Retrieval of vegetation equivalent water thickness from reflectance using genetic algorithm (GA)-partial least squares (PLS) regression

This study aimed to investigate the performance of genetic algorithms coupled with partial least squares (GA-PLS) modeling of spectral reflectance in retrieving equivalent water thickness (EWT) at leaf and canopy level. A genetic algorithm was used to identify a subset of spectral bands sensitive to the variation in EWT, and PLS was then applied to relate the identified bands to EWT values. GA-PLS was applied to leaf level reflectance available from LOPEX dataset, and canopy data includes reflectance simulated by a leaf radiative transfer model PROSPECT and a canopy radiative transfer model SAILH and acquired by airborne visible/infrared imaging spectrometer (AVIRIS). The results indicate that GA-PLS has the capability of retrieving EWT from leaf and canopy reflectance, and achieved good estimation accuracy, i.e. low root mean square errors (RMSE) and high squared correlation coefficients (R²). For the retrieval at leaf level, the estimation accuracy can be as good as RMSE = 0.0019 g/cm² and R² = 0.939 or better. For the retrieval at canopy level, the model accuracy is RMSE = 0.0061 g/cm² and R² = 0.966 or better when PROSPECT-SAILH simulated reflectance was used; when AVIRIS image spectra were used, the model accuracy is RMSE = 0.0094 g/cm² and R² = 0.8734 for the calibration, and RMSE = 0.0132 g/cm² and R² = 0.7756 for the validation. These results from GA-PLS modeling support the conclusion that GA-PLS has the potential to be applied to AVIRIS, Hyperion and HyMap imagery for retrieving EWT. The selected bands for the AVIRIS datasets differ from those for the LOPEX and PROSPECT-SAILH simulated datasets, and this inconsistence of the selected bands for different datasets indicates that the GA-PLS method has the advantage of tuning the optimum bands for PLS regression and accommodating the effects of confounding factors.     

非稳定动态过程非定常气动力建模

现有的大迎角非定常气动力建模方法，通常是以一个或多个频率的稳定振动试验数据来预测稳定滞环。然而，飞机快速机动如过失速机动的过程，不可能是持续的稳定振动，而是一个非稳定的动态过程。因此，这个过程中的气动力不会达到稳定滞环，而是始终处于进入滞环的初始非稳定过程中。基于振动理论分析得出，非定常气动力的动态响应过程存在非稳定和稳定两个阶段，传统建模方法着眼于稳定阶段，而飞机的真实机动过程在非稳定阶段。设计了一种适于非线性系统辨识的激励输入，并以最小二乘支持向量机（LS-SVM）方法为例，实现了在大迎角区幅值和频率范围内任意运动的非定常气动力建模。模型训练完成后，用来预测某机翼在不同基准状态下大迎角范围内做俯仰运动时的升力系数、阻力系数和俯仰力矩系数。结果表明，不仅稳定滞环实现了准确预测，进入滞环的初始非稳定过程也得到了准确预测；此外，基准状态对气动力在初始非稳定过程中的特性存在明显影响。进一步的验证还表明，基于稳定滞环数据只能预测到稳定滞环，无法预测进入滞环的非稳定过程。     

Quantifying lunar soil composition with partial least squares modeling of reflectance

Retrieval of lunar soil composition is commonly achieved through optical remote sensing in which spectral characteristics of returned lunar samples are related to their constituents. Partial least squares (PLS) and principal component regression (PCR) were applied to the dataset characterized by the Lunar Soil Characterization Consortium (LSCC) to estimate the content of FeO, Al₂O₃ and TiO₂ in the soils. The goal of this study was to test whether the conversion of reflectance to single scattering albedo (SSA) via Hapke’s radiative transfer model is able to improve the performance of PLS and PCR. Results from PLS and PCR modeling of SSA spectra indicate that the conversion does not necessarily improve the performance of PLS and PCR, and this depends on the chemical considered, the way to select the number of optimal factors, and how the data were pretreated. The conversion failed to accommodate the large deviation of highland samples with low FeO, TiO₂ and high Al₂O₃.     

固体火箭发动机水下应用时的燃速特性分析

火箭发动机内真实的推进剂燃速往往由于高温高压难以测量。为探讨燃速对于工况的依赖性．对水下应用的固体火箭发动机试验器的试验结果用最小二乘法进行了辨识。引用三种燃速公式进行辨识,得到了一种新型推进剂稳态燃速模型参数的最优辨识值。结果表明：指数式的辨识结果得到的残差最小,指数式是描述该新型推进剂燃速规律的合理格式。     

MC-CDMA中的RLS-DRMTA算法

多载波码分多址(MC-CDMA)系统是将OFDM技术与CDMA技术结合起来的一种综合技术.MC-CDMA系统中同信道干扰仍然是影响系统性能的主要因素,这就需要使用智能天线来提高系统的性能.介绍一种适用于MC-CDMA系统的自适应阵的盲算法递推最小二乘解扩重扩多目标阵列(RLS-DRMTA)算法,利用扩频码的信息进行波束形成,不需要训练序列,节约了频谱资源;与LS-DRMTA算法相比,RLS-DRMTA算法节省了运算时间;另外仿真表明在正交频分复用(OFDM)解调后进行波束形成,提高了系统的性能;为了降低系统的复杂度,还用到了载波分组技术,但分组技术又会降低系统的性能,所以分组时考虑了系统性能和运算速度的折衷.仿真结果表明RLS-DRMTA算法能使方向图的主波束对准信号方向,而在干扰方向形成零陷,从而达到抑制干扰的目的.      

递推阻尼最小二乘法及其在火控系统中的应用

由于火控系统误差模型未知且稳定性较差,采用Kalman滤波实现滤波时,其滤波特性较差;而此时最小二乘法是实际工程应用中的常用方法,但是容易产生参数爆发现象。文中提出了一种基于多输入-多输出(MI-MO)系统的递推阻尼最小二乘法,将其应用到火控滤波系统中。仿真结果表明,利用递推阻尼最小二乘法能达到递推最小二乘法同样的精度,且能明显抑制参数爆发现象,达到良好的滤波效果。     

用近红外光谱在线监测炭布/酚醛预浸料的质量指标

用近红外漫反射法对炭布/酚醛预浸料的树脂含量、可溶树脂含量和挥发分含量进行在线监测,通过偏最小二乘法分别建立标准模型,并选择了光谱预处理方法和PLS的因子数。用近红外方法和标准方法对未知样品进行分析,通过t检验结果显示2种方法没有显著差别,利用近红外方法可同时预测3项指标,1 m in内就可分析1个样品,在生产过程中可利用近红外分析的结果调解工艺参数。研究表明,近红外分析是控制炭布/酚醛预浸料质量的有效和准确的方法。     

基于移动最小二乘法的机载SAR成像运动误差补偿方法

机载SAR平台在飞行过程中产生的运动误差会导致成像质量下降,利用测量数据提取运动误差是机载SAR运动补偿的重要手段之一。通过对机载SAR运动误差理论的推导,提出一种基于移动最小二乘法的机载SAR成像运动补偿方法,方法借助于惯性导航系统记录的东北天三维速度信息,对其进行处理,进而获得雷达平台的三维空间信息,再与后向投影算法结合,完成SAR成像运动补偿。方法是对最小二乘法进行改进,使其不需要对数据进行分段估计和平滑,还可以保证估计结果的正确性。实验结果验证方法对运动误差估计的准确性和有效性。     

IDENTIFICATION OF GYRO DRIFTS UNDER THREE AXIS ATTITUDE COUPLING

ＩＤＥＮＴＩＦＩＣＡＴＩＯＮＯＦＧＹＲＯＤＲＩＦＴＳＵＮＤＥＲＴＨＲＥＥＡＸＩＳＡＴＴＩＴＵＤＥＣＯＵＰＬＩＮＧＪＩＮＧＷｕｘｉｎｇ（荆武兴），ＷＡＮＧＸｕｅｘｉａｏ（王学孝），ＷＵＹａｏｈｕａ（吴瑶华）（ＨａｒｂｉｎＩｎｓｔｉｔｕｔｅｏｆＴｅｃｈｎ...     

一种遥测缓变参数自动判读的新方法

针对遥测参数中缓变参数的自动判读问题，提出一种基于历史数据统计特性的遥测缓变参数自动判读新方法。首先，设计了一种以参数目标数据时标为基准的时间间隔递推算法和线性插值方法，使历史数据与目标数据的时标得到有效统一。其次，基于方向和距离函数构造了双因子等价权函数，并利用抗差最小二乘估计算法得到了参数的估值和标准差。最后，根据参数的估值和标准差对目标数据进行统计分析，依据目标数据的概率分布判断参数是否存在异常，进而实现参数的自动判读。仿真校验结果表明，该方法能有效辨识缓变参数中的异常参数，且具有较强的抑制随机噪声和抗差自适应能力。与传统以人工为主的判读方式相比，该方法能有效提高遥测参数判读的效率和准确性。