冲击加速度校准中低通滤波器的应用

介绍了在冲击加速度校准中,为了抑制电、机械等干扰和噪声对冲击加速度测量结果的影响,采用二阶巴特沃斯型低通滤波器,通过时间序列翻转、二次滤波等方式,实现零相移的低通滤波效果。并比较不同截止频率下,低通滤波器对衰减程度不同的冲击加速度波形产生的峰值偏差,给出不同加速度波形下,低通滤波器截止频率选择应注意的问题。     

A lunar cargo mission design strategy using variable low thrust

A design technique for a near optimal, Earth–Moon transfer trajectory using continuous variable low thrust is proposed. For the Earth–Moon transfer trajectory, analytical and numerical methods are combined to formulate the trajectory optimization problem. The basic concept of the proposed technique is to utilize analytically optimized solutions when the spacecraft is flying near a central body where the transfer trajectories are nearly circular shaped, and to use a numerical optimization method to match the spacecraft’s states to establish a final near optimal trajectory. The plasma thruster is considered as the main propulsion system which is currently being developed for crewed/cargo missions for interplanetary flight. The gravitational effects of the 3rd body and geopotential effects are included during the trajectory optimization process. With the proposed design technique, Earth–Moon transfer trajectory is successfully designed with the plasma thruster having a thrust direction sequence of “fixed-varied-fixed” and a thrust acceleration sequence of “constant-variable-constant”. As this strategy has the characteristics of a lesser computational load, little sensitivity to initial conditions, and obtaining solutions quickly, this method can be utilized in the initial scoping studies for mission design and analysis. Additionally, derived near optimal trajectory solution can be used as for initial trajectory solution for further detailed optimization problem. The demonstrated results will give various insights into future lunar cargo trajectories using plasma thrusters with continuous variable low thrust, establishing approximate costs as well as trajectory characteristics.     

IMPROVEMENT OF PHASE GRADIENT AUTOFOCUS ALGORITHM

ＩＭＰＲＯＶＥＭＥＮＴＯＦＰＨＡＳＥＧＲＡＤＩＥＮＴＡＵＴＯＦＯＣＵＳＡＬＧＯＲＩＴＨＭＬｉＬｉｗｅｉ（李立伟），ＭａｏＳｈｉｙｉ（毛士艺），ＡｓｉｆＲａｚａ，ＬｉｕＹｉｎｇ（刘莹）（ＤｅｐａｒｔｍｅｎｔｏｆＥｌｅｃｔｒｏｎｉｃＥｎｇｉｎｅｅｒｉｎｇ...     

Real-time coseismic wave retrieving by integrated Kalman filter with observations of GPS,Glonass and strong-motion sensor

A method of real-time coseismic wave retrieving was proposed based on the tight integration of GPS, Glonass and strong-motion sensor observations, the validation and precision analysis have been made by an experimental data. The series of results have been shown that: by the integrated Kalman filter and multi-sensors, the coseismic waves can be optimally recovered by complement the advantages of each other, especially when the observation conditions are very bad. In additional, the results are not significantly effected by different receiver clock error processes for the integration solution.     

变截面悬臂梁结构动载荷辨识方法

在航空航天领域，作用在结构上动载荷的确定对结构健康监测是非常必要和重要的。为此，本文以类似机翼结构的变截面悬臂梁结构为研究对象，提出了一种基于光纤光栅传感器与卡尔曼滤波器的动载荷识别方法。首先，根据变截面梁单元形式，推导出变截面梁的质量矩阵与刚度矩阵，建立动力学运动方程。然后，以光纤光栅传感器测得的应变信息作为观测信号，通过卡尔曼滤波器生成的增益矩阵、新息序列矩阵以及协方差矩阵，得到灵敏度矩阵和估计力的增益矩阵。在此基础上，利用广义回归模型及其最小二乘算法，估算出动载荷大小、判断出动载荷激励位置。借助数值仿真与实验手段，分别验证了该方法对于单点正弦激励、方波激励、锯齿波激励以及多点同时激励等工况下的动载荷识别效果。结果表明，本文所提算法具有较好的动载荷识别效果和噪声抑制能力，能够为未来风洞试验和真实飞行试验环境中诸如大展弦比机翼表面气动压力等载荷实时辨识、气动外形自适应控制以及结构健康监测提供技术支撑。     

Command filtered sliding mode trajectory tracking control for unmanned airships based on RBFNN approximation

This paper presents two sliding mode controllers to address the trajectory tracking problem of unmanned airships in the presence of unknown wind disturbance. The sliding mode controller proposed first is designed by a fast power rate reaching law(FPRRL). The disturbance is compensated by a radial basis function neural network (RBFNN). To avoid the aggressive adaptation, the controller is augmented by a command filter. The controller provides good robustness and tracking performance with no chattering under the hypothesis of ideal wind field. However, serious chattering occurs when simulation is performed under discontinuous wind field. To simulate the wind in practice, the wind field employed in the simulation is generated by the combination of a constant field and white noise. The controller is improved subsequently with an extended model to suppress the chattering induced by the white noise. The enhanced controller manipulates the derivation of system input, thus attenuating the chattering. Stability analysis shows that both controllers drive the tracking error into a controllable small region near zero. Simulations are provided to validate the performance of the proposed controllers under different wind hypothesis.     

桩土阻尼作用下低应变法可测桩长的分析

低应变检测是桩身完整性检测的一种常用方法。桩土的阻尼作用是造成应力波传播过程中衰减的关键因素。利用一维波动理论，建立桩土相互作用的方程，得到了波幅比与桩长、波速等因素的关系，进而得到检测中可测得的最大桩身长度范围。同时，利用ANSYSLS—DYNA进行模拟，从而验证了波在桩身传播过程中的衰减特性和计算所得结果的正确性。为该方法的克服局限的进一步研究起到一定的参考作用。     

空时自适应处理张量波束成形器的外积合成法

为了解决空时自适应处理（Space-Time Adaptive Processing，STAP）对足量平稳训练快拍的要求，给出了一种设计STAP张量波束成形器的新算法——空时自适应处理张量子波束合成（TSS-STAP）法。分析表明：STAP中所需要的张量波束成形器，可首先在张量的各个子维度上分别进行子波束成形器的设计，然后再由张量的外积运算合成各子波束成形器而得到。进一步分析表明：由于本文算法可在较低自由度（DoF）的子维度上对张量波束成形器进行设计，因此降低了设计所需要的训练快拍数和计算复杂度，同时也实现了有效的去相关处理，使得其在非均匀杂波环境下有更好的目标检测性能。在仿真实验中，所提算法有效提升了目标检测结果，同时降低了目标检测所消耗的时间。     

低雷诺数下高负荷轴流压气机表面粗糙度流动调控机制

以某1.5级高负荷轴流压气机为研究对象,采用经过校核的数值模拟手段详细探究了低雷诺数下表面粗糙度对其气动性能及内部流场的影响.结果表明:相比于光滑叶片,表面粗糙度为137.8时压气机性能提升最为明显,总压比、堵塞流量以及峰值效率分别提升4.01％、2.24％、5.34％.在整个表面粗糙度大小范围内,表面粗糙度布置在吸力...