基于双磁钢转子的大力矩飞轮用电机设计

针对卫星快速敏捷和大角度机动的需求,设计了一种基于双磁钢转子的大力矩飞轮用永磁电机。介绍了大力矩飞轮用电机的工作原理和结构构成,给出了主要尺寸的设计准则,并在Maxwell 环境下对双磁钢转子的永磁直流电动机进行了有限元分析。     

利用非交错对称矩阵构造Cartesian认证码

利用特征为2的有限域上非交错对称矩阵构造了一个Cartesian认证码，并计算出其参数。进而，假定编码规则按照均匀的概率分布所选取，计算出了该码被模仿攻击成功的最大概率只和被替换攻击成功的最大概率Ps。     

电磁轴承及其应用 第二部分 电磁轴承工作原理和设计要点

第一部分简述了电磁轴承及电传动技术在国内外的发展及其在航空领域的应用前景.第二部分介绍了燃气涡轮发动机用电磁轴承的设计要求和主要设计问题及其解决方法.     

星间洛仑兹力编队飞行的平衡点及零速度曲面

提出了一种新的利用星间洛仑兹力控制卫星相对运动的方法:使主星产生自旋磁场,副星带电,通过控制副星所受的星间洛仑兹力进行编队。假设主星产生的人造磁场表现为偶极子并且运动在一条开普勒圆形轨道上,副星恒定带电并在主星附近运动,同时假设星间洛仑兹力只影响副星的运动而不影响主星的运动。推导了副星在主星HCW(当地垂直当地地平坐标系)坐标系下的相对运动动力学方程。针对偶极子与HCW坐标轴X轴重合的情况下,推导了动力系统下的平衡点(并采用稳定性分析方法分析其线性化意义下的稳定性)、积分常数和零速度曲面,证明了有界相对运动的存在。最后用数值仿真验证了上述结论。     

大功率无电极高密度等离子体电磁推进概述

无电极高密度等离子体电磁推进技术已成为未来深空探测、载人航天和货运、太阳能电站以及航天器在轨服务与维护等空间任务中极具竞争力的核心推进技术之一。在梳理不同无电极等离子体电磁加速机制基础上,开展大功率无电极高密度等离子体电磁推进技术性能对比,给出新概念无电极场反构型电磁推进技术向未来超大功率拓展的优势和发展潜力,同步分析了该技术亟需解决的关键基础问题,旨在为中国新概念场反构型电磁推进技术的研发提供理论基础。     

(70~100)MeV准单能中子参考辐射场设计

国内基于串列加速器建立了144keV~15MeV的单能中子参考辐射场,解决了20MeV以下能区中子探测器注量、剂量等参数的量值溯源,但尚未建立20MeV以上能区准单能中子参考辐射场。随着航天空间中子探测任务的需要以及地面高能质子加速器的发展,20MeV以上能区准单能中子参考辐射场需求越来越突出。发展20MeV以上能区高能中子参考辐射场对于满足国防需求、推动中子计量学科发展具有重要意义。     

Reconstructed 3-d magnetic field structure and hard X-ray two ribbons for 2000 Bastille-day event

The Bastille-day event in 2000 produced energetic 3B/X5.6 flare with a halo CME, which had great geo-effects consequently. This event has been studied extensively and it is considered that it follows the two-ribbon flare model. The flare/CME event was triggered by an erupting filament and TRACE observations showed formation of giant arcade structures during the flare process. Hard X-ray (HXR) two ribbons revealed for the first time in this flare event (Masuda et al., 2001). The reconstruction of 3-D coronal magnetic fields revealed a magnetic flux rope structure, for the first time, from extrapolation of observed photospheric vector magnetogram data and the flux rope structure was co-spatial with portion of the filament and a UV bright lane (Yan et al., 2001a, 2001b). Here we review some recent work related to the flux rope structure and the HXR two ribbons by comparing their locations and the flux temporal profiles during the flare process so as to understand the energy release and particle accelerations. It is proposed that the rope instability may have triggered the flare event, and reconnection may occur during this process. The drifting pulsation structure in the decimetric frequency range is considered to manifest the rope ejection, or the initial phase of the coronal mass ejection. The HXR two ribbons were distributed along the flux rope and the rope foot points coincide with HXR sources. The energy dissipation from IPS observations occurred within about 100 R _⋅ is consistent with the estimate for the flux rope system. This revised version was published online in August 2006 with corrections to the Cover Date.     

Theoretical Advances in Prominence Seismology

Prominence seismology is a rapidly developing topic which seeks to infer the internal structure and properties of solar prominences from the study of its oscillations. An extensive observational background about oscillations in quiescent solar prominences has been gathered during the last 70 years. These observations point out the existence of two different types of oscillations: Flare-induced oscillations (winking filaments) which affect the whole prominence and are of large amplitude and small amplitude oscillations which seem to be of local nature. From the theoretical point of view, few models have been set up to explain the phenomenon of winking filaments while, on the contrary, for small amplitude oscillations a large number of models trying to explain the observed features have been proposed.     

多导线对称分布原子磁分束器和干涉仪设计分析

提出了采用多根对称分布载流导线构成原子分束器的方法,包括三导线和四导线磁导引。阐述了原子分束器的分束机制,用Ansoft Maxwell 2D软件计算给出了部分载流导线移动到不同位置时的磁场分布图。通过分析了导引中心的变化,发现只要通过改变载流导线之间的相对位置就可以来实现从单路到双路导引和三路导引的转换。由此分别设计由3根对称分布载流导线构成的原子双路分束器和4根对称分布载流导线构成三路分束器,然后运用Monte Carlo方法模拟验证其原子分束功能。最后以三线对称分布分束器为基础构成Mach-Zehnder原子磁干涉仪。     

L10结构金属间化合物空位形成能

L1₀结构CoPt和FePt 薄膜因其高磁各向异性而成为新一代超高磁记录密度材料.采用Miedema理论计算了多种L1₀结构金属间化合物的空位形成能.研究结果表明:在这些金属间化合物中可能形成的空位类型,如FeNi和MnNi合金中易形成Ni空位;FePt和FePd合金中易形成Fe空位;CoPt合金中易形成Co空位;NiPt合金中易形成Ni空位;MnPt合金中易形成Pt空位;MnPd和MnHg合金中易形成Mn空位;MnRh合金中易形成Rh空位.这一研究结果为进一步研究开发高性能的磁性薄膜提供了理论依据.