rules, a search algorithm is proposed.This search algorithm can identify one or several optimal solutions.A numerical experiment shows that these six reduction rules are effective, and the time consumed by the algorithm is less than 38 s if the total life of equipment is shorter than 55000 and the number of LLPs is less than11.A specific case shows that the algorithm can obtain optimal solutions which are much better than the result of the traditional method in 10 s, and it can provide support for determining tobe-replaced LLPs when determining the maintenance workscope of an aircraft engine.Therefore,the algorithm is applicable to engineering applications concerning opportunistic replacement of multiple LLPs in aircraft engines.     

Experimental and numerical study on pressure oscillation in a combustor with rotary valve

A rotary valve coupled in a combustor assembly can generate periodic pressure oscillations inside the combustor and can be used to study the combustion instability in the combustion chamber of a rocket engine. This paper proposes a cold gas flow experimental system based on a rotary valve and a corresponding rotation model. A 3D numerical model is proposed to obtain the transient flow inside the rotary valve, and the dynamic mesh technique and User-Defined Functions (UDFs) are adopted to implement a swing motion instead of a rotary motion. Several cold gas flow experiments are carried out at rotating speeds of 75 225, and 375 rpm to verify the validity of the numerical model. The effects of rotating speed, stroke length ratio and radius of the RED (Rotor Exhaust Duct) on the pressure oscillations are studied using this numerical model. The results show that the maximum and peak-to-peak values of the pressure oscillations gradually decrease with increasing rotating speed. The ratio of the corresponding peak-to-peak value to the maximum pressure (pressure amplitude ratio) is reduced from 1.81 to 0.6%. The stroke length ratio affects the pressure waveform because it leads to a change in the time spent in the non-exhaust stage. When the stroke length ratio is 0, the waveform closely resembles a sine wave. With the increase in the stroke length ratio, the pressure waveform exhibits a more square or a triangular wave shape. Finally, a high-frequency and high-amplitude pressure oscillation can be obtained by appropriately increasing the radius of the RED.