模型预测控制在永磁同步电机系统中的应用发展综述

随着数字技术的发展,模型预测控制(MPC)已经广泛应用于交流传动系统。首先介绍了经典MPC策略——有限控制集MPC和连续控制集MPC的原理。其次综述了多步预测控制、多矢量预测控制、具有参数鲁棒性的预测控制、广义模型预测、显式模型预测这些常见的改进MPC的研究现状,并提出相关研究思路。最后,根据MPC的应用需求和研究现状,展望了未来需要进一步深入和拓展的研究方向。     

无刷双馈电机静止坐标系数学模型的研究

由于没有电刷和滑环,提高了运行的可靠性,降低了维护成本,因此无刷双馈电机(BDFM)在变速恒频发电领域有着广阔的应用前景。由于特殊的结构和工作原理,BDFM数学模型十分复杂。从BDFM多回路空间矢量数学模型出发,推导出了两个静止坐标系之间的坐标变换关系以及功率绕组静止坐标系数学模型和控制绕组静止坐标系数学模型,推导过程简洁明了。所得结果为BDFM理论分析和不同控制策略的研究提供了理论基础。MATLAB/Simulink环境下的仿真结果验证了数学模型及坐标变换关系的正确性。     

Fault diagnosis based on measurement reconstruction of HPT exit pressure for turbofan engine

Aero-engine gas path health monitoring plays a critical role in Engine Health Management(EHM). To achieve unbiased estimation, traditional filtering methods have strict requirements on measurement parameters which sometimes cannot be measured in engineering. The most typical one is the High-Pressure Turbine(HPT) exit pressure, which is vital to distinguishing failure modes between different turbines. For the case of an abrupt failure occurring in a single turbine component, a model-based sensor measurement reconstruction method is proposed in this paper. First,to estimate the missing measurements, the forward algorithm and the backward algorithm are developed based on corresponding component models according to the failure hypotheses. Then,a new fault diagnosis logic is designed and the traditional nonlinear filter is improved by adding the measurement estimation module and the health parameter correction module, which uses the reconstructed measurement to complete the health parameters estimation. Simulation results show that the proposed method can well restore the desired measurement and the estimated measurement can be used in the turbofan engine gas path diagnosis. Compared with the diagnosis under the condition of missing sensors, this method can distinguish between different failure modes, quantify the variations of health parameters, and achieve good performance at multiple operating points in the flight envelope.     

HB-2 high-velocity correlation model at high angles of attack in supersonic wind tunnel tests

Responding to a need for experimental data on a standard wind tunnel model at high angles of attack in the supersonic speed range, and in the absence of suitable reference data, a series of tests of two HB-2 standard models of different sizes was performed in the T-38 trisonic wind tunnel of Vojnotehnickˇi Institut(VTI), in the Mach number range 1.5–4.0, at angles of attack up to+30°. Tests were performed at relatively high Reynolds numbers of 2.2 millions to 4.5 millions(based on model forebody diameter). Results were compared with available low angle of attack data from other facilities, and, as a good agreement was found, it was assumed that, by implication, the obtained high angle of attack results were valid as well. Therefore, the results can be used as a reference database for the HB-2 model at high angles of attack in the supersonic speed range, which was not available before. The results are presented in comparison with available reference data, but also contain data for some Mach numbers not given in other publications.     

点火瞬态过程仿真模型参数辨识

建立了固体火箭发动机点火瞬态过程一维非定常流场仿真模型,采用系统辨识方法进行了模型参数不确定性研究。基于点火试验用缩比发动机试验结果,得到了传热模型参数和瞬态燃速模型参数的最优估计,提高了点火瞬态过程一维仿真模型的预估精度。采用近似方法,构建Kriging近似函数,有效解决了一维非定常流场仿真的计算复杂性问题。     

价电子分形燃烧模型在高能固体推进剂中的应用

在价电子燃烧模型的基础上引进分形理论,提出复合固体推进剂的价电子分形燃烧模型,在此基础上进行了高能固体推进剂燃速和压强指数的模拟计算,研究了固体填料粒径和压力对燃速的影响规律。结果表明,价电子分形燃烧模型适用于高能固体推进剂的燃烧性能计算,燃速及压强指数模拟计算结果与测试结果吻合较好,大部分误差在±10%范围以内。     

军用飞机环境适应性评价模型

阐述了作战飞机面临的环境,分析了各种环境因素对军用飞机作战性能的影响,建立了军用飞机环境适应性评价指标体系。确定了机场环境剖面和衡量各个评价因素样本数据的方法,并提出了军用飞机环境适应性评价模型,通过实例验证了模型的合理性和方法的可行性。算例和分析结论表明,该模型反映了军用飞机在环境适应性方面的技术要求,同时也为军用飞机在环境适应能力上的改进提供了参考。     

结构的概率-非概率混合可靠性模型

将影响结构可靠性分析的不确定性因素用概率和非概率两种方式模拟。并基于结构可靠性分析中的概率可靠性模型和非概率集合可靠性模型,提出一种新的结构可靠性分析的概率-非概率混合模型。该模型首先通过将功能函数进行非概率可靠性分析,然后将标准化区间变量空间所有区域的可靠度进行求和计算,从而给出结构的可靠度。并根据相同的不确定信息,由混合可靠性模型与概率可靠性模型得到的结果是相等的,证明了方法的有效性。最后,通过一个典型结构和一个机翼下壁加筋板与传统概率可靠性模型进行比较,表明该混合模型对于结构的分析和设计更为合理,能够更好地保证结构的安全性。     

镍基单晶合金蠕变研究:试验、机理及材料模型

在镍基单晶合金高温蠕变建模研究工作的第一部分,通过对DD6镍基单晶合金不同中断时间的高温蠕变试验及透射电镜(TEM)观察,结合单晶合金蠕变机理的研究成果阐明了单晶高温蠕变的机理,并从Orowan方程出发,在晶体塑性理论框架下建立描述晶体滑移系上位错演化规律的方程,发展了以位错密度变化表征镍基单晶高温蠕变的材料模型.该模型考虑了较宽温度与载荷范围内单晶的主要蠕变机理,可较好地建模750～1100℃范围内镍基单晶的各向异性蠕变行为.      

开孔Voronoi泡沫支柱形状变化对力学性能的影响

针对开孔泡沫材料提出了新的支柱形状控制方程,并在Voronoi随机泡沫模型基础上,研究了支柱形状变化对其各向同性弹性性能、非线性压缩和拉伸力学行为的影响;讨论了支柱细腰程度和模型随机度共同作用的影响效果,并比较了两种因素作用效果的大小.结果表明,支柱细腰程度的增大明显降低了泡沫材料的弹性模量和无量纲应力.同时,支柱细腰程度对泡沫力学性能的影响要大于模型随机度的影响,并随模型随机度的增加而增大.