伞舱系统在火星环境中的运动特性分析

建立了火星大气环境模型和伞舱系统多体动力学模型,通过仿真分析了火星环境下伞舱系统中进入舱的运动特性,并对其在火星环境和地球环境的运动稳定性进行仿真比较分析,得出的相关结论可为探测器火星登陆技术提供参考。     

航天器舱内中子辐射探测技术

航天器舱内中子对于舱内电子设备和人员安全都存在潜在的巨大威胁,中子探测对于改进航天器防护层的设计,保护设备与人员安全都具有重要的意义。然而舱内中子辐射环境复杂,中子探测会受到带电粒子的干扰。文章主要调研了国外中子辐射环境及其效应探测载荷技术的发展现状,并对国外典型的中子辐射环境探测器的技术特点进行了总结。结合国外中子探测技术发展动态和我国的技术状况,对我国进一步发展载人航天器舱内中子辐射环境探测技术提出了建议。     

稳态加速度模拟试验设备：离心机设计（3）

文章分3篇10章详细介绍了稳态加速度模拟试验设备--离心机的设计.上篇对稳态加速度环境及其效应、相关试验方法和国家标准作了阐述;中篇(上)系统介绍了国内外离心机发展的历史,提供了较为全面具体的离心机结构概况,并对它们逐一进行小结与点评;中篇(下)对离心机进行基本理论分析,研究总体设计和部件设计问题,提出离心机设计原则及其计算方法;下篇通过一个国家"七五"科技攻关项目的实践作为实例,提供读者作设计参考.在文章中,作者对多年来积累的技术资料和实践心得进行了系统的整理和归纳,梳理出一条在离心机研制中科学的设计思路和实用的工作程序.该文章对相关领域的研究人员和技术人员会有启发和帮助,同时对其他同类设备的设计也有触类旁通的作用.文章主要探讨的对象是中型,大型、特大型航空航天物体离心机,土工离心机和载人离心机.     

空间太阳望远镜热光学环境试验技术

空间太阳望远镜在轨期间,空间环境温度变化会严重影响望远镜成像质量,降低分辨率,因此空间太阳望远镜在模拟空间环境下的热光学试验是其研制过程中的关键技术之一。文章介绍了国外部分空间望远镜的热光学试验及低温光学试验设备,并针对国内空间太阳望远镜的研制和试验研究,提出了一些建设性的意见。     

微波无源遥感有效载荷现状与发展

针对微波无源遥感有效载荷这一卫星有效载荷中发展最早、最成熟的子领域,对从20世纪60年代至今,世界范围内在轨与在研共17个具有代表性的载荷产品进行了研究。综合分析了微波无源遥感载荷在气象、海洋、陆地、大气环境及深空微波遥感等应用领域的发展现状,归纳出无源微波遥感有效载荷向定量应用、功能复合、主被动一体、体制混合、太赫兹探测等方向的发展趋势。总结了我国与欧美发达国家在系统应用水平、反演处理能力、关键部组件性能、研发条件等方面存在的差距,提出了后续发展静止轨道毫米波亚毫米波探测仪、一体化微波成像探测仪、太赫兹冰云探测仪、L波段土壤湿度微波探测仪、亚毫米波临边探测仪、行星探测仪等载荷的设想。     

Crop selection for advanced life support systems in the ESA MELiSSA program: Durum wheat (Triticum turgidum var durum)

As part of an ESA MELiSSA investigation into advanced life support (ALS) candidate crop cultivar selection and growth requirements, the University of Guelph’s Controlled Environment Systems Research Facility (CESRF) conducted a case study on growth and development of four durum wheat cultivars (Triticum turgidum var durum) grown hydroponically under controlled conditions in a sealed environment. Cultivars tested were Canadian developed Avonlea, Commander, Eurostar and Strongfield. There were few fundamental differences in durum quality parameters between hydroponically and field grown wheat, however yields of Eurostar and Strongfield exceeded those of field trials by 41% and 87% respectively.     

Galactic outflows and the pollution of the galactic environment by supernovae

We here explore the effects of the SN explosions into the halo of star-forming galaxies like the Milky Way. Successive randomly distributed and clustered SNe explosions cause the formation of hot superbubbles that drive either fountains or galactic winds above the galactic disk, depending on the amount and concentration of energy that is injected by the SNe. In a galactic fountain, the ejected gas is re-captured by the gravitational potential and falls back onto the disk. From 3D non-equilibrium radiative cooling hydrodynamical simulations of these fountains, we find that they may reach altitudes up to about 5 kpc in the halo and thus allow for the formation of the so called intermediate-velocity-clouds (IVCs) which are often observed in the halos of disk galaxies. The high-velocity-clouds that are also observed but at higher altitudes (of up to 12 kpc) require another mechanism to explain their production. We argue that they could be formed either by the capture of gas from the intergalactic medium and/or by the action of magnetic fields that are carried to the halo with the gas in the fountains. Due to angular momentum losses to the halo, we find that the fountain material falls back to smaller radii and is not largely spread over the galactic disk. Instead, the SNe ejecta fall nearby the region where the fountain was produced, a result which is consistent with recent chemical models of the galaxy. The fall back material leads to the formation of new generations of molecular clouds and to supersonic turbulence feedback in the disk.     

A material experiment for small satellites to characterise the behaviour of carbon nanotubes in space – development and ground validation

Over the last years, Carbon Nanotubes (CNT) drew interdisciplinary attention. Regarding space technologies a variety of potential applications were proposed and investigated. However, no complex data on the behaviour and degradation process of carbon nanotubes under space environment exist. Therefore, it is necessary to investigate the performance of these new materials in space environment and to revaluate the application potential of CNTs in space technologies.Hence, CiREX (Carbon Nanotubes – Resistance Experiment) was developed as a part of a student project. It is a small and compact experiment, which is designed for CubeSat class space satellites. These are a class of nanosatellites with a standardized size and shape. The CiREX design, electrical measurements and the satellites interfaces will be discussed in detail. CiREX is the first in-situ space material experiment for CNTs.To evaluate the data obtained from CiREX, ground validation tests are mandatory. As part of an extensive test series the behaviour of CNTs under solar ultra violet light (UV) and vacuum ultraviolet light (VUV) was examined. Single-walled carbon nanotubes (SWNT), multi-walled carbon nanotubes (MWNT) and MWNT/resin composite (ME) were exposed to different light sources. After the exposure, the defect density was investigated with Raman spectroscopy. There is a clear indication that UV and VUV light can increase the defect density of untreated CNTs and influence the electrical behaviour.     

基于P2P的一种负载饱和避免技术研究

在点对点体系结构的分布式虚拟环境系统中,由于客户机节点的计算能力和带宽的异构性,以及发生在客户机程序之间交互信息量的不同,会导致一些客户机出现负载饱和。一台客户机的负载饱和不仅影响本机程序的运行,也会对周围其他的客户机的运行产生影响,这限制了分布式虚拟环境系统的性能。研究提出了一种在点对点体系结构的分布式虚拟环境系统中避免客户机负载饱和的技术,试验结果显示了所提出的方法有效地改进了系统的性能。     

航空运输业排放权交易研究

首先介绍了排放权交易的起源、概念、经济理论和国际法基础,然后重点总结了欧盟将航空运输活动纳入排放权交易的主要内容,最后,提出了我国民航实施排放权交易需解决的关键问题。