火箭基组合循环(RBCC)推进系统研究现状

对火箭基组合循环(RBCC)推进系统基本概念进行了介绍，并就此项技术在美国的研究现状做了比较详细的综述，指出了发展这种新型推进装置的关键技术，对国内在这方面的研究思路提出了建议。     

捷联惯性航姿系统中的模糊内阻尼算法研究

舒勒周期振荡和傅科周期振荡会影响捷联惯性航姿系统的精度。本文将传统的平台内阻尼的思想引入到捷联惯性航姿系统中，通过设计水平回路中的三阶内阻尼网路，利用系统本身的速度信息来阻尼周期振荡。由于改变了舒拉调整条件，内阻尼算法只有在系统加速度较小的情况下才能使用。文中根据模糊理论对三轴加速度计的输出分析系统运动状态，判别是否能够使用内阻尼网路。仿真和实验证明，模糊内阻尼算法明显抑制了舒勒周期振荡和傅科周期振荡，有效提高了捷联惯性航姿系统精度。     

用最优轨迹分析法研究战斗机的敏捷性

利用最优轨迹分析法确定战斗机的敏捷性，并将最优控制问题转换为参数优化问题，由非线性数学规划理论解出参数变化规律。从典型示例飞机分析了不同迎角限制和推力下的控制策略及对功能敏捷性的影响。仿真结果表明，在转弯过程中适当放宽迎角限制和增加推力都能增大转弯速率，缩短转弯时间，从而改善飞机的功能敏捷性。     

Simulated microgravity inhibits the proliferation of K562 erythroleukemia cells but does not result in apoptosis

Astronauts and experimental animals in space develop the anemia of space flight, but the underlying mechanisms are still unclear. In this study, the impact of simulated microgravity on proliferation, cell death, cell cycle progress and cytoskeleton of erythroid progenitor-like K562 leukemia cells was observed. K562 cells were cultured in NASA Rotary Cell Culture System (RCCS) that was used to simulate microgravity (at 15 rpm). After culture for 24 h, 48 h, 72 h, and 96 h, the cell densities cultured in RCCS were only 55.5%, 54.3%, 67.2% and 66.4% of the flask-cultured control cells, respectively. The percentages of trypan blue-stained dead cells and the percentages of apoptotic cells demonstrated no difference between RCCS-cultured cells and flask-cultured cells at every time points (from 12 h to 96 h). Compared with flask-cultured cells, RCCS culture induced an accumulation of cell number at S phase concomitant with a decrease at G0/G1 and G2/M phases at 12 h. But 12 h later (from 24 h to 60 h), the distribution of cell cycle phases in RCCS-cultured cells became no difference compared to flask-cultured cells. Consistent with the changes of cell cycle distribution, the levels of intercellular cyclins in RCCS-cultured cells changed at 12 h, including a decrease in cyclin A, and the increasing in cyclin B, D1 and E, and then (from 24 h to 36 h) began to restore to control levels. After RCCS culture for 12–36 h, the microfilaments showed uneven and clustered distribution, and the microtubules were highly disorganized. These results indicated that RCCS-simulated microgravity could induce a transient inhibition of proliferation, but not result in apoptosis, which could involve in the development of space flight anemia. K562 cells could be a useful model to research the effects of microgravity on differentiation and proliferation of hematopoietic cells.     

导引系统环境应力筛选设计

依据环境应力筛选的基本特征,结合某型炸弹导引系统的结构特点,制定了产品的初始环境应力筛选方案.通过产品的设计定型试验,验证了最终的环境应力筛选方案是行之有效的.     

CFRP超高周疲劳损伤演化过程

碳纤维增强树脂基复合材料（CFRP）在航空航天等领域得到广泛应用，CFRP构件的超高周疲劳问题逐渐凸显出来。本文采用超声三点弯曲疲劳试验系统对CFRP复合材料的损伤演化过程进行研究。结果表明：CFRP复合材料在超高周三点弯曲加载下的S-N曲线呈阶梯状，尤其在10⁸周次后，其疲劳强度明显下降。通过对CFRP复合材料在同一视场不同周次下的损伤过程进行分析，发现该材料在超高周加载下的损伤形貌主要表现为3种特征：纤维束交叉处基体损坏、近纤维束平行段基体空洞、基体贯穿，并随着加载周次的增加，其损伤过程也按照这3种特征依次呈现出来。     

Helioseismology and the solar cycle

Helioseismic measurements stretching back for about three decades have clearly shown that the acoustic modes are sensitive to solar-cycle changes. 2006 marks the first full 11-year cycle of continuous observations from the Global Oscillation Network Group (GONG), and 10 years of observations with the Michelson Doppler Imager (MDI) aboard the SOHO spacecraft. For the first time, global helioseismology has traced the migrating zonal flow pattern of the torsional oscillation deep within the convection zone, while local helioseismology has revealed the changing pattern of meridional flows over the cycle. The frequencies, lifetimes, and amplitudes of acoustic modes all show variations that closely track the surface distribution of magnetic activity and may provide insight into the excitation and damping of the oscillations. Efforts to trace magnetic field and sound speed or density changes in the solar interior have proved more challenging.     

不同温度下IC10合金的本构关系

 利用材料试验机（MTS809）测得IC10合金在很宽的温度范围（25~800 ℃）和不同应变率（10^-5~10^-2s^-1）内的应力 应变曲线。试验结果表明：室温下IC10合金的流变行为对应变率不太敏感;相同应变率（10^-4s^-1）下,流变行为对温度较敏感;在不同应变率、25~800 ℃温度范围内,IC10合金的屈服应力变化很小。基于试验数据,修正并拟合了Johnson-Cook方程,并利用该方程对不同温度和不同应变率下IC10合金的流变应力进行预测。与试验数据对比表明,修正后的Johnson-Cook方程能较好地描述IC10合金在不同的温度和应变率条件下的流变行为。     

氢/氧气-气喷注器冷流掺混与燃烧比较的仿真研究

分别采用无化学反应的和带化学反应的湍流N-S方程描述发动机内流动过程,对气-气同轴剪切式单喷注器进行了冷流掺混和燃烧的仿真.其中化学反应速率由Arrhenius公式计算,采用9步详细反应动力学模型来描述氢氧反应.对典型冷流和燃烧仿真结果进行了比较,结果表明燃烧掺混速率明显小于冷流掺混速率;并对同轴喷注器关键参数对冷流和燃烧掺混的影响进行了仿真和分析比较,得到速度比、缩进量和喷注流量的影响是一致的,而喷注速度的影响是相反的.      

涡轮盘低循环疲劳的概率设计

基于涡轮盘结构的低循环疲劳设计流程,将概率设计理念融入设计过程中,提出了涡轮盘低循环疲劳的概率设计流程。首先进行涡轮盘结构的优化分析,其中以确定性设计准则作为约束条件;以优化结构方案为基础,考虑参数的随机性,对涡轮盘低循环疲劳进行可靠性分析;以低循环疲劳寿命的可靠度为概率设计准则,对涡轮盘进行反复的设计和计算验证,通过修改结构尺寸完成涡轮盘低循环疲劳的概率设计。同时,根据灵敏度分析结果,讨论了设计变量的分散性对涡轮盘寿命的影响,为进一步提高结构的可靠性提供了新的研究思路。结果表明,按照概率设计观点确定的涡轮盘结构兼顾性能和可靠性,在满足可靠度的前提下降低涡轮盘的重量。同时该概率设计流程简单方便,易于工程的推广应用。