Effects of uncertainties and flexible dynamic contributions on the control of a spacecraft full-coupled model

One of the most important problems for performing a good design of the spacecraft attitude control law is connected to its robustness when some uncertainty parameters are present on the inertial and/or on the elastic characteristics of a satellite. These uncertainties are generally intrinsic on the modeling of complex structures and in the case of large flexible structures they can be also attributed to secondary effects associated to the elasticity. One of the most interesting issues in modeling large flexible space structures is associated to the evaluation of the inertia tensor which in general depends not only on the geometric ‘fixed’ characteristic of the satellite but also on its elastic displacements which of course in turn modify the ‘shape’ of the satellite. Usually these terms can be considered of a second order of magnitude if compared with the ones associated to the rigid part of a structure. However the increasing demand on the dimension of satellites due to the presence for instance of very large solar arrays (necessary to generate power) and/or large antennas has the necessity to investigate their effects on their global dynamic behavior in more details as a consequence. In the present paper a methodology based on classical Lagrangian approach coupled with a standard Finite Element tool has been used to derive the full dynamic equations of an orbiting flexible satellite under the actions of gravity, gravity gradient forces and attitude control. A particular attention has been paid to the study of the effects of flexibility on the inertial terms of the spacecraft which, as well known, influence its attitude dynamic behavior. Furthermore the effects of the attitude control authority and its robustness to the uncertainties on inertial and elastic parameters has been investigated and discussed.     

多分量雷达辐射源信号的检测与分离

针对多分量雷达辐射源信号难以有效检测与分离的问题,提出了时频变换结合时变滤波的方法。通过图像分割中的区域生长法在时频平面对各分量进行检测,对其中的线性调频分量采用分数阶傅里叶变换进行优先分离,再对时频或频域没有耦合的分量进行滤波,最后通过支持向量机划分分类线,用于时频耦合分量的分离。仿真实验结果表明,该方法可以对多分量信号进行有效的检测与分离。     

Atmosphere sounding by GPS radio occultation: First results from TanDEM-X and comparison with TerraSAR-X

On 21 June 2010 the TerraSAR-X satellite was joined by the TanDEM-X satellite. A Global Positioning System (GPS) radio occultation (RO) experiment using the twin satellites has been carried out to estimate the precision of GPS atmospheric soundings. For the Day Of Year (DOY) 330–336, 2011, we analyze phase and amplitude data recorded by GPS receivers separated by a few hundred meters in a low earth orbit and derive collocated atmospheric refractivity profiles. In the altitude range 10–20 km the standard deviation between TerraSAR-X and TanDEM-X refractivity does not exceed 0.15%. The standard deviation is rapidly increasing for lower and higher altitudes; close to the surface and at an altitude of 30 km the standard deviation reaches 0.8% and 0.5%, respectively. Systematic deviations between TerraSAR-X and TanDEM-X refractivity in the considered altitude range (0–30 km) are negligible. The results confirm the anticipated high precision of the GPS RO technique. However, the difference in the retrieved refractivity in the lower troposphere for different Open Loop (OL) signal tracking parameters, altered onboard TanDEM-X for DOY 49–55, 2012, calls for an in depth analysis. At the moment we can not exclude that a potential bias in the OL Doppler model introduces a bias in our retrieved refractivity at altitudes <8$<8$ km.     

高超声速流场对自由流扰动波响应及边界层扰动波演化

采用高阶精度有限差分方法直接数值模拟了来流慢声波作用下的钝锥高超声速绕流瞬态流场,分析了自由流扰动波与流场的相互干扰,并应用Fourier频谱分析了边界层扰动波时域和空域演化.结果显示:弓形激波出现连续的“∽”变形,初始扰动被显著放大,边界层内外扰动模态存在明显差别.从空域(沿流线)演化来看,在球头附近低频扰动为主导模态,出了球头区,总扰动模态中的低频和高频成分比例迅速转变,高频模态成分显著地增大.至流场下游,大部分低频分量衰减,或者不再增长,边界层内仅存在特殊频率的不稳定波快速增长.从时域演化来看,比起其他模态,主导模态的发展对上游激励的依赖更大.无论时域还是空域演化,都存在模态竞争现象.      

大型民机双作动筒式前轮转弯操纵系统设计与仿真分析

为了提高飞机起降性能,当前飞机起落架逐步发展为采用电传操纵技术。而为了满足对低速大转角机动和大转弯力矩的要求,现代大部分大型民机都装配了双作动筒式前轮转弯系统。本文以大型民机的双作动筒式电传前轮转弯操纵系统为研究对象,针对双作动筒式前轮转弯机构设计一种随动转阀式换向阀,以满足其在死点位置时液压源换向的要求;随后基于双作动筒式前轮转弯系统对操纵控制的要求,设计了集手轮低速大角度转弯、脚蹬快速小角度转弯以及减摆功能于一体的飞机前轮操纵电液伺服系统,并建立仿真模型,进行动态仿真分析,以检验系统的各项功能。仿真结果表明,系统能够满足工程使用的要求。     

TC-1和Geotail对亚暴过程中近地等离子体片磁扰动的联合观测

以2004年9月28日02:53:20 UT的亚暴为例, 通过TC-1在磁尾约12.5 R_e 和Geotail卫星在近地磁尾等离子体片约8～9 R_e的联合观测, 研究亚暴触发过程中近地磁尾等离子体片中等离子体波动特征. 结果表明, 亚暴触发区是近地磁尾中心等离子体片中较小的一个区域, 在亚暴触发区中低混杂不稳定性在近地磁尾等离子体片中存在, 准垂直传播的低混杂波发生在亚暴触发过程中, 而亚暴触发过程中近地磁尾等离子体片外边界区内的磁场偶极化信号和扰动都非常微弱. 在亚暴触发和亚暴膨胀相过程中出现了多次具有不同特征的磁场偶极化现象.      

航母运动对舰载飞机着舰安全性的影响

总结了舰载飞机的着舰安全性分类等级,研究了航母的航行运动以及随海浪的摇晃和振荡运动对舰载机着舰安全性的影响规律,并给出了与舰载机进舰速度适配的最优航母航行速度.研究结果表明:由于航母的航行方向与舰载机的进舰方向存在一定的夹角,驾驶员在进舰过程中必须协调操纵副翼和方向舵才能保证舰载机安全准确地着舰;航母航行速度越大,驾驶员操纵量越大,着舰偏差也越大.海况越恶劣,着舰信号指挥官对航母运动的预报和补偿效果越差,着舰失败概率越大.因此,为保证舰载机的着舰安全,必须选择合适的航母航行速度,同时应尽量选择在平稳的海况下进舰着舰.      

基于静态输出反馈的大型飞机横航向控制综合

由于广泛采用轻质材料,大型飞机的结构柔性使得控制系统和结构动力学之间存在不可避免的耦合现象,控制器设计必须同时考虑结构柔性对系统反馈的贡献,并满足飞行品质、鲁棒性等目标.提出了一种利用刚体飞行动力学模型和包含弹性模态的高阶模型设计满足多种目标的控制器综合方法,首先由刚体模型设计静态输出反馈参数,满足动态响应、飞行品质和抑制阵风扰动等要求,在此基础上利用已获得的静态反馈参数针对高阶模型设计H_∞回路成形控制器,实现对结构模态的抑制,并满足系统的鲁棒性需求.仿真结果表明:设计方法能够充分利用包含弹性模态的大型飞机飞行动力学模型的特点,满足结构模态抑制和鲁棒稳定裕度等多种需求.      

一种非周期调制直扩信号扩频码估计方法

对卫星测控中一类扩频码周期与信息码周期之比为非整数的直扩信号进行了研究,得出这类信号可建模成非周期调制直扩信号,提出并讨论了一种基于差分主元分析（D PCA）的非周期调制直扩信号扩频码估计方法,该方法通过计算与差分序列协方差矩阵的最大特征值对应的特征向量完成信息码个数、子序列、信息码同步点等参数的估计,解决了传统矩阵分解方法在估计码序列时码序列相位模糊问题,理论分析和仿真结果表明该方法可以在低信噪比下进行有效估计。     

流动参数对合成射流控制叶栅流动分离的影响

采用大涡模拟方法、结构化网格建立了低压高负荷透平Pak B叶栅的非稳态数值分析模型,研究了不同流动参数对合成射流控制叶栅流动分离的影响.控制前随着雷诺数的减小和气流攻角的增大,叶栅流动分离区域变大,在气流攻角为5°下发生分离未在尾缘前再附的情况.合成射流控制后,不同流动参数下的流动分离都得到了有效的控制,并且在射流偏角为30°时,合成射流控制效果最好.合成射流使叶栅吸力面的流动分离位置推迟,再附位置前移,分离泡尺寸减小,叶栅吸力面的逆压梯度段缩短,吸力面边界层表面的剪切层在向下游迁移的过程中,没有发生充分的抬升,避免了大尺度涡旋的形成,并且很快地黏附于壁面,进而有效地控制了流动分离.