电视导引头图像闪烁故障分析

针对电视导引头存在的“图像闪烁”故障，重点分析了故障的常发生部位，如硅靶管、CCD、图像处理电路和电视摄像机光圈等，并从故障部位的结构特点和工作原理入手，详细阐述了故障产生的原因、机理以及排故方法，为同类故障的修理提供参考。     

某型直升机旋翼转速表的数字化设计方案

提出某型直升机数字旋翼转速表的研制方案,给出以频率/数字(F/D)变换电路为核心的主要硬件原理,分析了采样误差的产生及抑制误差的措施.装机部件研制成功证实了方案的可行性.     

基于变速积分的高速电机磁悬浮控制系统设计

针对磁悬浮高速电机的磁轴承-转子系统,设计了基于MCU+FPGA的数字控制系统。为实现转子系统的高转速下稳定控制,在建立了磁轴承-转子闭环控制系统模型的基础上,针对常规PID控制系统的超调振荡问题和PD控制系统的转子位移静差问题,利用变速积分的思想设计了改进的PID控制器。实验表明,在消除了系统静差的同时明显减小了系统的超调量和调节时间,说明设计的控制系统具有很好的动态特性和稳态精度。     

Effects of sector structure of the interplanetary magnetic field on the upper mesosphere–lower thermosphere dynamics

In this paper we study the influence of the interplanetary magnetic field (IMF) polarity changes caused by the Earth passing through the IMF sector boundary on the dynamic processes taking place in neutral atmosphere within the altitude interval of the upper mesosphere–lower thermosphere (83–101 km). The analysis has revealed the influence of the IMF sector structure on dynamics of the upper mesosphere–lower thermosphere. There has been a significant seasonal variation of the wind reaction to the IMF polarity changes observed. The influence of the IMF polarity changes on neutral atmosphere dynamics within the altitude range of 83–101 km is most pronounced in the zonal component of neural wind when the IMF polarity changes from negative to positive in all the seasons except for spring and when IMF polarity changes from positive to negative – in spring only.     

沉淀硬化不锈钢的应用工艺探讨

阐述了沉淀硬化不锈钢（ＺＧｏＣｒ１６Ｎｉ４ＮｂＣｕ３）在铸造、热处理、无损探伤过程中易出现的问题及解决方法。     

The damping of small-amplitude oscillations in quiescent prominences

The presence of small-amplitude oscillations in prominences is well-known from long time ago. These oscillations, whose exciters are still unknown, seem to be of local nature and are interpreted in terms of magnetohydrodynamic (MHD) waves. During last years, observational evidence about the damping of these oscillations has grown and several mechanisms able to damp these oscillations have been the subject of intense theoretical modelling. Among them, the most efficient seem to be radiative cooling and ion-neutral collisions. Radiative cooling is able to damp slow MHD waves efficiently, while ion-neutral collisions, in partially ionised plasmas like those of solar prominences, can also damp fast MHD waves. In this paper, we plan to summarize our current knowledge about the time and spatial damping of small-amplitude oscillations in prominences.     

Spin-stabilized satellite magnetic attitude control scheme without initial detumbling

The angular motion of an axisymmetrical satellite equipped with an active magnetic attitude control system is considered. The dynamics of the satellite are analytically studied on the whole control loop. The control loop is as follows: preliminary reorientation along with nutation damping, spinning about the axis of symmetry, then precise reorientation of the axis of symmetry in inertial space. Reorientation starts right after separation from the launch vehicle. Active magnetic attitude control system time-response with respect to its parameters is analyzed. It is proven that low-inclined orbit forces low control system time-response. Comparison with the common control scheme shows the time-response gain. Numerical analysis of the disturbances effect is carried out and good pointing accuracy is proved.     

Tilts and polarity separation in the sunspot groups and active regions at the ascending and descending phases of the cycle 23

The Solar Feature Catalogues for sunspots and active regions measured with SOHO/MDI instrument and Ca II K3 spectroheliograph of the Paris-Meudon Observatory are analyzed with the automated classification technique for sunspot groups and active region polarities. We report the first classification results for daily variations of tilt angles (normal and trigonometric ones) in sunspot groups (SG) and active (AR) regions in the cycle 23. The average normal tilts are presented for every year at the ascending and descending phases of the cycle 23 which are similar to those deduced by other authors for the cycles 19–22. The normal tilts of both the sunspot groups and active regions are shown to increase in the ascending phase and a decrease in the descending phase. Similar to SG and AR areas, the trigonometric tilts are shown to have the noticeable North–South asymmetry with the Southern hemisphere dominant in the selected ascending and descending periods. The normal tilt variations with latitude follow Joy’s law revealing a periodicity along the meridian of about 10° and reaching the maximum of 14° at the latitude of about 32° corresponding to the top of the ‘royal zone’ where the sunspots appear. The variations of polarity separation with a latitude are in an anti-phase with those of the tilts reaching a maximum at the latitude of 35° and showing a small positive separation for the groups/active regions in a vicinity of the average tilts ±40°. The ratio R of the polarity separation to the trigonometric tilt fits the linear function of a latitude φ as R = −0.0213φ − 0.1245 confirming positive separation for the polarities of active regions with the average tilts, or the dominance of activity in the Southern hemisphere activity, for the selected period of observations.     

The method for predicting solar proton events

Dynamic processes in the interplanetary space have been investigated using time variations in time parameters of the cosmic-ray rigidity spectrum. Change of heliosphere electromagnetic characteristics has been found out to precede sporadic phenomena on the Sun. In particular, it is shown that sporadic phenomena are followed by generation of local polarization electric fields, decrease of the magnetic-field strength in small-scale heliospheric structures, and increase of the potential difference between the pole and the plane of the ecliptic. These features allow prediction of solar proton events in advance (from several hours to several tens of hours) with a high degree of confirmation.     

平面波导器件封装工艺软件的研究与开发

平面波导器件的耦合封装是制约其发展的一个瓶颈,通过研究平面波导器件的封装工艺特点,分析了封装过程对控制系统的要求.基于Visual Basic.Net开发了封装工艺软件,研究了手动调整、视觉引导粗对准、自动化对准以及点胶固化四个模块的设计方法,并对编程过程中的关键技术进行了讨论.