液体推进剂空间发动机系统对质心漂移的影响

研究了挤压式液体推进剂空间发动机系统布局对空间飞行器质心漂移的影响，提出了质心漂移的计算模型，得到了对发动机系统布局有指导作用的结论。     

卫星优化热设计方法

试图把最优化技术应用于卫星工程的热设计中,提出一种优化热设计的方法,并以14个节点模型作为实例进行了计算分析,采用Hooke-Jeeves 的直接搜索法得到了满意的结果。初步编制的计算机程序,可作为卫星热设计方案计算的基础。     

疲劳裂纹扩展随机过程相关参数的估计

对数正态随机过程模型是可靠性与损伤容限分析中常用的裂纹扩展随机模型.在裂纹扩展对数正态随机过程模型的基础上,建立了由试验数据估计一般平稳正态随机过程相关参数的方法.应用这种方法可以直接由试验数据估计随机过程的相关参数.同时,给出了用Monte-Carlo方法估算置信区间的方法.最后,给出了用具体试验数据,这组试验数据共有237个数据点,估计随机过程相关参数的算例.     

一个基于故障树模型的诊断系统

提出一种基于故障树模型的诊断方法，并基于该方法实现了一个验证性的诊断系统。基于故障树的层次诊断模型，提出了确定性推理方法和可能性推理方法及面向故障树的基于框架和广义规则的混合知识表示方法。最后在ＣＯＭ－ＰＡＱ４８６微机上，Ｗｉｎｄｏｗｓ环境下，用ｂｏｒｌａｎｄＣ＋＋实现了该诊断系统，并通过对一个电路系统实验台的诊断验证了方法的有效性。     

微波泄漏对光抽运铯束频标准确度影响的分析

微波泄漏是影响光抽运铯原子钟准确度的主要因素之一. 傅里叶变换分析法是分析其影响的主要手段,但该方法只能用来分析有效原子速度分布很窄的情况.通过分析和计算,推导出频移随漏场的位置、相位和幅度变化的关系式.计算和分析的结果表明,漏场引起频移大小和漂移区的长度、输入微波功率值和漏场的相位、强度和位置等有关.所得的结果和用傅里叶变换方法分析所得的结果是一致的,分析的方法不受原子有效速度限制.     

飞机V型外倾双垂尾载荷校准技术

根据垂尾载荷校准及建模需求,对飞机V型外倾双垂尾结构受载情况进行了分析和简化,确定了校准试验载荷,研制了垂尾载荷校准试验专用龙门梁架。采用液压协调加载技术,完成了外倾双垂尾载荷校准试验,建立了满足测载要求的载荷模型。此种方法充分利用了左右垂尾外倾、双垂尾之间空间较大的特点,对左右垂尾对称施加向外的单点、多点载荷,加载载荷侧向分量左右自平衡,垂向分量依靠飞机自身重量即可平衡,飞机不需要复杂的固定与约束。试验中采用先搭建龙门框架,再停放飞机的方法,降低了试验风险、加快了试验进度,取得了良好的试验结果,对其他此类结构的载荷校准具有一定的借鉴作用。     

一种TASIMM-UKF导弹状态估计方法

为了提高对机动导弹状态估计的精度和速度,提出了一种三轴分离IMM-UKF(TASIMM-UKF)滤波算法。将导弹运动状态按坐标轴方向进行三轴分离,并基于CV,CA和CJ模型集,采用无迹卡尔曼滤波器并行估计导弹三轴状态信息,有效地解决了导弹不同运动轴间的模型竞争问题。仿真结果表明,该方法能有效提高状态估计精度,缩短了估计时间,对复杂大机动目标状态估计具有良好的性能。     

Numerical simulations of water spray on flame deflector during the four-engine rocket launching

This paper aims to study on the cooling effect with two types of water spray nozzle on the flame deflector during the four-engine launch vehicle take-off. To accurately simulate the two-phase flow of the rocket gas with multispecies and the water spray, the three-dimensional compressible Navier-Stokes equations, discrete ordinates methods and realizable k-Ɛ turbulence model are used to establish the rocket supersonic plumes impact model. The Eulerian dispersed phase (EDP) model was used to simulate the water spray into the exhaust gas. The accuracy and effectiveness of the gas-liquid flow model are verified by a good agreement between simulation results and experimental data. On this basis, a series of numerical simulation studies under different water injection position are performed. The results show that the high temperature regions, along the axis of engines on the deflector plate, have no significant temperature decreasing effect by water spray from the nozzles mounted on the apex of the deflector, and the high temperature converts a large quantity of water into vapor near the plume boundary, which would decrease the flow conductivity. With the cooling spray nozzle fixed directly to the deflector plate, the temperature decrease effect is obvious and the effect of thermal shock on deflector plate induced by exhaust plume is reduced, so that it can prevent the flame deflector from thermal ablation. The study results provide indepth information and engineering guidance for designing the water spray systems and increasing the safety of the launch process.     

数值模拟方法对NASA CRM模型阻力预测的影响

在复杂工程外形的数值模拟中，网格类型、规模和分布、湍流模型、数值格式等都会不同程度影响模拟结果。如何评估这些模拟方法对模拟结果的影响，并识别对模拟结果影响较显著的因素，对于CFD的发展方向有积极的借鉴指导意义。为了综合研究不同因素对商用运输机外形阻力预测的影响，以AIAA第六届阻力预测会议外形NASA CRM为研究对象，同时考虑了网格、湍流模型、无黏通量格式和体心梯度求解方法等因素对阻力预测的影响。分析中采用枚举法和正交试验设计两种方法，并使用了基于聚类分析的定性敏感性分析方法和基于Mckay主影响分析的定量方法，识别出对阻力预测影响较大的因素，这为数值模拟方法的发展指明了方向。     

A novel surrogate modeling strategy of the mechanical properties of 3D braided composites

In this paper, a surrogate-based modeling methodology is developed and presented to predict the elastic properties of three dimensional (3D) four-directional braided composites. Using this approach, the prediction process becomes feasible with only a limited number of training points. The surrogate models constructed using Finite Element (FE) method and Diffuse Approximation, reduce the computational time and cost for preparing experimental samples. In the FE model, multiscale method is applied to couple the computations of elastic properties at microscale and mesoscale. Subsequently, a parametric study is performed to analyze the effects of the three design parameters on the elastic properties. Satisfactory results are obtained via the surrogate-based modeling predictions, which are compared with the experimental measurements. Moreover, the predictions obtained from surrogate models concur well with the FE predictions. This study orients a new direction for predicting the mechanical properties based on surrogate models which can effectively reduce the sample preparation cost and computational efforts.