Effect of assisted transverse magnetic field on distortion behavior of thin-walled components in WEDM process

Machining performance of thin-walled components made by aeronautical difficult-toprocess materials is a significant issue in the aviation manufacturing industry. Although wire electric discharge machining-low speed(WEDM-LS) is one of typical non-contact machining processes without macro cutting force, which does well in removing hardness and brittleness materials via pulsed discharge at high temperature, but few researchers have studied the thermal distortion behavior leading to a considerable g...     

利用近地点磁场探测数据确定卫星自旋轴参数

阐述了利用近地点磁场探测数据确定卫星自旋轴参数的理论方法和实施步骤,并说明了这种研究对卫星运行和科学探测的重要性.特别强调了需要注意的基本条件,即卫星必须自旋稳定且近地点不很高(1000 km以下).这种方法关键的步骤是,根据卫星轨道数据定出模型磁场数值,比较近地点星载磁强计探测数据和近地点地磁模型数值确定卫星自旋轴的指向.通过对TC-1和TC-2卫星姿态的具体计算,对确定精度和应用效果进行了分析和比较.结果表明,在实际的卫星应用过程中此方法和措施非常有效,在科学分析和将来的卫星运行工程中具有重要的应用意义.      

磁悬浮球系统的一种非线性控制方法研究

介绍了磁悬浮球系统的数学模型,并构造了一种非线性状态观测器;其次,设计了一种非线性PID控制器对误差进行控制;最后,应用MATLAB工具对闭环系统进行了仿真。仿真结果表明,该非线性PID控制器可以改善系统响应的品质,实现快速无超调调节效果,并且控制器的参数可以在较大范围变化,具有较强的鲁棒性。     

多个空间高斯源信号情况下成组三维图像特征提取方法

针对功能磁共振成像数据中含有多个高斯信号源的盲源分离问题,介绍了一种成组典型相关分析方法(Group BSS-CCA)。这个方法的组分析框架参照了GIFT工具箱中的Group ICA算法,具体的典型相关分析方法应用的是Friman等人提出的BSS-CCA算法。以验证该方法的有效性为目的,设计了仿真实验;结果表明,该方法能较好识别出混合在人脑功能磁共振成像数据的2个空间高斯信号。Group BSS-CCA算法对研究人脑的功能磁共振成像数据具有较高的实用价值。     

航空发动机磁力密封设计与试验研究

简要介绍了磁力端面密封的工作原理,研究了这种密封的设计要点及上进行了性能、耐久性及寿命试验.试验结果表明,磁力端面密封具有密封性能优异、寿命长等优点,基本能够满足某型发动机研制的需要.     

基于等离子体磁壳的行星探测器制动机理研究

等离子体磁壳制动技术是一种新型的行星探测器制动手段，具有制动阻力可调、可靠性高、结构质量小等优势，具有潜在的应用前景。开展了等离子体磁壳制动产生方式与工作机理的数值仿真研究。首先，以火星探测器的制动为背景，将等离子体磁壳简化为圆柱构型，建立了等离子体磁壳宏观模型，得到了制动阻力、有效捕获面积和探测器速度随轨道高度的变化关系。随后以等离子体磁壳中离子、电子和次中性粒子之间的相互作用为研究对象，建立了等离子体磁壳微观模型，获得了等离子体粒子数密度和温度随时间变化的规律。微观模型与宏观模型计算出的制动阻力一致，验证了两种模型的有效性。     

Static magnetic field analysis of hollow-cup motor model and bow-shaped permanent magnet design

The hollow-cup Permanent Magnet (PM) motors have the characteristics of low power consumption, and are widely used in the aerospace field. At present, the tile-shaped PMs used by hollow-cup PM motors have poor sinusoidal characteristics of the air gap magnetic flux density waveform, which will cause torque ripple. The existing method for improving the air gap magnetic flux density waveform is not very effective when applied to hollow cup, a special motor with no stator core and large air gap. A bow-shaped PMs structure is designed for the hollow-cup motor in this paper. First, the equivalent surface current method is used to calculate the analytical formula of the static magnetic field of the model. Then, the Finite Element (FE) method is used to calculate the static air gap flux density waveform of conventional tile-shaped PMs and bow-shaped PMs with different bow heights, and the corresponding harmonics and sine distortion are obtained by Fourier decomposition. The simulation results show that the bow-shaped PMs can effectively improve the sinusoidal characteristics of the static air gap flux density waveform. And the suitable bow height is determined. Finally, a prototype is made based on the suitable bow height for experiments, and compared with the analytical result and the FE result, and the accuracy and effectiveness of the bow-shaped PMs with the suitable bow height are verified.     

A multi-parameter model of heat treatment process for soft magnetic materials on performance of HSERs

Material properties play an important role in the performance of electromagnetic mechanism. For an aeronautic Hermetically-Sealed Electromagnetic Relay (HSER), more than 50% parts are made of soft magnetic materials. Therefore, the performance of soft magnetic materials directly determines the static and dynamic characteristics of the HSER. Based on the theory of crystal recrystallization, this paper analyzes cold extrusion and heat treatment in the processing of soft magnetic materials, simulates the grain change process of an armature at different heat treatment temperatures, establishes a correlation model of temperature, grain size, and magnetic energy, and verifies results by scanning electron microscopy. Results of heat treatment temperatures from 800 °C to 920 °C are obtained and compared. A sample soft magnetic material after heat treatment at different temperatures has the largest difference in the initial magnetization range, up to 22%. In order to verify the fluctuation of the overall output characteristics of an HSER caused by the difference between soft magnetic materials, a static and dynamic analysis model of a typical HSER is established, and the accuracy of the model is verified by a set of actual test system. The difference of dynamic characteristics under different heat treatment temperatures is nearly 3%.