基于位置修正的轨迹测量方法研究

传统精密轨迹测量方法大都采用GPS、全站仪等设备,存在设备不易架设、数据不连续、对环境要求较高等缺点。针对该问题提出一种基于航位推算系统的轨迹测量方法。该方法在航位推算基础上引入了位置修正技术,通过起始点与终点坐标即可计算出系统俯仰角误差、方位角误差及里程仪标度因数误差。系统完成航位推算计算后,用求解出的系统误差对航位推算轨迹进行修正,即可获得高精度的轨迹数据。最后通过试验验证该方法可行,系统行进153m误差小于0.12m。     

Global aerodynamic design optimization based on data dimensionality reduction

In aerodynamic optimization, global optimization methods such as genetic algorithms are preferred in many cases because of their advantage on reaching global optimum. However, for complex problems in which large number of design variables are needed, the computational cost becomes prohibitive, and thus original global optimization strategies are required. To address this need, data dimensionality reduction method is combined with global optimization methods, thus forming a new global optimization system, aiming to improve the efficiency of conventional global optimization. The new optimization system involves applying Proper Orthogonal Decomposition (POD) in dimensionality reduction of design space while maintaining the generality of original design space. Besides, an acceleration approach for samples calculation in surrogate modeling is applied to reduce the computational time while providing sufficient accuracy. The optimizations of a transonic airfoil RAE2822 and the transonic wing ONERA M6 are performed to demonstrate the effectiveness of the proposed new optimization system. In both cases, we manage to reduce the number of design variables from 20 to 10 and from 42 to 20 respectively. The new design optimization system converges faster and it takes 1/3 of the total time of traditional optimization to converge to a better design, thus significantly reducing the overall optimization time and improving the efficiency of conventional global design optimization method.     

Optimization of entry-vehicle shapes during conceptual design

During the conceptual design of a re-entry vehicle, the vehicle shape and geometry can be varied and its impact on performance can be evaluated. In this study, the shape optimization of two classes of vehicles has been studied: a capsule and a winged vehicle. Their aerodynamic characteristics were analyzed using local-inclination methods, automatically selected per vehicle segment. Entry trajectories down to Mach 3 were calculated assuming trimmed conditions. For the winged vehicle, which has both a body flap and elevons, a guidance algorithm to track a reference heat-rate was used. Multi-objective particle swarm optimization was used to optimize the shape using objectives related to mass, volume and range. The optimizations show a large variation in vehicle performance over the explored parameter space. Areas of very strong non-linearity are observed in the direct neighborhood of the two-dimensional Pareto fronts. This indicates the need for robust exploration of the influence of vehicle shapes on system performance during engineering trade-offs, which are performed during conceptual design. A number of important aspects of the influence of vehicle behavior on the Pareto fronts are observed and discussed. There is a nearly complete convergence to narrow-wing solutions for the winged vehicle. Also, it is found that imposing pitch-stability for the winged vehicle at all angles of attack results in vehicle shapes which require upward control surface deflections during the majority of the entry.     

一种新型二元风洞侧壁干扰修正方法——当地修正法

针对现行总体型二元风洞侧壁干扰修正方法的不合理性，本文发展了一种新型修正方法——当地修正法，并就有关问题做了讨论。与目前的总体型方法相比，当地修正法致力于对模型当地流动参数的修正，而不是笼统地去调整试验条件。当地修正法有能力处理那些主要的侧壁边界层效应及相关问题，是未来开展侧壁干扰修正的一条有效途径。     

增升状态下的全机位流数值模拟

研究了势流理论下的全机增升装置复杂外形气动力数值计算方法,该方法以低阶面元法为基础,具有计算量小、速度快的优点.复杂流动的粘性效应主要通过附面层粘性修正技术加以体现.采用该方法对某增升装置翼身组合体外形压力分布特性进行计算,并和风洞实验数据相比较,验证了方法的正确性和实用性.在此基础上对某型飞机真实复杂外形的压力分布特性进行了计算,为复杂外形飞行器增升装置的初步设计、方案选型与评估提供了非常理想的工程技术手段.     

基于Kriging模型插值的孔位修正策略

飞机装配时的孔位精度直接影响其最终装配质量，而待制孔零件易发生变形和整体偏移，因此一般通过基准孔信息对待制孔位进行补偿。提出一种基于Kriging插值的孔位修正方法，通过基准孔建立孔位理论坐标与实际偏差值的Kriging模型，进而预测待制孔的孔位偏差，并给出每个位置的预测标准误差，以指导基准孔的增添和布置。最后通过有限元和数值实验分别验证了零件在极限变形和整体平移旋转情况下该方法的有效性，实现了孔位估计误差小于0.3 mm。     

ATC模拟系统中存贮系统的容错技术

ATC 模拟系统是一个比较复杂的,实时性很强的控制系统,要求整个系统的可靠性很高。而对于一个系统来讲,其中央存贮系统是保证整个系统正常工作的关键部件之一。在我们引进的系统中,它的容错技术在设计上有其独到之处。本文就其存贮系统的结构、容错技术及支持电路这三部分予以说明和论述,仅供同行参考。     

星外管路多层隔热组件热参数确定方法

提出了利用整星热平衡试验数据确定星外管路多层组件热参数的方法,解决了以往星外管路热设计在地面热试验验证不充分的难题。以某卫星星外管路为例,通过对星外管路试验状态模型的修正,确定了星外管路多层隔热组件热参数,并分析了星外管路的在轨极端温度。根据确定的星外管路多层隔热组件热参数计算出的星外管路温度,与在轨温度数据符合较好,验证了此方法的有效性。     

垭口地貌要素对风速分布规律影响的风洞试验研究

输电线路微地形气象灾害的调查研究显示,垭口地貌影响下的输电线路风偏闪络事故多发。鉴于垭口地貌不同位置处的风剖面分布规律尚不明确,借助风洞试验,研究了垭口地貌的山丘坡度、谷口宽度等地貌要素对山谷及山脊中轴线上风速分布规律的影响。风洞试验结果表明：与平地风速相比,山谷中轴线及山丘峰顶处风速的最大加速幅度分别达到了33％和53％,明显大于规范规定的10％,容易造成垭口区域内输电线路风偏闪络或倒塔;山谷中轴线风速修正系数随两侧山丘坡度增加而增加,随谷口宽度增加而减小,提出了符合这一规律的计算公式;山谷中轴线上,下风侧风速加速效应略强于上风侧;垭口两侧山丘山顶处风速未受垭口地貌影响,风洞试验测得风速修正系数与单体山丘拟合公式的计算结果基本一致;设计时可统一偏于保守地取用山丘顶部的风速修正系数对平地风速予以修正。     

一种折叠弹翼悬挂物的分离轨迹试验技术

提出了一种新的折叠弹翼悬挂物机弹分离轨迹试验技术,重点解决了在机弹分离过程中折叠弹翼动态展开时悬挂物的气动力获取问题。研究表明,提出的试验技术通过将悬挂物气动力修正方法引入到悬挂物分离安全性研究当中,准确地得到悬挂物的分离特性,解决了折叠弹翼悬挂物分离轨迹风洞试验技术瓶颈,为折叠弹翼悬挂物的投放分离安全性提供一套工程实用的解决方案。