静电场对轴对称射流雾化效果的影响

设计和组装一台实验装置,研究了柴油通过压缩空气进行喷射时,静电场对轴对称射流液体的浓度分布影响。结果表明：在无电场作用时,随着靶盘距喷嘴距离的增加,液流浓度逐渐减小;当喷雾压力增加时,射流轴线上的液流浓度变化较大;随着距轴心线距离的增加,液流浓度的变化逐渐趋于平缓,最后基本达到稳定。在静电场作用时,随着电场强度逐渐增大,液流的雾化分布与增加空气压力时液流的雾化分布具有基本相同的特点,电场强度对射流轴线上液流浓度的影响最为明显。利用实验结果拟合了液流浓度的准则关系式,得到了无量纲坐标内液流浓度的变化规律,为获得最佳雾化效果的设计提供了参考。     

面对称重复使用运载器尾部喷流风洞试验

研究面对称重复使用运载器尾部发动机的喷流干扰特性对于飞行器设计具有重要意义。在中国航天空气动力技术研究院的FD-12风洞中开展了亚/跨声速飞行条件下的喷流试验。试验使用常温压缩空气作为喷流介质模拟发动机的高温燃气,采用的相似参数包括：飞行器的几何外形尺寸、飞行器的飞行马赫数、发动机喷管的出口马赫数、发动机喷流与自由来流静压比。试验结果表明了发动机喷流对全飞行器气动特性和体襟翼铰链力矩的影响随来流马赫数、喷管、体襟翼偏角等因素的变化规律。     

改型对剑形深波谷交变波瓣喷管射流掺混的作用

结合现有交变波瓣喷管的特点对基准波瓣喷管进行处理,设计了一种新型交变波瓣喷管——剑形深波谷交变波瓣喷管.采用数值方法研究了扇形处理和斜切处理对剑形深波谷交变波瓣喷管射流掺混的作用.结果显示,随着扇形处理和斜切处理各自改型程度的增加,波峰尾流区掺混速度变快,而核心区主流完全掺混所需距离略有增加.斜切处理促进掺混能力优于扇形处理,扇形处理后引射能力和流动损失基本不变,斜切处理后引射能力和流动损失稍有减小.计算结果还表明流向涡的形态对掺混效率的影响大于流向涡的强弱.     

Numerical investigation of the nonreacting and reacting flow fields in a transverse gaseous injection channel with different species

The mixing and combustion process has an important impact on the engineering realization of the scramjet engine. The nonreacting and reacting flow fields in a transverse injection channel have been investigated numerically, and the predicted results have been compared with the available experimental data in the open literature, the wall pressure distributions, the separation length, as well as the penetration height. Further, the influences of the molecular weight of the fuel and the jet-to-crossflow pressure ratio on the wall pressure distribution have been studied. The obtained results show that the predicted results show reasonable agreement with the experimental data, and the variable trends of the penetration height and the separation distance are almost the same as those obtained in the experiment. The vapor pressure model is suitable to fit the relationship between the penetration height, the separation distance and the jet-to-crossflow pressure ratio. The combustion process mainly occurs upstream of the injection port, and it makes a great difference to the wall pressure distribution upstream of the injection port, especially when the jet-to-crossflow pressure ratio is large enough, namely 17.72 and 25.15 in the range considered in the current study. For hydrogen, the combustion downstream of the injection port occurs more intensively, and this may be induced by its smaller molecular weight.     

Effects of a hot jet on detonation initiation and propagation in supersonic combustible mixtures

The effects of a hot jet on detonation initiation and propagation in supersonic combustible mixtures has been studied with two-dimensional numerical simulations with the open-source program AMROC that uses a block-structured adaptive mesh refinement method. Results indicate that the hot jet could ignite the detonation effectively in supersonic combustible mixtures like a pneumatic ramp. After the realization of the detonation initiation, the hot jet can still play an important role on the detonation propagation during its continuous ejection. For a hot jet with certain diameter, it can result in an overdriven detonation with almost constant overdrive degree. After the shutdown of the hot jet, the stable CJ detonation combustion was realized finally in the supersonic combustible mixtures. With the re-ejection of the hot jet, the failed detonation could be reinitiated quickly. Through the control of the re-ejection of the hot jet, it plays a key role not only in the initiation process, but also in the subsequent continuous detonation combustion period.     

燃气源控制气流非稳态耦合传热问题研究(Ⅰ)--计算模型和方法

针对某燃气源控制气流与导热套环之间的非稳态耦合传热问题,建立了数学模型,并采用整体求解的方法进行求解,即把流体区域的流动和对流换热与固体区域的导热过程组合起来,作为一个统一换热过程来处理。为确保计算结果在物理上的真实性,采用“假密度”法求解以温度T为求解变量的能量方程。对于非稳态控制方程离散后的离散方程采用了PISO方法进行求解。     

增强立尾效益的主动流动控制

本文叙述和讨论了某些增强立尾效益的主动流动控制（AFC）技术的研究。在NASA ERA项目支持下Rensselaer学院完成了4%和5%缩比立尾模型的合成射流AFC风洞试验,加州理工学院完成了14%缩比立尾模型的振荡射流AFC风洞试验,后者表明当动量系数为1.7%时可获50%的侧向力增量。基于将上述两种AFC技术集成于飞机系统的可行性研究,Boeing在Ames NFAC（40 ft×80 ft风洞）完成了B-757全尺寸立尾风洞模型试验,在风速为100 knots,方向舵偏角为30°和侧滑角为0°与-7.5°下,得出采用31个振荡射流激振器可获得20%侧向力增量。NASA ERA项目组与Boeing共同努力在2015年春实现了装有31个振荡射流激振器的B-757 ecoDemonstrator飞行试验。飞行员反馈和13%~16%侧向力增量的飞行试验初步分析结果表明了振荡射流AFC技术的成功。     

Experimental characteristics of a two-electrode plasma synthetic jet actuator array in serial

Plasma Synthetic Jet (PSJ) actuators have shown wide and promising application prospects in high-speed flow control, due to their advantages including high exhaust speed, wide frequency band, rapid response, and non-moving components. Although previous studies on PSJ actuators are abundant, most of them have focused on the performance of a single actuator. However, in practice, an actuator array is very necessary for large-scale aerodynamic actuation on account of the small affected area of a single PSJ. In this paper, the characteristics of a two-electrode plasma synthetic jet actuator array in serial are investigated experimentally. Compared to a parallel actuator array, the serial actuator array requires simpler power supply design and is much easier to realize. High-speed photography of the discharge evolution, voltage-current measurement, and shadowgraphy visualization are used in the investigation. Experimental results show that, for the serial actuator array, weak discharges happen firstly between energized and suspending electrodes, and then a strong pulse arc discharge is triggered. The breakdown voltage in serial is irrelevant to such factors as the number of actuators, the maximum or minimum gap in serial, the connection sequence, etc. It is mainly determined by the sum of gaps. For serial actuators with the same anode-to-cathode spacing, the energy deposition is the same, and the jet is synchronous and similar. Because of the entrainment and merging of adjacent jet vortices, the jet front speed of an aligned synchronous jet array increases as the orifice distance decreases. To achieve the highest jet front velocity, the orifice of the actuator has an optimal diameter.     

飞翼布局飞行器航向射流控制方案优化

由于飞翼布局飞行器取消了垂尾,其航向控制困难。为辅助和优化航向控制,基于射流控制技术设计了多种激励方案。设计并制作了航向射流控制激励器,通过风洞测力实验和二维数值模拟,对各方案的控制效果和作用机理进行分析,并选取出最优控制方案。研究结果表明:相同射流动量系数下,产生阻力比施加推力更容易获得偏航力矩。当激励开启后,射流包含与来流相逆的分量越多,与来流作用越明显,形成的分离区越大,控制效果越好。其中前对称吹气为最优控制方案,可以产生约70°阻力舵偏转效果,且力矩耦合程度较小。      

液环泵叶轮叶片轴向叶顶间隙微射流流动机理及性能分析

液环泵的轴向间隙泄漏流对其水力性能有重要的影响,为了抑制其叶片轴向叶顶间隙泄漏流动,提升水力性能,以2BEA-203型液环泵为研究对象,在叶片轴端间隙引入微射流,采用数值模拟方法对比分析微射流对间隙泄漏流场及液环泵性能的影响机理。分析结果表明:轴向间隙射流能够有效地抑制间隙泄漏,液环泵的效率及真空度均在一定范围内提升。叶片轴向间隙内射流孔出口处会形成一相对高压区,微射流排挤占用一部分间隙的流道,部分射流与压力面泄漏流相互作用形成间隙涡,阻滞泄漏流动,使得叶片间隙泄漏流强度降低,叶片背面后方的泄漏涡前移。液环泵叶轮轴向间隙泄漏流存在复杂的时空分布特征,湍动能分布由吸气区沿叶旋方向逐渐增强,受微射流抑制作用,射流型叶轮间隙吸力面侧的湍动能强度要明显弱于原型叶轮间隙;泄漏流强度沿弦线方向逐渐减弱,微射流的部分流体沿弦线方向流入叶片轴向间隙,排挤占用下游间隙的流道,提升了叶顶间隙的密封性能。