重复使用运载器制导与控制技术综述

本文对重复使用运载器制导与控制技术进行综述。随着航天技术的发展,对航天运载器重复使用的需求也日益剧增,具备可复用的天地往返运输能力也一直是航天工业追求的重要目标之一,而制导与控制将发挥重要的作用。首先回顾了全球范围内重复使用运载器的研究进展,随后从不同的维度对其发展途径进行分类和分析,并从垂直起飞垂直着陆（VTVL）、垂直起飞水平着陆（VTHL）、水平起飞水平着陆（HTHL）等3个方面对制导与控制的需求进行了梳理。针对不同的起降模式,详细构建了完整的制导与控制模型、约束与目标函数,从而对比在不同场景下制导与控制的特点和挑战。在此基础上,对在VTVL、VTHL、HTHL 3种工作方式下制导与控制理论研究与工程实践中所取得的研究成果进行分析,并对各种方法的特点进行了论述和比对。最后对本领域当前亟待突破的技术难点和发展趋势进行了讨论,并对推动重复使用运载器应用的重点研究方向进行了归纳和展望。     

通用机场机坪运行安全风险评估方法研究

传统机场机坪运行评价方法在确定指标权重方面存在不足,而模糊评价法在确定隶属度时主观判断较多。结合通用机场机坪运行特点建立评价指标体系,采用变权和相对差异函数的方法对通用机场机坪运行安全风险进行评估。首先运用变权理论对各评价指标的常权进行调整,体现单个指标对评价结果的影响;然后利用相对差异函数确定单因素对各安全等级的隶属...     

超高强度300M钢起落架主支柱激光增材修理应用研究

某型民用飞机起落架开展疲劳试验,进行到105857起落时其主支柱组件主传力部位出现长度34mm裂纹,该支柱材料为300M钢(模锻件).手工打磨裂纹部位,清除裂纹后在零件上形成长约40mm、宽约8mm、深度30～44mm的长条形直通孔,应用A100材料,利用机器人手臂激光熔化沉积增材制造技术开展激光增材修复工艺研究,完成...     

基于叶端定时的转子叶片动应变重构不确定性量化

基于叶片非接触式动应变重构理论,开展动应变重构不确定性量化方法研究。基于方差合成定理建立重构叶片动应变不确定性量化分析模型;以模拟转子叶片为研究对象,开展旋转叶片叶端定时试验,利用周向傅里叶算法获取不同叶端定时传感器布局下的测点振幅,通过最大熵方法拟合振幅分布概率密度函数,确定叶端定时测振的不确定性参数;结合Kriging代理模型和试验共振频率数据对叶片有限元模型进行修正,获取关键测点位移-应变转换因子,并获取考虑共振转速以及测点位置不确定性的转换因子不确定性参数;获取重构动应变的均值、标准不确定度和包含区间,与应变片测量数据作对比。结果表明,除5号叶片A测点外,测量动应变均位于重构动应变的95%置信度下的包含区间内,且所有叶片的应变片测点动应变重构误差不超过15%。     

月球引力转弯软着陆的制导控制研究

对于月球引力转弯软着陆过程 ,采用反馈线性化方法 ,对高度和速度信息分别设计了跟踪制导控制律 ,并应用微分几何的有关理论证明了这两种跟踪制导控制系统的李雅普诺夫稳定性。此外 ,根据软着陆系统推力、燃料和状态的约束条件 ,给出了引力转弯着陆过程初始条件的可达集合。最后给出的软着陆跟踪制导实例 ,只需要测得斜向距离、速度和姿态角度信息。这种制导方法测量简单 ,适于低成本的软着陆任务。     

Interplanetary shocks and sudden impulses during solar maximum (2000) and solar minimum (1995–1996)

In this work a study is performed on the correlation between fast forward interplanetary shock parameters at 1 Astronomical Unit and sudden impulse (SI) amplitudes in the H-component of the geomagnetic field, for periods of solar activity maximum (year 2000) and minimum (year 1995–1996). Solar wind temperature, density and speed, and total magnetic field, were taken to calculate the static pressures (thermal and magnetic) both in the upstream and downstream sides of the shocks. The variations of the solar wind parameters and pressures were then correlated with SI amplitudes. The solar wind speed variations presented good correlations with sudden impulses, with correlation coefficients larger than 0.70 both in solar maximum and solar minimum, whereas the solar wind density presented very low correlation. The parameter better correlated with SI was the square root dynamic pressure variation, showing a larger correlation during solar maximum (r = 0.82) than during solar minimum (r = 0.77). The correlations of SI with square root thermal and magnetic pressure were smaller than with the dynamic pressure, but they also present a good correlation, with r > 0.70 during both solar maximum and minimum. Multiple linear correlation analysis of SI in terms of the three pressure terms have shown that 78% and 85% of the variance in SI during solar maximum and minimum, respectively, are explained by the three pressure variations. Average sudden impulse amplitude was 25 nT during solar maximum and 21 nT during solar minimum, while average square root dynamic pressure variation is 1.20 and 0.86 nPa^1/2 during solar maximum and minimum, respectively. Thus on average, fast forward interplanetary shocks are 33% stronger during solar maximum than during solar minimum, and the magnetospheric SI response has amplitude 20% higher during solar maximum than during solar minimum. A comparison with theoretical predictions (Tsyganenko’s model corrected by Earth’s induced currents) of the coefficient of sudden impulse change with solar wind dynamic pressure variation showed excellent agreement, with values around 17 nT/nPa^1/2.     

大型客机飞行员操作程序综合评价

机组对飞机的成功操作很大程度上依赖于一套精心编制的飞行员操作程序,不合理或不合逻辑的操作程序可能导致飞行员的违规操作,进而引发飞行事故.参考波音737NG飞行机组操作手册,分析进近和着陆阶段的任务功能流程后确定了评价指标体系的层次结构;采用德尔菲法对现役飞行员进行两轮咨询,建立了基于安全性的进近和着陆阶段飞行员操作程序综合评价指标体系;对飞行员进行咨询,采用序关系分析法确定了各指标的权重系数;应用模糊综合评价法对飞行员操作程序进行综合评价,得到了飞行员操作程序的评价等级和评价值.提出了一种将功能流程图法、德尔菲法、序关系分析法和模糊综合评价法相结合的飞行员操作程序综合评价方法,并应用于波音737NG飞机进近和着陆阶段的操作程序评价.评价结果说明了该综合评价方法的合理性.     

月球着陆器着陆腿非线性有限元建模与仿真

为了准确地预测着陆冲击过程中着陆腿的载荷缓冲和吸能性能用于指导着陆缓冲机构的设计和优化,采用非线性有限元方法进行着陆冲击动力学仿真.建立了单腿着陆冲击有限元模型,采用ABAQUS/Explicit显式动力学程序作为求解器.为提高计算效率,采用了质量缩放技术.对2个单腿着陆冲击工况进行了动力学仿真分析,通过与试验数据的对比证明了分析结果的正确性.分析结果表明:非线性有限元模型可以综合考虑各种非线性因素的影响,能较准确地预测着陆腿着陆缓冲性能;着陆腿的弹性对套筒间的摩擦力有较大的影响,增大着陆腿刚度可以减小摩擦力.     

小型无人机伞降回收运动分析CSCD

针对小型无人机伞降回收的特点,研究了在无人机回收过程中,飞机及降落伞系统的运动轨迹及姿态。通过分析机伞间的力学关系,建立了机伞系统运动模型,并进行了仿真分析,给出了无风情况下回收运动的仿真结果。结果表明,系统能够满足无人机回收要求,可以决定最佳的回收参数,从而得到最优回收轨迹和姿态。     

Powered-descent trajectory optimization scheme for Mars landing

This paper presents a trajectory optimization scheme for powered-descent phase of Mars landing with considerations of disturbance. Firstly, θ–D$\theta ''–''D$ method is applied to design a suboptimal control law with descent model in the absence of disturbance. Secondly, disturbance is estimated by disturbance observer, and the disturbance estimation is as feedforward compensation. Then, semi-global stability analysis of the composite controller consisting of the nonlinear suboptimal controller and the disturbance feedforward compensation is proposed. Finally, to verify the effectiveness of proposed control scheme, an application including relevant simulations on a Mars landing mission is demonstrated.