卫星天线反射面板热形变面形误差检测方法

为实现航天卫星天线面板热形变面形误差高精度检测,提出利用三坐标测量系统搭载高精度激光位移传感器,对检测对象进行扫描测量;并通过对其系统误差来源进行分析、公差合理分配及误差控制,提出对测量系统进行整体优化,以满足所提出检测精度要求。为验证所提出方法的可行性,搭建测量系统,对标准试件的测量数据进行面形拟合,获得测量偏差优于±4.22μm/m2;分别制作常规铝板及光滑铝板作为测试对象,在其背部黏贴加热板的加热方式,以模拟卫星面板在实际工作环境中发生热形变。采用提出的方法对其进行了热形变面形误差检测实验,检测结果验证了所提出方法的可行性。     

Stability and shape analysis of relative equilibrium for three-spacecraft electromagnetic formation

The invariant shapes for close formation flying with inter-craft electromagnetic force ensure several potential space applications. However, the 6-DOF relative equilibrium problem has not been systematically investigated. This paper mainly analyzes the invariant shapes of relative equilibrium for the three-spacecraft electromagnetic formation, and studies the families of invariant shape solutions with real and constant magnetic moments as well as their linear stability. The problem is examined based on the full nonlinear coupled dynamic models for collinear and general triangular configurations. The relative equilibrium conditions are analyzed to determine whether an invariant shape do exist, and the corresponding families of invariant shape solutions are identified for static and spinning configurations respectively. Finally, the linear stability of such invariant shapes is numerically discussed, which have shown that most invariant shapes are unstable and controllable.     

Polarization model for discrimination of broad and needle shaped leaves and estimation of LAI using polarization measurements

Method for estimation of Leaf Area Index (LAI) based on polarized radiance measurements is proposed. Leaf angle dependency on LAI estimation can be taken into account by considering polarization characteristics of leaves. Effectiveness of the proposed method is confirmed with the polarized radiance from tealeaves and the other needle leaf types of grasses. Convenient way to monitor quality and amount of leaves with network camera with polarization film is also proposed.     

Soil moisture mapping over the Chinese Loess Plateau using ENVISAT/ASAR data

In this paper, we used the available algorithm for soil moisture estimation over LOPEX05 (the Loess Plateau land surface process Experiment (2005)) area. The available algorithm used ENVISAT/ASAR AP mode VV polarization observational data at a low incidence angle and ground measured soil moistures. The ground measurements were performed in the summer of the 2005 during the LOPEX05 field campaign. The validated results indicate that an average difference between the soil moistures estimated from the microwave remote sensing and ground measurements is less than 0.02 cm³/cm³, with a RMS error of 2.0%, and a maximum less than 0.04 cm³/cm³. The algorithm was applied to the surface soil moisture mapping later. The results show that this algorithm is suitable for monitoring soil moisture information of the agricultural fields over the Chinese Loess Plateau, when ground land cover situation and the resolution of imagery data are taken into account. However, we also find that there are large differences over the steep slope region, the edge of mesa. The results are not acceptable for surface soil moisture estimation in these regions. Thus, the surface soil moisture retrieval in the steep slope region of the Loess Plateau need to be further investigated in the future.     

Deriving remote sensing reflectance from turbid Case II waters using green-shortwave infrared bands based model

The objectives of this study are to validate the applicability of a shortwave infrared atmospheric correction model (SWIR-based model) in deriving remote sensing reflectance in turbid Case II waters, and to improve that model using a proposed green-shortwave infrared model (GSWIR-based model). In a GSWIR-based model, the aerosol type is determined by a SWIR-based model and the reflectance due to aerosol scattering is calculated using spectral slope technology. In this study, field measurements collected from three independent cruises from two different Case II waters were used to compare models. The results indicate that both SWIR- and GSWIR-based models can be used to derive the remote sensing reflectance at visible wavelengths in turbid Case II waters, but GSWIR-based models are superior to SWIR-based models. Using the GSWIR-based model decreases uncertainty in remote sensing reflectance retrievals in turbid Case II waters by 2.6–12.1%. In addition, GSWIR-based model’s sensitivity to user-supplied parameters was determined using the numerical method, which indicated that the GSWIR-based model is more sensitive to the uncertainty of spectral slope technology than to that of aerosol type retrieval methodology. Due to much lower noise tolerance of GSWIR-based model in the blue and near-infrared regions, the GSWIR-based model performs poorly in determining remote sensing reflectance at these wavelengths, which is consistent with the GSWIR-based model’s accuracy evaluation results.     

星光折射连续修正方法及制导规划

针对星光折射模型本身固有的缺点，对星光折射连续修正方法进行了研究，该方法首先探索折射星的分布规律，而后采用Unscented卡尔曼滤波算法+多星连续观测的方案实现定位。同时，对可用星与选星要素和基于突防规划的星光制导弹道设计两方面进行了研究，在星光制导制约机理研究的基础上，提出了惯性/星光制导规划方法，该方法包括导航星的优选策略、导航星优选技术和星点位置的精确计算3步。最后，介绍了星光制导系统的系统组成和功能原理。     

Mach reflection in steady supersonic flow considering wedge boundary-layer correction

Mach reflection in steady supersonic flow is an important phenomenon having received extensive studies, among which simplified theoretical models to predict the size of Mach stem and other flow structure are of particular interest. Past efforts for such models were based on inviscid assumption while in real cases the flow is viscous. Here in this paper we consider the influence of wedge boundary layer on the Mach stem height. This is done by including a simplified boundary layer model into a recently published inviscid model. In this viscous model, the wedge angle and the trailing edge height, which control the Mach stem height, are replaced by their equivalent ones accounting for the displacement effect of the wedge boundary layer, with the boundary layer assumed to be laminar or fully turbulent. This viscous model is shown to compare well with numerical results by computational fluid dynamics and gives a Mach stem height as function of the Reynolds number and Mach number. It is shown that due to the viscous effect, the Mach stem height is increased, through increasing the effective wedge angle.     

基于落点预测的高旋火箭弹弹道修正算法

高旋火箭弹的修正控制是基于等效力实现的二维弹道修正控制，由于弹体存在陀螺进动和马格努斯效应，在控制力作用下产生的附加攻角引起的升力与控制力的矢量合为等效力，其大小与方向在控制过程中不断变化，不能简单根据偏差量（修正量）的比例关系来确定控制力的方向。基于此，分析了控制力与等效力的关系，提出了一种基于弹道落点预测的控制算法。首先利用弹道落点预测模型实时预测落点与目标的偏差量，然后利用小扰动法构造偏差量对控制量的敏感系数矩阵，通过偏差量与敏感系数矩阵解算出纵、横两个方向的需用控制量。采用修正前后速度矢量的位置关系得到控制量的合矢量及其方位角，并利用控制量的合矢量与等效力计算出控制周期，在控制周期内按照等效力方位角调整控制力的方向实现对高旋火箭弹的精确控制，解决了非线性耦合问题。仿真结果表明该算法具有较高的控制精度，为工程应用提供理论依据。     

基于三维有限元的火箭模态振型斜率预示方法研究

振型斜率火箭是姿控系统设计的重要参数,对飞行任务的可靠性与安全性有着至关重要的作用。依据全箭动特性的测量原理及参数定义,结合三维有限元建模方法和模型修正技术,全面考虑了速率陀螺、惯组安装位置处的局部刚度对振型和振型斜率的影响,建立了基于局部细节精细化建模的全箭模态振型斜率预示方法,并总结了3种不同的振型斜率提取方法,提高了振型斜率的预示精度。同时提供了三维模型振型一维化的方法,解决了使用三维有限元模型计算弹性运动方程式系数的难题。