Precise coseismic displacements from the GPS variometric approach using different precise products: Application to the 2008 MW 7.9 Wenchuan earthquake

The Global Positioning System (GPS) variometric approach has emerged as an attractive alternative to traditional well-developed positioning techniques including relative positioning and precise point positioning. Previous studies have demonstrated the capability of the variometric approach to retrieve coseismic displacements at centimeter-level precision, in a real-time manner using only readily available broadcast ephemeris. This study presents the first results comparing the performance of the variometric approach by using a variety of precise satellite orbit and clock products. Totally six kinds of products are included in our evaluation, namely the broadcast, IGS (International GNSS Service) ultra-rapid (predicted), ultra-rapid (observed), rapid, final (30-s clock) and CODE (Center for Orbit Determination in Europe) final (5-s clock) products. Static and dynamic experiments are conducted using 1-Hz GPS data covering a relatively large area in China during the 2008 Wenchuan M_W 7.9 earthquake. After removing the linear trend, the displacements using broadcast, ultra-rapid (predicted), ultra-rapid (observed) and rapid products reach nearly equivalent precisions at centimeter level. By using final and CODE final products, the precision of displacements can be significantly improved from 1.9–2.0 cm to 0.4–0.7 cm horizontally, and from 6.0–6.2 cm to 1.0–1.7 cm vertically for the dynamic experiments. The displacements using the CODE final products achieve the best precision, improved by more than 40% compared to those using the IGS final products. With the availability of IGS high-rate real-time precise products, this approach is promising to capture coseismic displacements more precisely in real time, which is crucial for earthquake and tsunami early warning.     

Spatial modeling of flood probability using geo-environmental variables and machine learning models,case study: Tajan watershed,Iran

The main objective of this study was to produce flood susceptibility maps for Tajan watershed, Sari, Iran using three machine learning (ML) models including Self-Organization Map (SOM), Radial Basis Function Neural Network (RBFNN), and Multi-layers Perceptron (MLP). To reach such a goal, different physical-geographical factors (criteria) were integrated and mapped. 212 flood inventory map was randomly divided into training and testing datasets, where 148 flood locations (70%) were used for training and the remaining 64 locations (30%) were employed for testing. Model validation was performed using several statistical indices and the area under the curve (AUC). The results of the correlation matrix showed, three factors slope (0.277), distance from river (0.263), and altitude (0.223) were the most important factors affecting flood. The accuracy evaluation of the flood susceptibility maps through the AUC method and K-index shows that in the validation phase RBFNN (AUC = 0.90) outperform the MLP (AUC = 0.839) and SOM (AUC = 0.882) models. The highest percentage flood susceptibility of the area in MLP, SOM and RBFNN models is related to moderate (28.7%), very low (40%) and low (37%), respectively. Also, the validation results of the models using the Relative Flood Density (RFD) approach showed that very high class had the highest RFD value.     

舰载倾转旋翼机着舰域耦合流场数值模拟研究

倾转旋翼机是当前旋翼飞行器研究的热点,但有关舰载倾转旋翼机着舰域耦合流场的研究还很少。以两栖攻击舰(LHA)和V-22"鱼鹰"倾转旋翼机为研究对象,基于雷诺平均Navier-Stokes(RANS)方程和SST k-ω湍流模型对舰载倾转旋翼机着舰域耦合流场进行数值模拟研究,并探讨了不同着舰高度时机/舰耦合流场的相互作用。结果表明:倾转旋翼尾流会与舰船脱落涡、甲板舷涡以及舰岛艉涡发生较强的"涡-涡干扰"现象,加大了耦合流场的湍流强度;舰船流场的低频非稳态特征会导致旋翼桨盘气动载荷发生显著的波动,不利于飞行操纵;垂直降落过程中,舰船甲板会形成"前低后高"的压力分布特征,倾转旋翼RMS气动载荷值也会明显增加,降低了着舰安全性,且右旋翼RMS气动载荷值比左旋翼平均大一倍以上,这也表明右旋翼面临着更加严峻的气动环境。     

国外舰载飞机着舰进近适配性评估技术研究

通过对国外舰载飞机在着舰进近下滑中的操纵需求分析,提出舰载飞机着舰进近适配性的评估要求。在评估要求的基础上针对飞机在进近适配性方面相关的特性给出相应的飞行试验方法和分析方法,初步建立舰载飞机着舰进近适配性评估技术和方法。     

轮胎参数对双轮式起落架刹车耦合振动影响研究

目前对飞机起落架低频刹车耦合振动问题的研究主要停留在考虑轮胎参数影响的起落架纵向单自由度振动特性分析，对于多自由度低频刹车耦合振动的特性研究不足。基于Simcenter 3D 动力学分析软件建立双轮支柱式起落架刚柔耦合整机滑跑刹车分析模型，研究轮胎竖向刚度和侧偏刚度对双轮支柱式起落架低频刹车纵向、横向和扭转的多自由度耦合振动的影响。结果表明：轮胎的竖向刚度对起落架横向和扭转方向上的振动影响较大，轮胎竖向刚度变化33%，横向和扭转方向上的振动变化5% 左右；轮胎的侧偏刚度对起落架低频刹车横向上的振动影响较大，轮胎侧偏刚度变化33%，横向上的振动变化15% 左右。     

On the modular approach of a 3D model of the system magnetosheath–magnetosphere

This article presents some preliminary features of a new self consistent model of the system magnetosheath–magnetosphere, recently developed in the Institute of Mechanics, Sofia, Bulgaria. The flow in the magnetosheath is governed by 3D ideal gas-dynamic equations. The positions and the shapes of the bow shock and the magnetopause are calculated iteratively as a part of the solution. These surfaces are essentially three-dimensional (generally non-axially-symmetric). The self-consistency between the regions is ensured via the boundary conditions. The magnetopause cusp indentations are formed, influencing essentially the magnetosheath flow. Prediction of the position and the shape of the bow shock for different values of the sonic Mach number are derived. Distribution of some flow parameters in the magnetosheath is presented. 3D numerical finite element model, calculating the field due to the magnetopause currents for an arbitrary magnetopause geometry, is used in the magnetosphere. The fields due to the current systems inside the magnetosphere(cross-tail current, ring current, and Birkeland current) are taken from the Tsyganenko empirical model. The magnetopause surface is calculated from the requirement the outside gas-dynamic pressure to be balanced by the magnetic pressure inside. The magnetosphere model can be viewed as an improved version of the empirical model but with more realistic magnetopause form and shielding field. Not a final but a beta version is used in this approach. The final model version as well the model details will be presented elsewhere.     

基于流场/声爆耦合伴随方程的超声速公务机声爆优化

基于自主研发的大规模并行结构化网格CFD求解器PMB3D以及并行化伴随方程求解器PADJ3D，开展了流场/声爆伴随方程的求解研究。首先采用标准算例，对内部CFD代码PMB3D软件和声爆预测代码进行了声爆计算可信度验证，以及声爆强度对近场声压梯度的校核。针对并行环境下多块对接网格的近场声压提取操作的复杂性，提出了"包围盒"的方法实现并行环境下近场声压装配单元编号、网格块编号以及对应的进程编号确定，基于声爆计算坐标将并行传递的数据进行一维排序，为声爆预测、伴随方程以及梯度求解提供输入条件。通过线性插值雅克比矩阵实现均匀坐标系梯度信息向非均匀坐标转换，并进一步根据结构化网格特征提出了插值原则，简化了近场声压转换雅克比矩阵的变分。通过装配单元记录，实现声爆强度对流场守恒变量的变分结果向各个进程装配，将装配结果作为流场伴随方程的右端项实现流场声爆耦合伴随方程的求解。此外，对小型超声速公务机开展了声爆优化，对比分析了设计前后的声压及其频谱特性。     

大迎角耦合运动非定常空气动力特性

采用某飞机大迎角大振幅运动风洞实验结果，分析了大迎角非定常空气动力的一些特性。结果表明，飞机机动飞行时多自由度运动的气动特性比单自由度运动复杂，耦合运动时的气动特性和两个单自由度运动的气动特性的叠加结果相比有一定差别。此外，旋转天平实验结果同本实验的结果相比差别较大。     

论建设学习型党组织的必要性与方法途径

建设学习型党组织是党的十七届四中全会提出的重大任务和党建的战略举措。本文阐述了建设学习型党组织的重要性和紧迫性,从六个方面剖析了建设学习型党组织的内涵,并提出了建设学习型党组织的方法和途径。     

翼-身组合体跨音速守恒型全位势流AF2高效算法的应用

 本文用Joukowski交换将圆截面机身的每一横截面逐一转绘为垂直切缝,因而将翼-身组合体转绘为某单独机翼。我们用作者采用过的数值保角转绘法对转换的单独机翼生成O型贴体坐标网格,然后用逆转绘构造翼-身组合体绕流的O型贴体坐标网格。跨音速计算采用守恒型金位势方程,精确边界条件和AF2高效有限差分迭代算法。本文指出,只需少量修改,就可将单独翼分析程序扩展为可同时适用于翼-身组合体。本文考虑的组合体其机身为有限或无限长,圆形截面,机翼前后机身轴线允许弯曲;机翼有任意平面形状,但翼尖弦长不能太短。