联合射流控制技术的增升效果和机理

数值模拟联合射流翼型的绕流,研究联合射流控制技术的增升效果和机理.主控方程选为定常可压缩流动的质量加权平均N-S方程和S-A湍流模型,使用Fluent软件进行数值求解.计算结果表明,联合射流控制技术可以有效地减小翼型的零升迎角、提高翼型的最大升力系数和失速迎角.通过理论分析,揭示了联合射流控制技术的增升机理,即通过增加翼型上表面的流速从而增大绕翼型的环量,通过向边界层内注入能量从而延迟翼型大迎角下的流动分离.     

液体燃料脉冲爆震发动机点火方法研究

目前脉冲爆震发动机的起爆主要采用爆燃向爆震转变的方式实现,而爆燃波发展缓慢,消耗了循环周期的很长一段时间。为缩短爆燃向爆震转变的时间和距离,本文研究了一种新型蒸发管点火系统,用蒸发管对两相混合物进行预蒸发,在预燃室内点火形成火焰射流进入主爆震室,实现主爆震室内两相混合物的快速短距离起爆。热态实验在内径120mm,长2500mm的爆震室上进行。与火花塞直接在主爆震室点火相比起爆时间可以从12.5ms缩短到2～3ms,起爆距离可以从1350mm缩短到775mm。预燃室长度和个数对起爆过程也具有非常明显的影响,长度和个数的增加都有利于爆震波的起爆。     

弹体自旋条件下姿控发动机控制律设计

针对大气层内带有横向喷流姿控发动机和尾部气动舵的导弹,研究了弹体自旋条件下的姿态控制问题。以导弹的横向加速度为输出,建立了姿态系统数学模型,并对模型进行了分析和简化。考虑了双通道控制和单通道矢量控制两种控制方式,针对姿控发动机的离散工作特点,分别研究了控制律设计问题,实现了横向加速度的快速跟踪。针对喷流干扰效应,给出了喷流放大因子的在线估计算法。最后,进行了数值仿真,仿真结果说明了所提方法的有效性。     

密集型阵列冲击射流换热特性实验

设计了多种不同几何参数的阵列射流冲击孔实验件,利用红外热像仪对其冲击冷却进行了热像显示实验,获得了冲击射流雷诺数和几何参数对局部对流换热特性的影响规律.结果表明:①对流换热系数随着射流雷诺数R_ej的增加而逐渐增大;②随着孔间距的或者冲击间距的增大,冲击冷却的对流换热效果逐渐减弱;③当孔间距与孔径之比在3～5时,顺排阵列射流的强化换热效果优于叉排,而当孔间距与孔径之比为2时,在阵列射流上游叉排排布的强化换热效果优于顺排,而在下游则顺排排布的强化换热效果占优.      

半封闭通道射流冲击孔流量系数的实验

对半封闭通道射流冲击孔的流量系数进行了实验研究,针对单排、双排冲击孔结构,在变化各种几何参数及流动参数的情况下,较为系统地获得了射流孔展向间距与射流孔直径之比、射流孔流向间距与射流孔直径之比、射流冲击间距与射流孔直径之比、射流孔倾角等因素对于流量系数随射流雷诺数的变化曲线.通过对比分析,讨论了各种因素对流量系数的影响.      

静电场对轴对称射流雾化效果的影响

设计和组装一台实验装置,研究了柴油通过压缩空气进行喷射时,静电场对轴对称射流液体的浓度分布影响。结果表明：在无电场作用时,随着靶盘距喷嘴距离的增加,液流浓度逐渐减小;当喷雾压力增加时,射流轴线上的液流浓度变化较大;随着距轴心线距离的增加,液流浓度的变化逐渐趋于平缓,最后基本达到稳定。在静电场作用时,随着电场强度逐渐增大,液流的雾化分布与增加空气压力时液流的雾化分布具有基本相同的特点,电场强度对射流轴线上液流浓度的影响最为明显。利用实验结果拟合了液流浓度的准则关系式,得到了无量纲坐标内液流浓度的变化规律,为获得最佳雾化效果的设计提供了参考。     

面对称重复使用运载器尾部喷流风洞试验

研究面对称重复使用运载器尾部发动机的喷流干扰特性对于飞行器设计具有重要意义。在中国航天空气动力技术研究院的FD-12风洞中开展了亚/跨声速飞行条件下的喷流试验。试验使用常温压缩空气作为喷流介质模拟发动机的高温燃气,采用的相似参数包括：飞行器的几何外形尺寸、飞行器的飞行马赫数、发动机喷管的出口马赫数、发动机喷流与自由来流静压比。试验结果表明了发动机喷流对全飞行器气动特性和体襟翼铰链力矩的影响随来流马赫数、喷管、体襟翼偏角等因素的变化规律。     

改型对剑形深波谷交变波瓣喷管射流掺混的作用

结合现有交变波瓣喷管的特点对基准波瓣喷管进行处理,设计了一种新型交变波瓣喷管——剑形深波谷交变波瓣喷管.采用数值方法研究了扇形处理和斜切处理对剑形深波谷交变波瓣喷管射流掺混的作用.结果显示,随着扇形处理和斜切处理各自改型程度的增加,波峰尾流区掺混速度变快,而核心区主流完全掺混所需距离略有增加.斜切处理促进掺混能力优于扇形处理,扇形处理后引射能力和流动损失基本不变,斜切处理后引射能力和流动损失稍有减小.计算结果还表明流向涡的形态对掺混效率的影响大于流向涡的强弱.     

Numerical investigation of the nonreacting and reacting flow fields in a transverse gaseous injection channel with different species

The mixing and combustion process has an important impact on the engineering realization of the scramjet engine. The nonreacting and reacting flow fields in a transverse injection channel have been investigated numerically, and the predicted results have been compared with the available experimental data in the open literature, the wall pressure distributions, the separation length, as well as the penetration height. Further, the influences of the molecular weight of the fuel and the jet-to-crossflow pressure ratio on the wall pressure distribution have been studied. The obtained results show that the predicted results show reasonable agreement with the experimental data, and the variable trends of the penetration height and the separation distance are almost the same as those obtained in the experiment. The vapor pressure model is suitable to fit the relationship between the penetration height, the separation distance and the jet-to-crossflow pressure ratio. The combustion process mainly occurs upstream of the injection port, and it makes a great difference to the wall pressure distribution upstream of the injection port, especially when the jet-to-crossflow pressure ratio is large enough, namely 17.72 and 25.15 in the range considered in the current study. For hydrogen, the combustion downstream of the injection port occurs more intensively, and this may be induced by its smaller molecular weight.     

Effects of a hot jet on detonation initiation and propagation in supersonic combustible mixtures

The effects of a hot jet on detonation initiation and propagation in supersonic combustible mixtures has been studied with two-dimensional numerical simulations with the open-source program AMROC that uses a block-structured adaptive mesh refinement method. Results indicate that the hot jet could ignite the detonation effectively in supersonic combustible mixtures like a pneumatic ramp. After the realization of the detonation initiation, the hot jet can still play an important role on the detonation propagation during its continuous ejection. For a hot jet with certain diameter, it can result in an overdriven detonation with almost constant overdrive degree. After the shutdown of the hot jet, the stable CJ detonation combustion was realized finally in the supersonic combustible mixtures. With the re-ejection of the hot jet, the failed detonation could be reinitiated quickly. Through the control of the re-ejection of the hot jet, it plays a key role not only in the initiation process, but also in the subsequent continuous detonation combustion period.