Statistical study of the time delay of ionospheric TEC storms to geomagnetic storms in Taoyuan,Taiwan

We have studied the time delay of ionospheric storms to geomagnetic storms at a low latitude station Taoyuan (25.02°N, 121.21°E), Taiwan using the Dst and TEC data during 126 geomagnetic storms from the year 2002 to 2014. In addition to the known local time dependence of the time delay, the statistics show that the time delay has significant seasonal characteristics, which can be explained within the framework of the seasonal characteristics of the ionospheric TEC. The data also show that there is no correlation between the time delay and the intensity of magnetic storms. As for the solar activity dependence of the time delay, the results show that there is no relationship between the time delay of positive storms and the solar activity, whereas the time delay of negative storms has weakly negative dependence on the solar activity, with correlation coefficient −0.41. Especially, there are two kinds of extreme events: pre-storm response events and long-time delay events. All of the pre-storm response events occurred during 15–20 LT, manifesting the Equator Ionospheric Anomaly (EIA) feature at Taoyuan. Moreover, the common features of the pre-storm response events suggest the storm sudden commencement (SSC) and weak geomagnetic disturbance before the main phase onset (MPO) of magnetic storms are two main possible causes of the pre-storm response events. By analyzing the geomagnetic indices during the events with long-time delay, we infer that this kind of events may not be caused by magnetic storms, and they might belong to ionospheric Q-disturbances.     

航天器近距离交会的固定时间终端滑模控制

针对航天器近距离交会段的位置姿态耦合控制问题，假设航天器受外界干扰且目标航天器存在空间自由翻滚情形时，基于固定时间概念设计了一种六自由度位姿终端滑模自适应控制器，通过引入显含正弦函数的切换项来避免奇异问题。此外所设计的控制器含双幂次项，不仅能全局提高姿态和位置的跟踪速度及精度，还能估计系统稳定所需的时间上界，且该上界与状态初始值无关。基于Lyapunov方法分析了闭环系统的固定时间稳定性。仿真结果表明，该控制器能快速实现对航天器近距离交会时相对位置和姿态的控制，具有较高的精度和良好的干扰抑制能力。     

基于开路电压法的电池荷电状态估计误差校正

本文提出分别研究电池开路电压在充电结束后停置过程和放电结束后停置过程的不同变化规律,并考虑了不同停置时间在两个过程中的作用和影响,从而达到提高开路电压法估算荷电状态精度的效果。实验验证表明,此方法的精度比传统开路电压法更加准确。     

海洋大气环境下微动开关触点回跳时间增大故障的试验复现与分析

结合某型微动开关触点回跳时间增大导致某系统故障问题,设计了由干湿交替酸性盐雾试验和湿热试验组成的海洋大气环境效应加速模拟试验剖面,选取与外场故障件型号一致的微动开关为研究对象,通过实验室加速模拟试验,成功复现了外场故障现象,并结合试验结果对腐蚀性环境、电烧蚀等因素对触点回跳时间增大的影响机制进行了分析。     

Spatial transformation of general sampling-aliasing frequency region for rotating-blade parameter identification with emphasis on single-probe blade tip-timing measurement

Blade-health monitoring is intensely required for turbomachinery because of the high failure risk of rotating blades. Blade-Tip Timing (BTT) is considered as the most promising technique for operational blade-vibration monitoring, which obtains the parameters that characterize the blade condition from recorded signals. However, its application is hindered by severe undersampling and stringent probe layouts. An inappropriate probe layout can make most of the existing methods invalid or inaccurate. Additionally, a general conflict arises between the allowed and required layouts because of arrangement restrictions. For the sake of economy and safety, parameter identification based on fewer probes has been preferred by users. In this work, a spatial-transformation-based method for parameter identification is proposed based on a single-probe BTT measurement. To present the general Sampling-Aliasing Frequency (SAFE) map definition, the traditional time–frequency analysis methods are extended to a time-sampling frequency. Then, a SAFE map is projected onto a parameter space using spatial transformation to extract the slope and intercept parameters, which can be physically interpreted as an engine order and a natural frequency using coordinate transformation. Finally, the effectiveness and robustness of the proposed method are verified by simulations and experiments under uniformly and nonuniformly variable speed conditions.     

一个DIS实时通讯网络的设计与实现

以一个ＤＩＳ（分布交互仿真）实时网络的设计和开发过程为背景,研究了ＤＩＳ实时网络开发中的几个问题。在进行实时ＤＩＳ网络规划时,采用了多点传送的通讯服务方式,保证每个仿真应用只发送变化的信息,只处理与自身相关的信息。指出了进行数据的实时传输格式定义时应注意的几个问题,这些数据定义必须支持多种不同的操作系统和平台。最后给出了开发ＤＩＳ实时通讯软件的方法,包括通讯协议和应用编程接口的选择。     

贝叶斯景象匹配技术

景象匹配技术以其极高的末制导精度在导航系统中起着关键性的作用。经典的景象匹配定位方法只能提供象素级的定位精度,为了获得更高的精度可采用ＦＦＴ匹配算法、最小二乘匹配算法等。该文首次提出了一种新的贝叶斯景象匹配算法。其基本思想在于：匹配定位位置可看作为随机量,先利用匹配图像间的信息求其条件概率分布,再利用图像中的大量样本来求解其贝叶斯估计值。同时研究了基于贝叶斯估计的景象匹配技术的原理及算法,并将其与     

平均应变效应的循环粘塑性描述

提出了一个考虑具有平均应变循环变形行为的粘塑性本构模型,在该模型中,引入了可以计及平均应变效应的应变幅值记忆参数,构造了相应的背应力演化方程,定义了恰当的非比例度;还提出了对先前加载历史循环变形行为衰减记忆的各向同性变形阻力演化方程。模型用于１Ｃｒ１８Ｎｉ９Ｔｉ不锈钢的平均应变效应的本构描述,结果表明模型合理。     

两星一地时差定位方法性能分析

针对同轨多星定位系统以及高低轨联合定位系统需要卫星数量多的特点,设想地面站和卫星联合定位体制。考虑到时差定位体制对卫星运动不敏感的特征,提出一星三地和两星一地2种定位体制,从定位场景、定位原理、理论定位误差和误差分布4个方面对定位效能分析。重点论述了两星一地时差定位误差的地理分布、时间分布以及受高度的影响,对将来的工程化应用提供支撑。     

运动干涉检测的模糊逻辑控制

在采用最大相对速度－距离法的基础上,引入模糊逻辑控制时间裕度,使任意两次检测间的时间间隔适当增大。该方法不仅减少了检测次数,更主要的是利用模糊逻辑的鲁棒性,减少了误差对检测结果的影响,从而使它无论在效率还是在可靠性方面都有了提高。以运动平面多边形为例,通过不采用、采用、部分采用模糊逻辑控制３种方法加以比较,表明了该方法的可靠性和有效性。