一种利用ILSP的同步DS-CDMA信号快速盲解扩算法

针对同步DS-CDMA信号的盲解扩问题，本文提出了一种基于迭代最小二乘投影算法(ILSP)的快速盲解扩算法。本算法首先通过对截获信号的协方差矩阵进行特征分解，估计出由各用户扩频序列张成的信号子空间，然后结合扩频码序列的有限符号集特性，利用ILSP算法消除由特征分解产生的酉矩阵模糊问题，得到扩频序列的精确估计，最后利用估计得到的扩频序列对截获信号解扩得到信息码序列，完成DS-CDMA信号的盲解扩。仿真结果表明本算法在低信噪比条件下具有良好的盲解扩性能，且相较传统算法本文提出算法大大降低了计算复杂度 。     

判断矩阵的最少元素构造法

在层次分析法中构造判断矩阵并使判断矩阵具有一致性是非常关键的。为减少正互反矩阵两两比较的复杂性,降低计算难度,从判断矩阵的构造入手,首先确定相对独立的主对角线上(下)侧元素,而非独立元素就按照一致性原理计算。利用最少的元素构造判断矩阵,使构造矩阵过程简洁,效率提高,满足一致性的要求。     

Influence of TiB2 particles on machinability and machining parameter optimization of TiB2/Al MMCs

In situ formed TiB₂ particle reinforced aluminum matrix composites (TiB₂/Al MMCs) have some extraordinary properties which make them be a promising material for high performance aero-engine blade. Due to the influence of TiB₂ particles, the machinability is still a problem which restricts the application of TiB₂/Al MMCs. In order to meet the industrial requirements, the influence of TiB₂ particles on the machinability of TiB₂/Al MMCs was investigated experimentally. Moreover, the optimal machining conditions for this kind of MMCs were investigated in this study. The major conclusions are: (1) the machining force of TiB₂/Al MMCs is bigger than that of non-reinforced alloy and mainly controlled by feed rate; (2) the residual stress of TiB₂/Al MMCs is compressive while that of non-reinforced alloy is nearly neutral; (3) the surface roughness of TiB₂/Al MMCs is smaller than that of non-reinforced alloy under the same cutting speed, but reverse result was observed when the feed rate increased; (4) a multi-objective optimization model for surface roughness and material removal rate (MRR) was established, and a set of optimal parameter combinations of the machining was obtained. The results show a great difference from SiC particle reinforced MMCs and provide a useful guide for a better control of machining process of this material.     

基于T-S模糊模型的模糊大系统的混合滤波

针对非线性大系统内部过程参数的检测估计,采用连续模糊大系统模型,利用lyapunov定理和分布式处理方法,给出了模糊大系统的H2/H∞混合滤波器设计方法。该方法在保证滤波误差系统全局稳定的同时,具备了H2/H∞性能。通过求解线性矩阵不等式,可以得到滤波器参数。最后,用一个数值例子验证了该方法的正确性和有效性。     

纤维增韧陶瓷基复合材料的比例极限应力与残余热应力关系

从细观力学角度分析并建立了纤维增韧陶瓷基复合材料从制备温度冷却到室温过程中产生的残余热应力与复合材料的比例极限应力的关系模型。该模型表明,减少复合材料的残余热应力或提高复合材料的纤维与基体的模量比,均可提高复合材料的比例极限应力。通过单调拉伸实验测试了先驱体浸渍裂解法(PIP)制备的2D SiC/SiC复合材料的比例极限应力,并采用文中建立的比例极限应力与残余热应力关系模型,计算出复合材料SiC基体的残余热应力为-19.5 MPa。分析表明,该结果是合理的。此外,引用了公开文献报道的5种复合材料体系数据,用于验证文中所建立的比例极限应力与残余热应力关系模型的适应性和可靠性,计算结果与实验结果最大误差为18.6%,表明该模型具有较好的适应性和可靠性,可为纤维增韧陶瓷基复合材料的研究提供新思路。     

FAST FEATURE RANKING AND ITS APPLICATION TO FACE RECOGNITION

A fast feature ranking algorithm for classification in the presence of high dimensionahty and small sample size is proposed. The basic idea is that the important features force the data points of the same class to maintain their intrinsic neighbor relations, whereas neighboring points of different classes are no longer to stick to one an- other. Applying this assumption, an optimization problem weighting each feature is derived. The algorithm does not involve the dense matrix eigen-decomposition which can be computationally expensive in time. Extensive exper- iments are conducted to validate the significance of selected features using the Yale, Extended YaleB and PIE data- sets. The thorough evaluation shows that, using one-nearest neighbor classifier, the recognition rates using 100-- 500 leading features selected by the algorithm distinctively outperform those with features selected by the baseline feature selection algorithms, while using support vector machine features selected by the algorithm show less prominent improvement. Moreover, the experiments demonstrate that the proposed algorithm is particularly effi- cient for multi-class face recognition problem.     

Bush有限单元原理及其在航天器结构建模中的应用

利用大量的数值计算确定了MSC.NASTRAN软件中广义弹簧单元（Bush）刚度阵的解析表达式,通过对比Bush元与剪切梁元的刚度阵,推导了Bush元参数与剪切梁刚度参数的对应关系,并利用展开状态的太阳翼结构和大型桁架结构的静力和动力分析验证了推导结果。该研究揭示了Bush有限单元的原理和所有输入参数的物理含义,有助于Bush元在结构有限元分析中的准确使用。     

Young不等式、Holder不等式与Minkowski不等式的新证法

本文给出著名的Young不等式,H(?)lder不等式与Minkowski不等式的新证法。在通常的书上都利用Young不等式来证H(?)lder不等式,再用H(?)lder不等式来证Minkowski不等式。而在本文中用凸函数的特性证明上述三个不等式。     

一种新型并联微动机器人运动学分析

提出了一种新型的少自由度微动并联机器人,利用螺旋理论对于微动并联机器人的自由度进行分析,得到机构正常运动时所需要的驱动个数。利用矢量方法得到微动并联机器人的运动学反解。基于雅可比矩阵的可逆性,研究了微动机器人的奇异问题,从而确定该微动并联机器人的输入和输出之间的关系。     

基于模糊聚类分析的步枪作战效能评估

为了评估步枪的战术效能,科学地构建步枪作战效能评估体系,运用模糊聚类分析方法对步枪作战效能进行评估,最后通过算例验证了所建模型是合理、可行的。