遥感卫星的地面覆盖与轨迹控制

对遥感卫星的地面覆盖进行了分析，提出了为满足应用要求及有效载葆地面覆盖，卫星轨道的的选择方法。文中还讨论了地面轨迹的漂移及为了满足地面覆盖的地面轨这保持问题。     

低特征信号绝热层用硅氧烷树脂研究

简述了用于固体火箭发动机低特征信号绝热层研制的发展现状。对多种硅氧烷树脂（ＲＴＶ）进行了筛选和信号透过率，热失重，力学及粘接笥能试验。试验结果表明，与使用ＥＰＤＭ绝热层材料相比，使用ＲＴＶ绝热层材料，火箭发动机燃烧室羽流具有较高的信号透过率；ＲＴＶ还具有较好的热性、力学及粘接性能，适于用作低特征信号绝热层的基体材料。     

人造地球卫星初轨计算的单位矢量法

本文在建立两组单位矢量系统Ｒ＊，Ｓ＊，φ＊和ρ＊，Ａ＊，ｈ＊的基础上，给出了初轨计算的新的条件方程形式以及对不等精度、不同类型的观测资料的加权处理方法，这对充分发挥高精度测距资料ρ和测速资料ρ·的作用十分有利。实测计算表明，本方法基本解决了初轨计算中轨道半长轴不易定准的困难，并具有定轨精度高、适用范围广、稳定性能好等优点，对静止卫星转移轨道入轨段超短弧段测量资料的初轨计算，作用尤为明显。     

伴随卫星的燃料-时间优化回收

伴随卫星回收是伴星应用中的一项主要技术。航天任务需求对伴星回收问题不仅提出了最省燃料要求，而且提出了最小时间要求。本文设计了一条稳定的燃料-时间优化回收轨道。从相对运动的Hill方程出发，给出伴星回收问题描述，阐述回收轨道设计思想及稳定回收条件，提出一种有效的螺旋式回收策略，探讨参数确定方法，并对回收轨道的特点和稳定性进行分析，最后研究了燃料消耗量与回收时间及初始相位的关系。仿真结果表明，利用螺旋回收策略，可以保证伴随卫星快速、稳定回收，且能在燃料消耗量与回收时间之间寻求最佳折衷。     

椭圆轨道编队常值推力构形变化控制方法

采用T-H方程作为椭圆轨道编队的动力学描述，推导了常值推力作用下的椭圆轨道编队的构形变化控制方法。通过合理的选择控制量的作用时刻，可达到大量节约燃料的目的。结合该构形控制方法给出了燃料均衡与燃料最优的解决方案；最后，给出的仿真算例说明了本文设计方法的有效性。     

A Geosynchronous Orbit Search Strategy

Since more than 10 years there is evidence that small-size space debris is accumulating in the geosynchronous orbit (GEO), probably as the result of breakups. Two break-ups have been reported in GEO. The 1978 break-up of an EKRAN 2 satellite, SSN 10365, was identified in 1992, and in 1992 a Titan 3C Transtage, SSN 3432, break-up produced at least twenty observable pieces. Subsequently several nations performed optical surveys of the GEO region in the form of independent observation campaigns. Such surveys suffer from the fact that the field of view of optical telescopes is small compared with the total area covered by the GEO ring. As a consequence only a small volume of the orbital element-magnitude-space is covered by each individual survey. Results from these surveys are thus affected by observational biases and therefore difficult to compare. This paper describes the development of a common search strategy to overcome these limitations. The strategy optimizes the sampling for objects in orbits similar to the orbits of the known GEO population but does not exclude the detection of objects with other orbital planes. A properly designed common search strategy clearly eases the comparison of results from different groups and the extrapolation from the sparse (biased) samples to the entire GEO environment.     

Tether Satellite System Collision Study

A study was performed to determine the probability of collision with resident space objects and untrackable debris for the tether component of the Tethered Satellite System (TSS) after it broke away from the Space Shuttle orbiter (mission STS-75) in February 1996. Both an analytical and a numerical approach were used in this study, and the results obtained with these two methods were found to be in good agreement. These results show that the deployed tether is expected to have been impacted by several particles 0.1mm or larger in size. The probability of collision with objects 10cm in size or larger was on the order of 10^–3 per month. Since the severed tether reentered within one month after deployment, the collision hazard to other objects while in orbit was small. The analytical methods used in this study are useful for tether collision evaluations in general.     

空间碎片防护结构设计优化理论方法研究

航天器空间碎片防护结构设计优化在国际上属前沿课题，防护结构设计优化理论方法是其关键技术之一。在防护优化理论模型及其优化算法研究方面取得了突破性进展，建立了综合各类典型防护结构构型的统一的防护优化数学模型，提出了解决防护优化问题的几种算法：混合遗传算法，改进的差异演化算法和混合差异演化算法。最后采用航天器防护优化算例对防护优化理论方法进行了测试考核，优化结果表明了本文工作的可行性和有效性。