直升机计及诱速分布和挥扭耦合在侧风下的稳定性和操纵性

 旋翼诱速分布不均匀对无铰旋翼直升机的操稳特性是很得要的。文献[1]研究了计及挥扭耦合在涡流诱速场中的无铰直升机的稳定性分析,比较了诱速不均匀和挥扭耦合对稳定性的影响。本文除了应用文献[2]中的诱速不均匀分布以外,还计及了在侧风情况下的挥扭弹性变形耦合对稳定性和操纵性的影响。本文亦考虑了桨叶气动力中心、弹性轴位置和垂心沿展向的分布。     

航空铅酸蓄电池故障分析

介绍了航空铅酸蓄电池的几种常见故障,分析了其产生的原因,并提出了相应的排故或预防措施.从机务维护的角度提出了几点航空铅酸蓄电池的维护建议,对保证航空铅酸蓄电池正常工作具有重要意义.     

掺Ce^3＋的碱土氟化物的紫外发光特性研究

研究了掺杂稀土离子Ce^3＋的碱土氟化物发光体LiXAlF6：Ce^3＋（X=Ca^2＋,Sr^2＋或Ba^2＋）,XBaAlF6：Ce^3＋（X=Li6＋,Na^＋或K^＋）及LiBaXF6：Ce^3＋（X=Al^3＋,Ga^3＋或In^3＋）的紫外发光特性。实验发现,在LiXAlF6=Ce^3＋中,随着X元素原子序数的增大,Ce^3＋的发光峰就向短波方向移动。首次研究了在XBaAlF6：Ce^3＋与LiBaXF6：Ce^3＋中的X元素的一价与三价离子对Ce^3＋发光的影响,发现这些一价与三价离子的原子序数的变化并不影响Ce^3＋的发射光谱的峰值,它们只在晶格中起着填隙和电荷补偿作用,这有利于Ce^3＋的发光,使发光强度有所增强。这些紫外发光可用来增强X射线影像板中所包含的储存辐射的发光体BaFBr：Eu“的发光,使X射线影像板的显像增强。     

Satellite lithium-ion battery remaining useful life estimation with an iterative updated RVM fused with the KF algorithm

Lithium-ion batteries have become the third-generation space batteries and are widely utilized in a series of spacecraft. Remaining Useful Life (RUL) estimation is essential to a spacecraft as the battery is a critical part and determines the lifetime and reliability. The Relevance Vector Machine (RVM) is a data-driven algorithm used to estimate a battery’s RUL due to its sparse feature and uncertainty management capability. Especially, some of the regressive cases indicate that the RVM can obtain a better short-term prediction performance rather than long-term prediction. As a nonlinear kernel learning algorithm, the coefficient matrix and relevance vectors are fixed once the RVM training is conducted. Moreover, the RVM can be simply influenced by the noise with the training data. Thus, this work proposes an iterative updated approach to improve the long-term prediction performance for a battery’s RUL prediction. Firstly, when a new estimator is output by the RVM, the Kalman filter is applied to optimize this estimator with a physical degradation model. Then, this optimized estimator is added into the training set as an on-line sample, the RVM model is re-trained, and the coefficient matrix and relevance vectors can be dynamically adjusted to make next iterative prediction. Experimental results with a commercial battery test data set and a satellite battery data set both indicate that the proposed method can achieve a better performance for RUL estimation.     

Statistical analysis of the ionospheric ion density recorded by DEMETER in the epicenter areas of earthquakes as well as in their magnetically conjugate point areas

Results of a statistical variation of total ion density observed in the vicinity of epicenters as well as around magnetically conjugated points of earthquakes are presented in this paper. Two data sets are used: the ion density measured by DEMETER during about 6.5?years and the list of strong earthquakes (M_W?≥?4.8) occurring globally during this period (14,764 earthquakes in total). First of all, ionospheric perturbations with 23–120?s observation time corresponding to spatial scales of 160–840?km are automatically detected by a software (64,287 anomalies in total). Second, it is checked if a perturbation could be associated either with the epicenter of an earthquake or with its magnetically conjugated point (distance?<?1500?km and time?<?15?days before the earthquake). The index Kp?<?3 is also considered in order to reduce the effect of the geomagnetic activity on the ionosphere during this period. The results show that it is possible to detect variations of the ionospheric parameters above the epicenter areas as well as above their conjugated points. About one third of the earthquakes are detected with ionospheric influence on both sides of the Earth. There is a trend showing that the perturbation length increases as the magnitude of the detected EQs but it is more obvious for large magnitude. The probability that a perturbation appears is higher on the day of the earthquake and then gradually decreases when the time before the earthquake increases. The spatial distribution of perturbations shows that the probability of perturbations appearing southeast of the epicenter before an earthquake is a little bit higher and that there is an obvious trend because perturbations appear west of the conjugated point of an earthquake.     

基于改进相关向量机的锂电池寿命预测方法

锂电池具有轻便安全、循环寿命长和安全性能好等优点,作为一个被广泛应用的储能电源,锂电池健康管理和寿命预测是国内外研究的热点。建立锂电池寿命预测方法和模型,基于实验历史数据,建立电池衰减模型从而对整个电池的工作状态进行评估,及时对设备进行维护和替换,以确保电池工作的稳定。对相关向量机（RVM）的核函数进行了组合改进,优化了RVM的性能,减小了锂电池寿命预测的偏差度,提高了预测精度。      

LiNi0.8Co0.15Al0.05O2(NCA)正极材料的磷酸表面改性

针对新一代空间型号产品对储能电源提出的更高需求,提出采用表面改性的方法提升LiNi0.8Co0.15Al0.05O2（NCA）正极材料在锂离子电池中的循环稳定性。通过采用磷酸（H3PO4）对NCA正极材料进行表面处理,H3PO4会与NCA颗粒表面的含锂碱性物质发生反应,从而在NCA颗粒表面生成稳定且导电性良好的Li3PO4界面层。循环以及阻抗测试结果表明,经H3PO4表面处理的NCA材料组装电池循环50次后电池容量为170.5mA·h/g,容量保持率达到94%以上,界面阻抗得到抑制。H3PO4表面处理有效抑制了NCA颗粒表面碱性残留对电化学性能的不良影响,提升了界面稳定性,获得了更好的循环性能。     

离子推力器极少数据可靠性评估方法

针对只有两台离子推力器进行寿命试验,试验结果为极少失效数据的情况,建立了一种离子推力器整机可靠性评估方法.通过引入区间统计量的概念,充分开发从最后一个失效数据继续试验到没有发生产品失效这一重要试验信息,由高斯-马尔科夫定理计算出寿命分布参数的最佳线性无偏估计,并给出离子推力器可靠度和寿命的单侧置信下限.最后,对美国NASA研制的型号为XIPS-13的离子推力器进行可靠性评估,得出了其寿命需求10000h的可靠度单侧置信下限为0.87及给定可靠度为0.9时的寿命单侧置信下限为9024.6h,该方法精度较高,便于工程应用.      

SiC陶瓷与GH128镍基高温合金反应连接研究

采用 Fe-Ni(重量比为 65∶ 3 5)金属粉末焊料,利用 Gleeble1 50 0热模拟机对镍基高温合金 ( GH1 2 8)和 Si C陶瓷进行反应连接,研究了连接温度、连接压力和高温保温时间对试样连接强度的影响,确定了最佳工艺参数,并制备了剪切强度超过 3 4.3 MPa的陶瓷 /金属连接件。界面结构分析表明陶瓷 /焊料界面反应层的形成主要受 Fe,Ni原子向陶瓷中的扩散引起     

Data-driven reliability analysis of Boeing 787 Dreamliner

The Boeing 787 Dreamliner, launched in 2011, was presented as a game changer in air travel. With the aim of producing an efficient, mid-size, wide-body plane, Boeing initiated innovations in product and process design, supply chain operation, and risk management. Nevertheless,there were reliability issues from the start, and the plane was grounded by the U.S. Federal Aviation Administration(FAA) in 2013, due to safety problems associated with Li-ion battery fires. This paper chronicles events as...