Hemisphere-coupled modeling of nighttime medium-scale traveling ionospheric disturbances

Nighttime medium-scale traveling ionospheric disturbances (MSTIDs), which have tilted frontal structures in the midlatitude ionosphere, are investigated by the midlatitude ionosphere electrodynamics coupling (MIECO) model in this study. It has been proposed that the electrodynamic coupling between the E and F regions plays an important role in generating MSTIDs within a few hours. An intriguing aspect of MSTIDs is that they were simultaneously observed at magnetic conjugate locations in the Northern and Southern Hemispheres. In order to study the hemisphere-coupled electrodynamics, the MIECO model has been upgraded to consist of two simulation domains for both hemispheres in which the electrostatic potential is solved by considering electrodynamics in both hemispheres. The simultaneous occurrence of MSTIDs at the magnetic conjugate stations has clearly been reproduced when the F-region neutral wind satisfies the unstable condition in both hemispheres and a sporadic-E layer is given only at the Northern (summer) Hemisphere. Even if the unstable condition is satisfied in the summer hemisphere, an unfavorable F-region neutral wind in the winter hemisphere largely suppresses the growth of MSTIDs in both hemispheres.     

Interaction mechanisms of shock waves with the boundary layer and wakes in a highly-loaded NGV using hybrid RANS/LES

Accurate predictions of Shock Waves and Boundary Layer Interaction (SWBLI) and strong Shock Waves and Wake Vortices Interaction (SWWVI) in a highly-loaded turbine propose challenges to the currently widely used Reynolds-Averaged Navier-Stokes (RANS) model. In this work, the SWBLI and the SWWVI in a highly-loaded Nozzle Guide Vane (NGV) are studied using a hybrid RANS/LES strategy. The Turbulence Kinetic Energy (TKE) budget and the Proper Orthogonal Decomposition (POD) method are used to analyze flow mechanisms. Results show that this hybrid RANS/LES method can obtain detailed flow structures for flow mechanisms analysis. Strong shock waves induce boundary layer separation, while the presence of a separation bubble can in turn lead to a Mach reflection phenomenon. The shock waves cause trailing-edge vortices to break clearly, and the wakes, in turn, can change the shocks intensity and direction. Furthermore, the Entropy Generation Rate (EGR) is used to analyze the irreversible loss. It turns out that the SWWVI can reduce the flow field loss. There are several weak shock waves in the NGV flow field, which can increase the irreversible loss. This work offers flow mechanisms analysis and presents the EGR distribution in SWBLI and SWWVI areas in a transonic turbine blade.     

Internet2—未来的Internet

介绍了Internet2的发展、基本结构和网络互连等问题，描述了与Internet2紧密相关的gigaPoP的组成，说明了必须考虑的参数和约束条件，阐明了所要采用的路由和服务质量协议。     

运输类飞机高升力构型数值模拟研究

高升力装置对大多数运输机的大小、吨位、经济性及安全性都有重要的影响。由于复杂的流动机理、几何外形、支撑机构及驱动系统之间的矛盾关系,导致高升力系统的设计周期很长并且很大程度上依赖于试验[1]。然而,随着计算机软件和硬件的迅速发展,近几年的工程设计中N-S方程应用日趋广泛。在空气动力学设计领域,计算机辅助设计手段已经逐步替代了过去的经验设计手段,并且国内飞机设计单位的科研人员也开始花费越来越多的时间应用流体仿真软件来达到设计目标,而不是像过去那样完全依赖试验结果去设计和分析飞机气动力特性,高升力装置设计也是如此。本文着重对著名的MSES软件和CFX软件在高升力装置模拟中的工程应用进行探索,并和风洞试验结果进行比较,初步研究了高升力装置数值模拟在飞机设计工程应用中存在的一些问题。     

用湍流附面层方程计算喷管内的对流换热

在流场计算的基础上,运用Patankar-Spalding方法积分求解了湍流附面层控制方程组,从而得到了固体火箭发动机喷管内燃气与壁面之间的对流换热。其中在附面层靠近壁面的底层区使用了Gouette流分析,在壁面边界和自由流边界处引入了滑移值的概念,因此保证了计算结果的相对准确性。最后将本文的计算结果与巴兹公式的计算结果和实验结果进行了比较。     

压缩拐角区的压力,热流工程计算方法

 <正> 引言 从压缩拐角分离流动的试验及数值计算出发,建立起一个实用范围较广精度较高的工程估算程序,方便快速地估算出压缩拐角分离区和再附区的峰值压力、峰值热流;分离区和再附点位置;分离区长度等。这是气动设计部门关注的课题。这些工作是在文献(3,4)中的经验公式的基础上,按照分离流动流谱,分区进行迭代修正计算,对二维情况给出了完整     

应用LDV研究二元管道内分离流动

应用二维激光多普勒仪测量了二元曲壁非对称扩张通道内的湍流附面层分离流动。得到了时均速度、雷诺应力、平均流动方向角及正反向间歇流动因子的分布。文中给出了所测结果的不确定度,并在激光测速的近壁测量上做了尝试。实验结果分析表明:间歇瞬时分离点对应于附面层内垂直压强梯度的最大值;Schofield的速度尺度和长度尺度可用于形成新的速度相似型;正反向间歇流动因子γpuo与平均流动方向角存在着简单的线性关系。     

MEMS惯性器件低应力封装过渡层研究

封装应力是影响MEMS惯性器件输出性能的主要因素之一，封装应力是由于封装过程中封装对象间材料热特性不匹配所引起的。封装应力除了受封装对象本身的材料性能影响外，还与芯片及基底间的过渡层形式有关。不同的过渡层形式不仅会影响封装应力的峰值，还会对应力的分布情况产生影响。为了研究不同形式的过渡层对三层结构MEMS惯性器件芯片封装应力的影响，首先利用COMSOL有限元仿真分析软件简要地分析了不同材料参数对封装应力的影响，并进一步研究了常见封装形式以及不同封装结构的应力分布规律。结果表明，不同的粘接材料、封装形式和封装结构都会引起封装应力的变化。     

二维平行剪切层声波产生和辐射的数值模拟

 在二维线化Euler 方程的基础上解决了第3 届计算气动声学专题讨论会的第5 类标准问题: 二维平行剪切层声波的产生和辐射。频散相关保持有限差分格式用于空间离散, 低频散低耗散的龙格库塔法用于时间积分。重点使用了远场无反射边界条件。计算结果与NASA GLENN 研究中心的解析解符合得很好。     

马赫数对后掠激波和湍流边界层干扰特性的影响

本文介绍了尖前缘翼诱导激波和湍流边界层干扰流场壁面特性，着重强调马赫数影响。给出２．０≤Ｍ≤８．２、ａ≤３５°分离流场中，锥型干扰区内主分离线和再附线位置与无粘激波角β０和迎角ａ的相关式，证实无粘条件是控制锥型区尺度的主要因素，面高超声速与超声速干扰流中二次分离随激波强度的不同发展，表明干扰流场的细致结构与可压缩性有关。