加力燃烧室壁温测量试验研究

加力燃烧室燃烧段的壁温对飞机和发动机的安全关系重大,单靠数值计算是很不够的,目前主要靠测试取得。燃烧段通常是双层壁,加风罩则为三层。本文介绍了内外壁和风罩的温度测量方法及其试验研究。该方法对加力燃烧室的研制具有重要意义,无论是对于新机还是批生产发动机都有重要的参考价值。     

Theoretical modeling of vectoring dual synthetic jet based on regression analysis

The excellent vectoring characteristic of Dual Synthetic Jet (DSJ) provides a new control strategy for the active flow control, such as thrust vectoring control, large area cooling, separated flow control and so on. For incompressible flow, the influence relation of source variables, such as structure parameters of actuators, driving parameters and material attributes of piezoelectric vibrating diaphragm, on the vectoring DSJ and a theoretical model are established based on theoretical and regression analysis, which are all verified by numerical simulations. The two synthetic jets can be deemed as a main flow with a higher jet velocity and a disturbing flow with a lower jet velocity. The results indicate that the influence factors contain the low-pressure area formed at the exit of the disturbing flow, which could promote the vectoring deflection, and the impact effect of the disturbing flow and the suppressive effect of the main flow with the effect of restraining the vectoring deflection. The vectoring angle is a complex parameter coupled by all source variables. The detailed theoretical model, whose error is controlled within 3.6 degrees, can be used to quantitatively assess the vectoring feature of DSJ and thus to provide a guidance for designing the control law applied in the active flow control.     

极端低温下电液伺服阀温漂特性分析

针对电液伺服阀在极端低温下温漂大的问题，以＋40℃时电液伺服阀初始零偏为基准，采用线性回归方法分析了某型射流管伺服阀不同温度的零偏试验数据，得到了极端低温下的伺服阀温漂与＋40℃时初始零偏的数学关系。分析与试验结果表明：极端低温时射流管伺服阀的温漂与＋40℃时的初始零偏存在非常显著的线性关系。温漂与电液伺服阀制造与装配工艺过程密切相关，与结构及其装配不对称有关。电液伺服阀结构上的微观不对称现象，在极端低温下显现出来，尤其是呈现出较大的温漂。降低温漂的主要措施是提高电液伺服阀结构与装配的对称性，降低初始零偏。     

非平衡电弧加热射流光谱学诊断方法：第一部分 氩射流

从一般意义上给出了非平衡电弧加热射流光谱学诊断方法和结果。表明非平衡亚声速电弧加热射流中心是ＬＴＥ的，沿径向形成一非平衡囊兜，囊兜的最深位置约在１／２射流半径处。     

U型脉冲爆震燃烧室的点火起爆工作特性试验研究

为了缩短脉冲爆震燃烧室轴向长度,开展了气液两相U型脉冲爆震燃烧室（U-PDC）点火起爆特性试验研究。试验时采用火花塞点火和热射流点火,且点火能量可调。研究结果表明,两种点火方式均可实现U-PDC工作频率10~30Hz稳定工作,且DDT时间随工作频率提高而缩短,在5~11ms之间。此外,实现U-PDC稳定工作时,热射流所需的点火能量为0.05J较火花塞点火能量1J更低,并且热射流点火DDT距离更短,约718mm,起爆位置距来流入口的轴向距离约280mm,缩短了起爆所需的轴向长度,有利于工程应用。但是,进一步提高热射流点火能量,其DDT距离无明显变化。     

弹体超声速绕流与底喷流干扰流场的数值模拟

利用ＴＶＤ有限体积格式数值模拟了弹体超声速绕流与底喷注相互干扰的复杂流场。采用四步Ｒｕｎｇ－Ｋｕｔｔａ时间推进多步法及“冻结粘性”技术,加速了迭代收敛,节省了计算机时。     

顺逆流向喷流干扰下二体分离气动力风洞实验研究及前体轴向力特性

本文概述了具有顺，逆流向喷流干扰的二体分离气动力风洞实验技术研究。对有喷流干扰引起的前体轴向气动力特性，作了简单的介绍。最后对有顺、逆流向喷流干扰的前体底部流动模型作了定性的描绘，可供理论研究时参考。     

Numerical investigation on flow field characteristics of dual synthetic cold/hot jets using POD and DMD methods

In order to improve the control ability of synthetic jets in compressible boundary layer, a novel control method based on dual synthetic cold/hot jets coupled control of velocity profile and temperature profile was proposed. As fundamental investigations on the effects of synthetic jet temperature on the jet behavior and flow field characteristics were essentially necessary, preliminary numerical simulations were conducted to study the influence of temperature (200 K and 400 K) on the flow field characteristics of synthetic jets using Large Eddy Simulations (LES) model. Time-averaged flow fields showed that different temperatures led to variable behavior of two strands of jets. For dual synthetic cold jets, a potential-core arose apparently with its height ranging from 0.01 to 0.03 m, while for dual synthetic hot jets, two strands of jets emerged downstream. The modal decomposition of instantaneous flow fields had been done using both Proper Orthogonal Decomposition (POD) and Dynamic Mode Decomposition (DMD). Various modes showed different characteristics of the flow fields. As the POD method focuses on the energy of flow while the DMD method focuses on the frequency, the first two modes had many similarities, but the third and fourth modes demonstrated completely different vortex structures. The current researches play a role of preliminary investigations for further and comprehensive exploration of novel flow control measures in global velocity field.     

PIV 技术测量振荡射流流场

利用以大功率双脉冲激光器为光源的ＰＩＶ技术，测定了由扁平射流和尖劈组成的二维振荡射流流场。实验结果表明，射流喷嘴与尖劈之间存在交错的、旋转方向相反的涡街，从而在尖劈两侧形成压力扰动。这种压力扰动波与不稳定射流的相互作用是整个系统产生流体振荡的原因。此外，还分析了射流喷嘴与尖劈之间的距离对流场的影响规律。     

强迫扰动下的射流撞击雾化特性

为全面把握撞击式喷嘴的工作特性，进一步认识雾化在燃烧不稳定中所起的作用，采用试验结合数值模拟的方法开展了强迫扰动条件下撞击式喷嘴的非稳态雾化特性研究。试验方面，采用水力扰动装置产生喷前压力扰动，由脉动压力传感器记录喷前的脉动压力，由高速摄影对动态的喷雾场进行背光拍摄。数值模拟则是基于开源程序Gerris开展，通过给定周期性变化的速度入口来模拟前端压力扰动下的撞击雾化过程。首先验证了建立的数值模拟方案处理非稳态雾化的有效性，其次将自然雾化与强迫扰动雾化进行对比，分析了强迫扰动条件下的撞击雾化特性，最后研究了扰动频率与扰动幅值对于撞击雾化的影响。结果表明：强迫扰动下的射流撞击喷雾场出现了弓形液滴群局部聚集的现象，并且在时间上表现出周期性特征，雾化频率与强迫扰动的频率一致。在研究的频率范围（1 257~3 563 Hz）内，撞击式喷嘴的雾化对扰动都有响应。扰动频率主要影响相邻弓形液滴群之间的间距以及雾场与扰动压力之间的相位关系，扰动幅值则主要影响雾化Klystron效应的强度。随着扰动幅值的增大，液膜的破碎长度减小，撞击点下游的流量特性由线性向非线性转变，由正弦波形转变为陡峭前缘波形。