南航立式水洞实验技术及应用

本文介绍了南航270mm×270mm立式水洞,对水洞流态显示技术中较为关键的几个问题:如试验模型设计,彩色染色液体配方,灯光与摄影技术等进行了简述,并对其实际应用提供了几个示例,以供参考。     

小展弦比飞机非线性气动特性风洞与飞行相关性研究

在较大迎角范围，如何由风洞试验数据预计全尺寸小展弦比飞机的非线性气动特性，并与飞行值相关，始终是国际航空界致力解决的重大问题，本项研究采用风洞试验与工程计算相结合的方法，对支架，洞壁、进气，喷流，雷诺数及静弹性等影响相关性的诸因素予以修正，并计及配平影响，从而比较准确地预计出全尺寸收音机的非线性气动特性，预计值与试飞值相比较结果验证了本项研究的可靠性和实用性。     

苏联复合材料结构无损检测方法和仪器设备述评

对苏联复合材料结构无损检测方法、仪器设备、技术特长和发展方向做了简要述评,并对其采用的典型仪器设备系统技术参数给以简要介绍。最后联系我国固体火箭发动机无损检测工作实际提出了两点建议。     

面向深空探测的电磁帆推进技术研究进展

电磁帆是一类利用太阳风驱动的无工质或少工质新型推进技术,在需要推力器长时间工作的深空探测任务中具有非常广阔的应用前景。首先介绍了电磁帆的基本概念和主要分类,其次分别介绍了电帆、纯磁帆和磁等离子体帆三类推进方式的系统组成和工作原理,重点介绍了各自的研究现状,并梳理出了相关关键技术,同时介绍了等离子体磁罩技术。最后对电磁帆推进技术研究进展进行了总结,为国内开展此方面研究提供了研究方向和发展思路。     

小卫星非常规动力学分析与控制

针对小卫星研制中出现的一些非常规动力学问题进行研究,并提出解决办法。针对小卫星组件最大冲击谱量级超出常规冲击试验规范谱的分析与验证困难,通过研究提出了能够分析评估组件高量级冲击的方法。针对小卫星随机振动下强度设计方法还存在较大误差,分析了系统模态质量比与模态频率在一定频段的影响规律,认为忽略模态质量耦合会带来误差,提出了考虑模态质量耦合的准静态载荷计算方法。最后,针对小卫星整星开展了减振研究,分析了正弦和随机减振效果,对于对称安装减振系统,提出了减振系统的主频率计算公式。     

Which way is the bookstore? A closer look at the judgments of relative directions task

We present a detailed analysis of a widely used assay in human spatial cognition, the judgments of relative direction (JRD) task. We conducted three experiments involving virtual navigation interspersed with the JRD task, and included confidence judgments and map drawing as additional metrics. We also present a technique for assessing the similarity of the cognitive representations underlying performance on the JRD and map-drawing tasks. Our results support the construct validity of the JRD task and its connection to allocentric representation. Additionally, we found that chance performance on the JRD task depends on the distribution of the angles of participants’ responses, rather than being constant and 90 degrees. Accordingly, we present a method for better determining chance performance.     

Remote-controlled flexible pose measurement system and method for a moving target in wind tunnel

The measurement of position and attitude parameters for the isolated target from a high-speed aircraft is a great challenge in the field of wind tunnel simulation technology. This paper proposes a remote-controlled flexible pose measurement system in wind tunnel conditions for the separation of a target from an aircraft. The position and attitude parameters of a moving object are obtained by utilizing a single camera with a focal length and camera orientation that can be changed based on different measurement conditions. Using this proposed system and method, both the flexibility and efficiency of the pose measurement system can be enhanced in wind tunnel conditions to meet the measurement requirements of different objects and experiments, which is also useful for the development of an intelligent position and attitude measurement system. The position and the focal length of the camera also can be controlled remotely during measurements to enlarge both the vertical and horizontal measurement range of this system. Experiments are conducted in the laboratory to measure the position and attitude of moving objects with high flexibility and efficiency, and the measurement precision of the measurement system is also verified through experiments.     

Plasma polarization electric field derived from radio sounding of solar wind acceleration region with spacecraft signals

Presented is the analytical approximation of averaged solar wind velocity radial dependence in the solar wind acceleration region at heliolatitudes below 60° under low and moderate solar activity. This empirical approximation is based on the data of radio sounding of the solar corona with radio signals from various spacecraft. Deduced is an equation connecting the solar wind velocity radial dependence and the radial dependence of solar wind plasma polarization electric field intensity. This allows constructing a semi-empirical radial dependence of plasma polarization electric field corresponding to the empirical radial dependence of solar wind velocity. Main properties of the semi-empirical dependence, which is based on radio sounding data, are described.     

全模颤振双索悬挂系统刚体模态频率研究

研究绳系结构和绳索预紧力对全模颤振双索悬挂系统刚体模态频率的影响。首先，基于绳索并联机构理论，对双索悬挂系统进行静力学建模，引入加权矩阵，推导了双索悬挂系统静刚度模型；其次，建立双索悬挂系统无阻尼振荡方程，分析双索悬挂系统刚体模态频率变化规律；进而，搭建了双索悬挂系统地面样机，开展系统模态频率测试试验，研究系统刚体模态频率的影响因素及其变化规律；最后，参考试验结果修正所建数学模型。结果表明，随着绳索预紧力的增加，系统刚体模态频率呈上升趋势，但各阶刚体模态的固有频率上升速率不同，平动模态的固有频率受绳索预紧力影响比转动模态小得多；在转动模态方面，滚转模态的固有频率最大且上升快；在平动模态方面，升沉模态的固有频率大于横侧滑模态的固有频率；双索经过的机身前后滑轮与飞机模型质心之间的相对位置变化会不同程度地影响支撑系统俯仰模态、偏航模态的固有频率，但几乎不影响其滚转模态的固有频率。研究发现，通过控制悬挂绳索预紧力的大小，合理设计机身上的滑轮安装位置，能够有效降低双索悬挂系统刚体模态频率。研究结果对于优化设计全模颤振双索悬挂系统具有指导意义。