一种步进频率信号认知雷达波形优化设计方法

认知雷达常用于完成探测、跟踪、成像及识别等多重任务,为提高其综合性能,需兼顾多方面因素研究其波形优化设计问题。基于此,提出一种基于压缩感知（CS）RIPless准则的步进频率信号认知雷达波形优化设计方法。首先,建立了目标回波信号稀疏模型,分析了其与发射信号模糊函数之间的关系。其次,根据模型中观测矩阵的构造,基于RIPless准则,将波形设计问题转化为概率分布的互相干参数及其协方差矩阵的条件数的优化问题,从而通过自适应寻优算法,获得优化的步进频率信号脉冲重复时间间隔序列和子脉冲频率序列。相较于传统方法,所提方法在信号发射与接收之间形成了信息实时反馈和信号优化重构的闭环,在高概率准确重构目标径向一维距离像的同时,也实现了发射信号模糊函数的优化。最后,仿真计算验证了所提方法的有效性。     

随机环境应力冲击下基于多参数相关退化的导弹部件寿命预测

为了解决某型导弹部件的贮存寿命预测问题,提出了一种随机环境应力冲击下基于多参数相关退化的寿命预测方法。针对产品存在退化失效与突发失效两种失效模式,利用Wiener、Gamma及Inverse Gaussian等随机过程模型拟合各性能参数的退化数据,并采用Copula函数进行相关性退化失效建模;利用随机环境应力冲击解释突发失效的机理,并采用非均匀泊松过程对突发失效建模;进而建立退化失效与突发失效竞争的贮存寿命预测模型。实例应用说明所提方法能够反映出导弹部件的失效规律,比传统预测方法具有更高的预测准确性,具有较好的工程应用价值。     

基于深度图像的人体关节点定位方法

提出了一个基于深度图像的人体关节点定位的方法:首先将图像中的人体区域分割出来,然后利用随机森林分类器对逐个像素点进行分类,得到身体的各个部件并寻找关节点的位置。通过实验发现,本方法准确性较高并具有一定实时性。分类的准确率为 68%,相较 Kinect技术(40%)达到了较高的分类水平。预测人体关节点位置的平均时间为每帧 150ms,符合实用性要求。     

基于RBF带学习能力高精度非线性FDD设计

在轨航天器故障检测与诊断问题需要面对模型的非线性,而且要求尽量提高其检测的精度,为此设计了基于径向基函数（RBF）神经网络的动量轮非线性故障检测与诊断（FDD）方案。首先应用RBF补偿建模误差,提高检测精度,并选择李雅普诺夫函数证明其收敛性;然后应用非线性观测器来产生故障残差,给出了阈值以及故障检测的时间;应用RBF网络对故障信号进行重构,并据此设计了带学习能力的FDD策略。再次建立了详细的动量轮模型,通过不同条件下的仿真研究分别验证残差的阈值特性、时间特性以及RBF的重构能力,仿真结果表明了算法的有效性。     

离散拓扑业务模型中多媒体LEO网络性能分析

针对快速发展的多媒体卫星网络,提出一种新的低地球轨道卫星网络性能的定量研究模型。该模型考虑了星座动态拓扑变化和全球业务需求变化的复杂特点,建立了离散时间下的业务和拓扑映射关系;依据马尔科夫过程理论和卫星链路带宽约束条件,对实时和非实时两种类型业务采用概率分析方法,推导出定量计算阻塞概率、排队时延等网络性能参数的公式。大量仿真结果表明理论分析方法的正确性和有效性。该研究方法可用于多媒体低地球轨道卫星网络QoS路由管理和资源分配设计的参考。     

Testing the three-dimensional IRI-SIRMUP-P mapping of the ionosphere for disturbed periods

This paper describes the three-dimensional (3-D) electron density mapping of the ionosphere given as output by the assimilative IRI-SIRMUP-P (ISP) model for three different geomagnetic storms. Results of the 3-D model are shown by comparing the electron density profiles given by the model with the ones measured at two testing ionospheric stations: Roquetes (40.8°N, 0.5°E), Spain, and San Vito (40.6°N, 17.8°E), Italy. The reference ionospheric stations from which the autoscaled foF2 and M(3000)F2 data as well as the real-time vertical electron density profiles are assimilated by the ISP model are those of El Arenosillo (37.1°N, 353.3°E), Spain, Rome (41.8°N, 12.5°E), and Gibilmanna (37.9°N, 14.0°E), Italy. Overall, the representation of the ionosphere made by the ISP model is better than the climatological representation made by only the IRI-URSI and the IRI-CCIR models. However, there are few cases for which the assimilation of the autoscaled data from the reference stations causes either a strong underestimation or a strong overestimation of the real conditions of the ionosphere, which is in these cases better represented by only the IRI-URSI model. This ISP misrepresentation is mainly due to the fact that the reference ionospheric stations covering the region mapped by the model turn out to be few, especially for disturbed periods when the ionosphere is very variable both in time and in space and hence a larger number of stations would be required. The inclusion of new additional reference ionospheric stations could surely smooth out this concern.     

基于实时观测数据的大气密度模式修正

针对国际大气密度模式NRLMSISE-00, 以中国神舟飞船探测数据为基础, 提出一种基于实时大气密度观测数据的模式修正方法. 通过计算分析模式计算结果与探测数据的误差分布特征, 针对地磁相对平静期(Ap≤ 30)模式计算的误差特点, 建立了一种平均误差修正方法, 即认为在相对平静期, 在相同纬度和地方时, 模式误差基本相同, 某一时刻模式预测误差可以近似用与其相同纬度和地方时的平均误差来替代, 从而对模式预测结果进行修正. 以神舟4号探测数据为基础, 通过对模式预测结果采用两种方式进行修正, 可以看到模式误差得到了一定的改善. 采用误差库累积准实时修正, 修正后的误差由原来的20 %降至6 %; 采用误差库5天滑动预报修正后, 模式提前1, 2, 3天的预测误差由原来的20 %分别降至7.8 %, 9.4 %和10.5%.      

基于动态RCS的无人机航迹实时规划

传统的无人机航迹规划主要采用仅考虑无人机与雷达距离的简化雷达威胁模型,未充分考虑无人机雷达散射截面RCS(Radar Cross-Section)随自身姿态角改变而产生的动态变化.据此,提出了无人机周向动态RCS模型,并建立了综合考虑无人机动态RCS与雷达距离的探测概率模型,利用遗传算法进行了基于动态RCS的航迹实时规划,计算结果与传统航迹规划结果进行了对比.仿真结果表明该模型的可行性和有效性,能充分利用无人机自身的优势规避威胁,满足无人机的航迹实时规划的要求.      

改进的风险优先数(RPN)分析方法

针对工艺故障模式影响分析(PFMEA,Process Failure Modes and Effects Analysis)中风险优先数(RPN,Risk Priority Number)分析方法存在的缺陷,在分析导致这些缺陷的原因的基础上,提出了一种基于费用及发生概率的定性与定量相结合的RPN分析方法.该方法中定性分析部分以传统RPN分析方法中的严酷度等级评价为基础,对工艺故障模式的严酷度等级进行评价;定量分析部分以故障模式发生后导致的费用损失的期望值作为RPN值.改进后的RPN分析方法中,定量化的数据使得风险排序更为客观、准确.最后,使用改进后的RPN分析方法对相控阵雷达中某组件的滤波器装配工艺进行了PFMEA分析,取得了良好的效果.      

The photometric study of light scattering from the surface of alumina powder and interpretations by Hapke formula

A laboratory experiment helps to understand the light scattering property of regolith like samples with known compositions and other physical parameters. The laboratory data so obtained can be compared with the existing in situ data on celestial objects like asteroids. Further, it may be analyzed with the help of various theoretical models to understand the light scattering processes from regolith more clearly. In this work we have performed laboratory based photometry of the light scattered from the surfaces of powdered alumina (Al₂O₃) at various tilt angles of the sample and at large phase angles, with the particles having diameter 0.3 μm. The wavelength of observation was 632.8 nm. These data have been fitted by a surface scattering model originally suggested by Hapke. Instead of using empirical Henyey–Greenstein phase function to fix the values of albedo and phase function to be used within Hapke formula, we have used Mie theory for the same. This approach helped us to determine the single particle properties such as particle diameter and complex refractive index from surface scattering phase curve alone. Mie theory depends only on the size parameter X(=2π(radius/wavelength)) and complex refractive index (n, k) of the material. Since the absorption coefficient (k) for alumina is known to be very low but not exactly zero, the best fit to the experimental data was obtained by least square technique with k as a free parameter, as the other parameters are known. Finally, we compare our results with other published results and discuss the scope of application of the method we adopted.