液体推进燃料着火特性影响因子与活化能分析

采用反射激波管实验台,对液体推进燃料RP-3着火特性进行了实验研究,并分析了燃料的表观活化能。采用了最大OH-光谱斜率倒推法确定着火终点,判定得到了液体推进燃料的着火特性,并对不同燃料体积分数下的着火延迟进行了归一化处理。结果表明:推进燃料的表观活化能差异不大,约为154～171kJ/mol;对各参数影响因子进行分析,着火延迟时间与当量比成正比关系,与燃料体积分数和混合气压力成反比关系;与JP-10比较发现,着火特性数据受燃料体积分数、当量比的影响因子几乎相等。      

径向磁气组合轴承系统的动态性能

为探究磁轴承失效时能否减轻转子跌落带来的损害,将人字槽径向动压气体轴承引入磁轴承转子系统,研究磁气组合轴承对系统动态性能的影响和动压气体轴承的支承特性。采用有限差分法和小扰动法求解气膜厚度方程和雷诺方程,研究动压气体轴承的静动态特性。对磁轴承电磁力进行了分析,采用磁轴承不完全微分PID（比例-积分-微分）控制策略,对系统进行了理论模态分析和试验模态分析,完成了系统高速旋转试验,测试了动压气体轴承在不同偏心率和转速下的承载力。结果表明,引入动压气体轴承可提高系统的动态性能,在磁轴承失效造成高速转子跌落瞬间,偏心率趋近于1,两个径向动压气体轴承能够产生较大承载力,减轻转子跌落造成的损害。      

基于ARCN模型的轴承故障诊断

提出注意力循环机制与胶囊网络融合的注意力循环胶囊网络（ARCN）的诊断模型。提取时序特征信息构建初级胶囊;自适应融合路由机制、注意力循环机制构建数字胶囊特征;基于西储大学轴承实验数据,验证了ARCN模型的准确率、鲁棒性、稳定性、收敛误差,其准确率相比Caps模型识别准确率提高1.2%、收敛误差达到0.2。基于实验仿真平台,采集正常、内环故障、外环故障和滚动体故障的振动信号,并通过小波基变换获取的时频图构建ARCN模型的数据集。仿真实验结果表明:ARCN模型下,每类故障被误诊的概率不超过总样本的1%。      

磁轴承PWM开关功放电流实时降噪

针对传统低通滤波器在脉冲宽度调制(PWM, Pulse Width Modulation)开关功放电流降噪过程中存在去噪效果与系统带宽难以兼顾的问题,提出了一种基于提升小波变换的功放电流实时降噪法.首先基于dB4提升小波算法,采用滑动数据窗、对称边界拓展和阈值法强制降噪等相结合的方案实现对功放电流的实时降噪.然后根据不同小波分解层数对系统截止频率的影响,确定合适的小波分解层数.实验证明,提升小波实时降噪算法既可以有效地滤除功放电流噪声,又对系统带宽和相角滞后影响较小,非常适用于对实时性和信噪比都有较高要求的磁悬浮高速转子系统.      

Impact of bending dies with different friction forms on forming force and quality of tubes manufactured by free bending technology

In the 3D free bending forming system, the bending die can be designed either in a sliding type or rolling friction type. Bending die-based sliding friction type is often called normal bending dies; however, the bending dies-based rolling friction type includes bending die-based roller type and ball type in structure. In the current study, the impact of three bending dies on the forming force, and the bent tube quality was investigated. The obtained results showed that the tangential stresses and strains of the tubes formed by the bending die-based roller type were the smallest among the three bending dies. Besides, the spherical bearing force P_U was reduced drastically after using the roller type and ball type compared to the sliding friction type. Moreover, the uniformity of the wall thickness distribution of the tubes formed by the roller type and ball type was better than those obtained from the sliding friction type. In addition, the cross-section distortion rate was reduced by 2.8% using the roller type, and 1.8% using ball-type compared to the sliding friction type.     

控制力矩陀螺磁悬浮转子的指数趋近积分滑模控制研究

针对微重力、动框架等多源扰动下磁悬浮控制力矩陀螺磁轴承转子系统的强非线性、参数摄动及未建模动态等问题,开展控制力矩陀螺的磁轴承转子鲁棒控制研究。建立了磁轴承转子轴向通道动力学模型与电磁力工作点线性化模型,分析了系统参数摄动及未建模动态,并在此基础上提出了一种非线性系统指数趋近积分滑模控制方法,设计了含有电流及位移的积分滑模平面,采用指数趋近律与饱和函数抑制抖振实现到达阶段滑模控制律。实验结果表明：采用该方法可有效抑制滑模的抖振现象,参数摄动时系统具有较佳动态性能,同时在转子转动、框架工作时保证系统良好鲁棒性。     

磁悬浮飞轮用新型异极性永磁偏置径向磁轴承

为满足应用于航天器姿控、储能的磁悬浮飞轮采用的扁平构型或高转速转子需求,提出了一种新型异极性永磁偏置径向磁轴承,具有轴向长度短、结构紧凑的优点,有利于扁平转子或高速转子的磁悬浮控制。在新型径向磁轴承磁路分析的基础上,通过应用于50 Nms反作用飞轮的设计实例,经仿真分析,校验了新型径向磁轴承的基本性能;并与传统同极性永磁偏置径向磁轴承进行了比较,验证了新型径向磁轴承的优点。     

液体推进剂热稳定性研究方法探讨

为研究液体推进剂的热分解特性,利用差示扫描量热仪（DSC）和绝热加速量热仪（ARC）,对自行研制的3种液体推进剂进行了热分解过程研究,并对其热稳定性进行了探讨.分析了DSC和ARC两种方法在研究液体推进剂热分解方面的优劣性.     

磁悬浮飞轮微振动特性及其主动振动控制方法研究

为了进一步减小磁悬浮飞轮的振动力和力矩,建立并分析了一种特殊结构的磁悬浮飞轮的微振动模型,并利用微振动测量平台、数据采集分析硬件和软件,通过试验测量了磁悬浮飞轮6个自由度的振动力和力矩.分析其时域特性和频域特性,其振动特性图(瀑布图)显示了径向两个平动方向X和Y的振动力主要是同频分量、倍频分量以及模态量,其中同频分量较为明显.利用开闭环自适应陷波,分别对X、Y两个方向的振动力进行主动振动控制,取得了较好的控制效果,使得两个方向的振动力的同频量显著下降.     

Self-perspiration garment for extravehicular activity improves skin cooling effects without raising humidity

Introduction

The current U.S. extravehicular activity (EVA) suit in space includes liquid cooling and ventilation garment (LCVG) to control thermal condition. Tubes knitted in LCVG for flowing water interrupt evaporation of perspiration, and astronauts feel discomfort. In the present study, we hypothesized that a self-perspiration garment would effectively lower the skin temperature without raising humidity in the garment. Thus, we developed and examined the effects of the garment.

Methods

Eight healthy subjects were studied with a cyclic ergometer of 30, 60 90 and 120 W loading for 3 min each. Skin temperature and humidity on the back were measured continuously. Subjects wore and tested three types of garments i.e., a spandex wear without any cooling device (Normal), a simulated LCVG (s-LCVG) or the spandex wear knitted a vinyl tube for flowing water, and the spandex wear with a tube, which flows water and self-perspiration with oozing water for evaporative cooling (SPEC).

Results

All measurements were reached to steady state 2–3 min after the setting. The s-LCVG decreased skin temperature 0.39±0.14 °C during 12 min of cooling. With SPEC, skin temperature did not decrease significantly until 6–9 min after starting the cooling. However, the temperature decreased rapidly and significantly after that, and finally decreased 1.59±0.32 °C. Humidity in the SPEC was significantly lower than that in s-LCVG.

Discussion

SPEC was effective for lowering skin temperature without raising humidity in the garment. The concept is expected to use as a better cooling system during EVA.