再入飞行器和模型转换雷诺数计算

本文采用近似的激波关系、球锥体压力分布、平衡气体状态方程、边界层厚度计算公式及转捩准则等,按照流管法计算了4种再入飞行器的外流转捩雷诺数和转捩距离,并给出了高硅氧、碳石英、碳碳球锥模型的转捩雷诺数范围,对再入飞行器和模型的计算结果作了分析和比较。     

Mechanism of error propagation from the subdaily Universal Time model into the celestial pole offsets estimated by VLBI

Within the analysis of space geodetic observations, errors of the applied subdaily Earth rotation model can induce systematic effects in different estimated parameters. In this paper, we focus on the impact of the subdaily Universal Time (UT1) model on the celestial pole offsets (CPO) estimated from very long baseline interferometry (VLBI) observations. We provide a mechanism that describes the error propagation from the subdaily UT1 into the daily CPO.In typical 24-h VLBI sessions the observed quasars are well distributed over the sky. But the observations, if looked at from the Earth-fixed frame, are not homogeneously distributed. The amount of observations performed in different terrestrial directions shows an irregularity which can be roughly compared to the case where the observations are collected in only one Earth-fixed direction. This peculiarity leads to artefacts in VLBI solutions, producing a correlation between the subdaily variations in UT1 and the position of the celestial pole. As a result errors in diurnal terms of the subdaily UT1 model are partly compensated by the estimated CPO. We compute for each 24-h VLBI session from 1990 until 2011 the theoretical response of the CPO to an error in the subdaily UT1 by setting up a least-squares adjustment model and using as input the coordinates of the observed quasars and observation epochs. Then real observed response of the estimated CPO derived from the VLBI session solutions is compared to the predicted one. A very good agreement between the CPO values estimated from VLBI and the predicted values was achieved. The presented model of error propagation from the subdaily UT1 into the daily CPO allows to predict and explain the behaviour of CPO estimates of VLBI solutions computed with different subdaily Earth rotation models, what can be helpful for testing the accuracy of different subdaily tidal models.     

关于模糊逻辑系统及其建模函数的数学描述

模糊逻辑系统按真值化处理与推量规则导出最优系统数学表达式。在线性定常状态下,分别建立起连续与间断系统的数学模型,归纳出模糊控制的等效解法。并应用模糊数学算法,对一非线性实例绘制出双模控制框图。     

静止叶栅三维粘性数值模拟

应用Ｎ－ Ｓ方程压力修正算法和ｋ－ ε两方程湍流模型,对端弯叶片和基准（无端弯）叶片的平面叶栅进行了三维粘性数值模拟。在采用简单交错网格的情况下,通过对计算控制体通量的速度进行修正的方法解决了Ｎ－ Ｓ方程压力修法算中遇到的压力场和速度场呈锯齿状分布的问题。用实验测量值对本数值模拟方法的精度和可靠性进行了检验     

飞机飞行载荷测量载荷方程的优选

介绍用应变计方法测量飞机飞行载荷的载荷方程,应用方差分析和下检验技术进行优选,逐次剔除无应电桥和多余电桥,经自动计算,得到仅会对某种载荷有显著贡献的少量电桥的最优载荷方程,供飞行试验测量飞机飞行载荷使用。算例结果表明,此方法获得最优载荷方程有效。     

低Weber数射流撞击雾化的数学模型

通过分析低Weber数无粘射流撞击形成液膜雾化的特征, 由质量守恒和动量守恒, 并借鉴前人的理论和实验结果, 推导出Taylor心形波作用下计算液膜厚度和形状的近似解析式, 数值计算结果与文献所给实验数据基本吻合一致。结合矩形喷孔形成的扇形液膜的破碎理论, 进一步计算了不同撞击角下雾化形成液滴尺寸的大小及分布。      

GD钢贝氏体相变动力学研究

利用Ｆｏｒｍａｓｔｏｒ－Ｆ全自动相变仪对ＧＤ钢贝氏体相变动力学进行了系统的研究。结果表明,ＧＤ钢贝氏体等温转变相变动力学曲线可以用Ｊｏｈｎｓｏｎ－Ｍｅｈｌ型方程精确地加以描述。根据贝氏体相变的总激活能判断,试验钢上、下贝氏体相变的过渡温度约为２８５℃。     

复杂动态系统实时仿真模型自动生成

提出了一种表示复杂动态系统数学模型的分层结构,探讨了模型变量与参数在实时仿真程序中的引用－赋值关系,提出了一个既包含了模型的数学特征,又包含了模型实时运行所需的信息的实时仿真模型分层结构。在此基础上设计了一个实时仿真模型库及实时仿真模型自动生成系统。     

采用等高线地图的CGF地域表示和推理

采用等高线地图作为分布交互仿真环境中计算机生成兵力的地域表示.介绍等高线电子地图下计算机生成兵力系统地域表示和推理的一种方法.通过对地域显示、通视性检测和地形检测等几个基本问题的分析,表明采用该方法是可行的.具有地域表示范围大、地域推理简单明了的特点,并且地域数据真实、修改方便.这种方法比多边形地域表示法更适用于海上和空中大范围训练作战环境的仿真.     

Design and optimization of a novel electrically controlled high pressure fuel injection system for heavy fuel aircraft piston engine

The heavy fuel compression ignition engines are widely equipped as aircraft piston engines. The fuel injection system is one of the key technologies that determines the performance of engine. One of the main challenges is to precisely control the injected fuel quantity and flow rate in the presence of pressure fluctuation. This challenge is even more serious for heavy fuel. An original design for electrically controlled high pressure fuel injection system called Multi-Pumppressure-reservoirs fuel injection System(MPS) was demonstrated to reduce the pressure fluctuation and help keep injection stable. MPS was compared with an ordinary high pressure Common Rail fuel injection System(CRS). This work established one-dimensional AMESim and mathematical models for both CRS and MPS to study the effect of different structures and geometric parameters on the pressure fluctuations. The calculations show that the average fuel pressure fluctuation of MPS can be reduced by 57% for the crankshaft speed of 1900 r/min, and the pressure fluctuation before injection reduced by 100%. It is concluded that the pressure performance of MPS is less sensitive to pressure reservoir volume than that of CRS, and there is an opportunity for further volume reduction.