Experimental and numerical investigation on opposing plasma synthetic jet for drag reduction

Experimental and numerical studies are carried out to validate the potential of opposing Plasma Synthetic Jet (PSJ) for drag reduction for a hemisphere. Firstly, flow field changes of opposing PSJ are analyzed by comparing the experimental schlieren images and simulation results in a supersonic free stream of Mach number 3. As PSJ is a kind of unsteady pulsed jet, the shock standoff distance increases initially and then decreases under the control of PSJ, which corresponds to the change of the strength of PSJ. Accordingly, the amount of drag reduction of the hemisphere increases initially and then decreases. It is found that there is a short period of “drag rise” during the formation of PSJ before the drag reduction, which is induced by the generation of normal shock waves and the area difference of the cavity wall of PSJ Actuator (PSJA). Secondly, the effects of five parameters, including exit diameter, discharge energy of PSJA, Mach number, static pressure of incoming flow and angle of attack, on drag reduction of opposing PSJ were studied in detail by using numerical method. It is found that the Maximum Pressure Ratio (MPR) has a significant impact on the average drag reduction for a configuration-determined PSJA. For the configuration selected in this study, the flow field of opposing PSJ shows typical Short Penetration Mode (SPM) in a control cycle of PSJ when the MPR is less than 0.89. However, the flow field shows typical Long Penetration Mode (LPM) at some time when the MPR is bigger than 0.89. Relatively better drag reduction is achieved in this case.     

Pressure performance for a thin-walled ring and turbulent-jet orifice modeled elastic squeeze film damper

This paper explores an analytical model for Elastic Ring Squeeze Film Damper (ERSFD) with thin-walled ring and turbulent-jet orifices, and uncovers its Oil Film Pressure Performance (OFPP). Firstly, the ring deformation is addressed by using the Fourier series expansion approach and the orifice outflow rate is characterized with the Prandtl boundary layer theory. Secondly, applying finite difference scheme, the influence of elastic ring flexibility, orifice diameter, and attitude angle on the OFPP is analyzed. Finally, Outer chamber pressure was measured experimentally at different rotor speeds. The results indicate that the outer chamber pressure coats an individual load-carrying region and spreads symmetrically pertaining to the attitude angle. Its amplitude drops as the elastic ring flexibility decreases but boosts with the reduction of the orifice diameter. For inner chamber pressure, the orifice diameter effects a similar trend to the outer cavity, but exhibits more stable distribution regarding the attitude angle. Minimizing the elastic ring flexibility causes an increase in amplitude. The model is validated by the test results giving that the outer chamber pressure shifts synchronously and periodically with the variation of the attitude angle, while the pressure amplitude increases slightly at higher rotor speeds.     

螺旋桨/机翼耦合下的目标螺旋桨滑流设计

针对分布式电推进(DEP)构型等具有多螺旋桨特征的飞行器,发展了通过优化螺旋桨滑流来达到提高机翼升阻比的方法.提出了一种可以获得目标诱导速度分布的螺旋桨设计方法,基于面元法发展了一套可以快速计算螺旋桨机翼干扰的气动程序Prop-wing,基于Kriging代理模型建立了一套高效的优化方法获得最优的螺旋桨诱导速度分布提高...