基于变参数广义结构的距离扩展目标检测方法

针对特定杂波背景下的最优或次优检测器结构难以适应过渡杂波环境的问题，首先，给出基于变参数广义结构的距离扩展目标检测器，通过调整参数来适应杂波特性。其次，确定检测器最佳参数的经验公式，经验公式符合数值结果。最后，利用仿真试验分析检测器的检测性能。仿真结果表明，在介于高斯和复合高斯杂波之间的过渡环境中，提出的检测器比现有检测器具有更加优异的目标检测性能，对杂波非高斯程度时空渐变性具有较强的适应能力。     

动能拦截器运动伪装末制导律设计

针对动能拦截器末制导问题，基于运动伪装理论设计了末制导律和相应的脉冲宽度脉冲频率(PWPF)调节器。根据拦截器和目标在视线旋转坐标系下的相对运动关系建立了动力学模型。通过运动伪装特性得出的拦截条件推导出作用在视线法向上的制导指令表达式。在动能拦截器制导推力受限情况下，利用PWPF调节器调节制导指令。考虑系统的可控条件和拦截条件，对调节器参数进行了理论设计。运动伪装末制导律保证动能拦截器在制导过程起到伪装作用，具有较高的制导精度和较小的命中过载，同时经过参数设计后的PWPF调节器可以节省燃料。最后，通过数值仿真校验了所设计末制导律的正确性和有效性。     

高压涡轮导叶非轴对称端壁优化设计

为使高压涡轮导叶非轴对称端壁造型在减少二次流损失、提高气动性能方面更好的发挥作用,以某一级高压涡轮为研究对象,采用端壁参数化造型、三维Navier-Stokes（N-S）方程流场求解和基于人工神经网络的遗传算法相结合的优化方法对涡轮导叶进行非轴对称端壁的优化设计。优化目标为在控制涡轮导叶进口质量流量、出口马赫数及出口气流角的情况下,导叶出口总压损失系数和出口二次流动能最小化。对比分析优化前后端壁对涡轮导叶出口参数和涡轮级性能的影响。结果表明：优化后得到的非轴对称端壁有效地改善了涡轮导叶通道内的流场,抑制了通道内二次流涡系的发展,降低了导叶出口处的流动损失,涡轮导叶出口总压损失系数降低了14．85％,高压涡轮级等熵效率提高了0．456％。     

一种求解Euler方程的简化气体动理学模型

基于一种简化的平衡分布函数,提出一种新的动理学通量矢量分裂（KineticFluxVectorSplitting,KFVS）格式来求解Euler方程。算例证实,新的KFVS格式继承了原始KFVS格式中捕捉激波准确、无数值震荡的优点。与原始的KFVS格式相比,由于简化的平衡分布函数与Maxwellian平衡分布函数相比复杂程度大大降低,计算中不需要再计算误差函数,新的KFVS格式的计算效率得到了很大提高。在同样的计算精度下,新KFVS格式比原始KFVS格式计算效率提高了一倍以上,显示了新格式具有良好的数值模拟性能。     

小型SAR卫星用双高特性锂离子电池技术

小型合成孔径雷达(SAR)卫星对储能电池系统提出了轻量化、大功率的要求,现有的SAR卫星用电池难以满足需求,急需开发高能量高功率的锂离子电池。采用兼具容量和功率性能的镍钴铝酸锂(LiNixCoyMnzO2, NCA)作为正极活性材料,高容量中间相炭微球(MCMB)作为负极活性材料,显著提升了电池体系的容量和比能量。通过设计极片的活性物质载量和电解液用量,保证了电池功率性能(≥10 C)的发挥;通过加大电极片面积和极柱尺寸,控制了大倍率放电时电池温升。研制了兼顾高比能和高功率的锂离子电池单体,额定容量20 Ah,1 C放电比能量达到180 Wh.kg^-1,且10 C放电容量相较1 C保持率96.24%,15 C下持续放电比功率超过2 000 W.kg^-1,可以满足下一代轻小型SAR卫星能源供电需求。     

(70~100)MeV准单能中子参考辐射场设计

国内基于串列加速器建立了144keV~15MeV的单能中子参考辐射场，解决了20MeV以下能区中子探测器注量、剂量等参数的量值溯源，但尚未建立20MeV以上能区准单能中子参考辐射场。随着航天空间中子探测任务的需要以及地面高能质子加速器的发展，20MeV以上能区准单能中子参考辐射场需求越来越突出。发展20MeV以上能区高能中子参考辐射场对于满足国防需求、推动中子计量学科发展具有重要意义。     

大型风机桨叶技术研究

综述分析了国外大型风机在翼型、噪声、结冰等气动问题的研究进展.概述了大型风机的材料问题和智能桨叶控制研究现状,归纳分析了智能桨叶控制常用的气动控制装置、作动装置、传感器和控制器,可为国内风能领域科研人员了解国外大型风机研究工作提供参考.     

Intrinsic physical relationships between rotor modal shapes and instantaneous vibrational energy flow transmission characteristics: Theoretical and numerical analysis and application

The modal vibration of the rotor is the main cause of excessive vibration of the aero-engine overall structure. To attenuate the vibration of the rotor under different modal shapes from the perspective of energy control, the intrinsic physical relationships between rotor modal shapes and instantaneous vibrational energy flow transmission characteristics is derived from the general equation of motion base on the structural intensity method. A dual-rotor-support-casing coupling model subjected to the rotor unbalanced forces is established by the finite element method in this paper. The transmission, conversion and balance relationships of the vibrational energy flow for the rotors in the first-order bending modal shape, the conical whirling modal shape and the translational modal shape are analyzed, respectively. The results show that the vibrational energy flow transmitted to the structure can be converted into the strain energy, the kinetic energy and the energy dissipated by the damping of the structure. The vibrational energy flow transmission characteristics of rotors with different modal shapes are quite different. Especially for the first-order bending modal shape, the vibrational energy flow and the strain energy are transmitted and converted to each other in the middle part of the rotor shaft, resulting in large deformation at this part. To attenuate this harmful vibration, the influences of grooving on the shaft on the first-order bending vibration are studied from the perspective of transmission control of vibrational energy flow. This study can provide theoretical references and guidance for the vibration attenuation of the rotors in different modal shapes from a more essential perspective.     

A study on turbulence transportation and modification of Spalart–Allmaras model for shock-wave/turbulent boundary layer interaction flow

It is of great significance to improve the accuracy of turbulence models in shock-wave/ boundary layer interaction flow. The relationship between the pressure gradient, as well as the shear layer, and the development of turbulent kinetic energy in impinging shock-wave/turbulent boundary layer interaction flow at Mach 2.25 is analyzed based on the data of direct numerical simulation(DNS). It is found that the turbulent kinetic energy is amplified by strong shear in the separation zone and the adverse pressure gradient near the separation point. The pressure gradient was non-dimensionalised with local density, velocity, and viscosity. Spalart–Allmaras(S–A) model is modified by introducing the non-dimensional pressure gradient into the production term of the eddy viscosity transportation equation. Simulation results show that the production and dissipation of eddy viscosity are strongly enhanced by the modification of S–A model. Compared with DNS and experimental data, the wall pressure and the wall skin friction coefficient as well as the velocity profile of the modified S–A model are obviously improved. Thus it can be concluded that the modification of S–A model with the pressure gradient can improve the predictive accuracy for simulating the shock-wave/turbulent boundary layer interaction.     

机载大功率超导发电机发展现状与展望

新一代飞机对电力的需求越来越大,尤其是定向能武器的使用,将需要兆瓦(MW)级的电源系统。由于超导发电机发电功率大、结构简单、重量轻,是机载大功率用电设备的理想电源。本文综述了机载超导发电机的类型、研究进展和关键技术,分析指出了其未来的发展前景。