非线性PD型比例导引鲁棒性研究

为研究存在视线角速度测量噪声时非线性比例微分(PD)型比例制导方案的鲁棒性,以近距大离轴角发射和目标大机动为拦截条件,对四种视线角速度测量噪声方差进行蒙特卡罗仿真模拟。结果表明,非线性PD型比例制导方案抗视线角速度测量噪声的鲁棒性强,对机动目标拦截制导精度高,是一种具工程应用价值的高精度末制导方案。     

基于统计参数分析和RBF网络的动调陀螺故障诊断方法

针对动调陀螺故障振动信号的特点,提出了一种基于振动统计参数分析和神经网络的动调陀螺故障诊断方法.该方法通过计算原始振动信号的一组统计参数作为表征故障的特征信息,以此作为RBF神经网络的输入参数来学习并识别陀螺故障.实验结果表明,采用对统计参数的计算能够简单、有效地提取陀螺故障特征信息;运用神经网络进行故障诊断建模,使诊断具有自适应、自学习的能力,诊断结果更加可靠.     

导弹子母弹子弹抛撒弹道模型及数字仿真

建立了导弹子母弹抛撒弹道模型，并编制了抛撒弹道仿真程序，仿真结果与靶场试验结果一致，仿真程序也适用于所有弹道导弹子母弹撒 轴对称子弹的无控弹道仿真，可为地地导弹子母作战使用及作战效能研究提供强有力的分析工具。     

翼柱型装药发动机点火升压过程计算

利用实验获得的翼槽内火焰传播规律经验公式,在Ｐ（ｔ）模型的基础上,建立了翼柱型发动机的点火升压计算模型。计算结果与实测数据吻合较好。同时就点火器流量、推进剂燃速、喷管堵盖打开压强等设计参数对发动机点火升压过程的影响进行了分析。     

Tether Satellite System Collision Study

A study was performed to determine the probability of collision with resident space objects and untrackable debris for the tether component of the Tethered Satellite System (TSS) after it broke away from the Space Shuttle orbiter (mission STS-75) in February 1996. Both an analytical and a numerical approach were used in this study, and the results obtained with these two methods were found to be in good agreement. These results show that the deployed tether is expected to have been impacted by several particles 0.1mm or larger in size. The probability of collision with objects 10cm in size or larger was on the order of 10^–3 per month. Since the severed tether reentered within one month after deployment, the collision hazard to other objects while in orbit was small. The analytical methods used in this study are useful for tether collision evaluations in general.     

再入机动飞行器数学仿真研究

本文讨论了再入机动飞行器三自由度和六自由度仿真和分析。三自由度仿真研究了再入机动飞行器的导引规律和减速控制规律，证明了其合理性，且精度是满足要求的。而六自由度仿真说明了飞行器再入过程中虽然有静稳定和静不稳定交替出现的飞行状态，且动压变化大，如控制系统和制导方法设计良好，其精度仍可满足要求     

模型修正中一种特殊广义逆的性质与功能

本文对一种特殊的广义逆矩阵在模型修正中使用时可能具有的性质与功能给予了间接的论证,从而为这种广义逆的进一步应用给予了提示。该论证表明,这种广义逆不仅具有增补方程个数的作用,而且还具有对修正模型的参考基增补高阶理论模态信息的功能。通过本文论证,文[2][4]之解的唯一性问题明确解决了,即为一个实用完备模态空间中的确定解。     

正态模型结构可靠性贝叶斯下限的计算方法

本文对正态模型结构可靠度的贝叶斯精确下限的评估公式提供一种新的计算方法。该方法能达到任意给定的精度。计算复杂度可由O(n~2)降为O(n)。程序结构简单,使用方便。     

缠绕复合材料喷管静力分析

本文对由一般曲线旋转得到的喷管进行了静力分析。文中讨论的喷管由缠绕复合材料构成,承受轴对称和非轴对称载荷作用。在采用有限元法分析时,通过Fourier转换将三维问题简化为二维求解。弹性矩阵中各参数采用合理假设只需由层状平面内三个弹性常数即可确定。文中给出缠绕复合材料喷管在内压和集中力作用下的位移分布算例,结果合理。本文推荐方法可供缠绕柔性喷管和其它类似结构分析时参考。     

Real time localization of gamma ray bursts with INTEGRAL

The INTEGRAL satellite has been successfully launched in October 2002 and has recently started its operational phase. The INTEGRAL burst alert system (IBAS) will distribute in real time the coordinates of the gamma ray bursts (GRBs) detected with INTEGRAL. After a brief introduction on the INTEGRAL instruments, we describe the main IBAS characteristics and report on the initial results. During the initial performance and verification phase of the INTEGRAL mission, which lasted about two months, two GRBs have been localized with accuracy of 2–4 arcmin. These observations have allowed us to validate the IBAS software, which is now expected to provide quick (few seconds delay) and precise (few arcmin) localization for 10–15 GRBs per year.