飞机大部件自动对接同步调姿方法

提出了飞机大部件自动对接同步调姿方法,实现了大部件调姿基准点的连续自动跟踪测量和位姿连续调整.在此基础上开发了集测量场构建、大部件位姿解算和调整等功能于一体的大部件自动对接集成控制软件,并在ARJ21飞机翼身自动对接现场进行了应用试验,结果证明该方法能有效完成飞机翼身自动对接过程,提高测量和对接效率.     

基于响应面法的齿轮容差设计方法研究

随着附件传动系统不断向高速、重载方向发展,齿面接触可靠性问题越来越受关注.为提高齿轮可靠性,分析了齿轮传动系统常见误差类型及影响,开展了齿轮容差设计初步探讨.根据齿轮制造、加工及系统动态误差的产生原理和作用方式,基于齿轮接触应力仿真结果,确定了影响齿轮接触应力随机性的5种主要误差形式及其特征量分布规律,提出了基于响应面法的齿轮容差设计方法,给出了齿轮系统公差设计的改进方向:在进行齿轮公差设计时,重点控制H、V方向的轴向平行度公差.     

涡轮导向器排气面积测量与分析

针对航空发动机涡轮导向器喉道面积科研生产的需求,研究发动机涡轮导向器喉道面积测量方法,解决发动机涡轮导向器喉道面积测量技术问题,满足发动机型号计量的需求,为航空发动机研制提供有力的保障.     

Nonlinear dynamic modeling of a helicopter planetary gear train for carrier plate crack fault diagnosis

Planetary gear train plays a significant role in a helicopter operation and its health is of great importance for the flight safety of the helicopter. This paper investigates the effects of a planet carrier plate crack on the dynamic characteristics of a planetary gear train, and thus finds an effec-tive method to diagnose crack fault. A dynamic model is developed to analyze the torsional vibra-tion of a planetary gear train with a cracked planet carrier plate. The model takes into consideration nonlinear factors such as the time-varying meshing stiffness, gear backlash and viscous damping. Investigation of the deformation of the cracked carrier plate under static stress is performed in order to simulate the dynamic effects of the planet carrier crack on the angular displacement of car-rier posts. Validation shows good accuracy of the developed dynamic model in predicting dynamic characteristics of a planetary gear train. Fault features extracted from predictions of the model reveal the correspondence between vibration characteristic and the conditions (length and position) of a planet carrier crack clearly.     

基于非接触式测量的旋转叶片动应变重构方法

基于叶端定时非接触式测量和振动响应传递比的概念,开展高速旋转叶片动应变重构方法的研究。在频域内推导了叶片任意测点位移与任意测点动应变的传递比,给出了单模态共振下响应传递比关于位移和应变模态振型的解析表达式;建立旋转叶片的三维(3D)有限元模型,开展考虑旋转预应力效应的叶片模态分析,提取位移和应变模态振型,获得任意转速下叶端位移与叶根关键点动应变的传递比。开展高速旋转叶片叶端定时非接触式测量实验,采用周向傅里叶算法对叶端定时信号进行处理,获得叶片在不同转速单模态共振下的叶端位移,结合响应传递比,重构5个旋转叶片的关键点动应变。结果表明:旋转叶片在9000r/min和13000r/min转速下发生1阶共振时,与应变片实测结果相比,叶根处应力最大点、次大点和边缘点3个关键点的动应变平均重构误差均小于15%,验证了旋转叶片动应变重构方法的有效性。     

非正交弧线齿面齿轮齿面设计及根切研究

非正交弧线齿面齿轮是以端面渐开线弧线齿圆柱齿轮为假想刀具包络展成的面齿轮。根据面齿轮啮合原理推导了非正交弧线齿面齿轮齿面方程,结合Matlab数学模型和根切理论研究了该种面齿轮的根切现象,计算出面齿轮不产生根切的最大内径,并通过Catia仿真滚齿来验证计算的准确性。该研究旨在提出一种新型非正交面齿轮,通过理论推导及仿真模拟来研究该种面齿轮的根切现象,在此基础上探究非正交弧线齿面齿轮的内径影响因素。研究结果表明:在同等参数下,当位置参数增大时,刀具渐开线截面高度和内径逐渐减小,当刀具圆弧半径增大时,内径逐渐减小,刀具渐开线截面高度逐渐增大。     

基于PIV技术的单圆孔脉冲射流流场特征

对稳态射流及脉冲射流冲击靶板时的流场特性结构进行了探索和分析。采用高频粒子图像测速技术,在射流管口到冲击靶板间距为6倍管径的条件下,对稳态射流进口雷诺数为6 000的稳态射流及脉冲频率为20 Hz的脉冲射流进行了实验测量,得到了射流核心区、壁面射流区及滞止区内的速度分布。研究发现:①由于射流剪切作用的影响,脉冲射流核心区的最大轴向脉动速度为稳态射流的3倍。②滞止区内,由于射流的剪切作用和壁面的滞止作用,导致了脉冲射流轴向速度梯度最大为稳态射流的2倍,同时,滞止区内的最大脉动速度是稳态射流脉动速度的3倍。③脉冲射流对壁面的卷吸以及旋涡的产生和传播过程,破坏了壁面射流区稳定的速度边界层。相比稳态射流,脉冲射流的流场增加了湍流相干结构的含能并产生周期性的大尺度卷吸涡。     

两次载荷分流齿轮传动构型的静力学均载特性

为改善面齿轮-圆柱齿轮两次载荷分流传动构型的均载特性,考虑齿轮的中心偏移、轴与轴承的承载变形等因素,依据构型的变形协调条件和力矩平衡方程,建立了传动构型的静力学模型,研究了轴的扭转和支撑刚度对均载特性的影响。结果表明:输入轴扭转刚度对均载特性几乎没有影响;分扭轴扭转刚度取合适的比值,则面齿轮分扭传动级可获得较好的均载特性,但圆柱齿轮分扭传动的均载特性几乎无变化;减小双联齿轮轴扭转刚度或增加双联轴支撑刚度可提高该构型的均载特性。因此,为提高该传动构型的均载特性,轴的扭转刚度和支撑刚度需采用参数匹配的设计方法。     

Advances in critical technologies for hypersonic and high-enthalpy wind tunnel

Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster, higher and further. The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development. There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes. These wind tunnels are named as air-directly-heated hypersonic wind tunnel, light-gas-heated shock tunnel, free-piston-driven shock tunnel and detonation-driven shock tunnel, respectively. The critical technologies for developing the wind tunnels are introduced in this paper, and their merits and weakness are discussed based on wind tunnel performance evaluation. Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments. Three kinds of the measurement techniques considered to be of primary importance are introduced here, including the heat flux sensor, the aerodynamic balance, and optical diagnosis techniques. The techniques are developed usually for conventional wind tunnels, but further improved for hypersonic and high-enthalpy tunnels. The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future. Therefore, several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.     

航空燃油齿轮泵滑动轴承非线性瞬态性能数值分析

为研究航空燃油齿轮泵滑动轴承在复杂交变载荷扰动下的瞬态润滑行为,建立了燃油齿轮泵滑动轴承的瞬态计算模型。该模型考虑了滑动轴承油膜空化边界的质量守恒和其所处非线性动态承载环境的影响。在此基础上使用批处理技术实现了燃油齿轮泵和滑动轴承的联合仿真计算,在滑动轴承的瞬态润滑计算过程中计入了燃油泵瞬态内流场和其动态载荷的耦合作用。以此进行了恒定载荷和动态载荷工况下的轴心轨迹稳定性分析以及轴承瞬态润滑性能分析研究。研究结果表明：滑动轴承计算模型的计算结果与实验数据较为吻合,误差保持1.2%以内;燃油齿轮泵的动态载荷对轴心轨迹的影响体现在轨迹启动段偏移的增大以及静平衡位置的消失;通过不同关键参数的对比研究发现：合理的增大宽径比或减小间隙比可以获得更为理想的轴心轨迹静平衡位置,但对于轴承转子运动的稳定性,间隙比由0.2%增至0.6%时,未稳定阶段轴心位置的变化趋势由双峰变为单峰,速度稳定段曲线的波动幅值先增大后趋于不变;当宽径比由0.6增至1.2时,全周期内速度响应曲线的偏移降低,轴心运行的稳定性提高;在轴承瞬态润滑特性中对于轴承载荷变化泄露流量具有的敏感性较强而最小油膜厚度的敏感性较差。