未知空间目标纹理缺失表面三维重建算法

针对传统三维重建方法难以对纹理缺失表面进行完整重建的问题,提出一种基于深度学习与截断符号距离函数(TSDF)融合的未知目标三维表面完整重建算法。首先设计一种基于深度学习的图像逐像素深度估计框架,通过在训练过程中引入多个复杂结构模型,提高该深度估计框架的泛化能力;其次,利用TSDF对各帧图像所估计的深度信息进行融合,实现对纹理缺失区域的空间目标完整三维重建。根据仿真校验,对于300 mm尺寸的卫星模型图像,像素深度估计平均误差约为13 mm,通过TSDF融合后尺寸精度误差小于5.10%。实验结果表明该算法可以对未知空间目标光学图像进行逐像素深度估计,并获得目标完整的三维结构与纹理信息,有效解决无纹理区域的重建结构缺失问题。     

小波去除噪音算法研究

介绍了小波变换滤除噪音的机理和与傅立叶变换相比的优越性,其中包括确定性噪音和随机噪音。讨论了增强去噪效果的几种改进方案并提出一种试验估计去噪方法,对工程应用有一定的实用价值。     

Vision-based pose estimation for cooperative space objects

Imaging sensors are widely used in aerospace recently. In this paper, a vision-based approach for estimating the pose of cooperative space objects is proposed. We learn generative model for each space object based on homeomorphic manifold analysis. Conceptual manifold is used to represent pose variation of captured images of the object in visual space, and nonlinear functions mapping between conceptual manifold representation and visual inputs are learned. Given such learned model, we estimate the pose of a new image by minimizing a reconstruction error via a traversal procedure along the conceptual manifold. Experimental results on the simulated image dataset show that our approach is effective for 1D and 2D pose estimation.     

航天型号项目成本估算方法研究与实现

介绍了国内外航天型号研制项目成本估算的研究现状,分析了航天型号研制项目成本估算的作用与特点。研究了参数成本估算法、工程成本估算法、类比成本估算法、外推成本估算法、仿真模型法和综合成本估算法等方法。给出了用综合成本估算法估算的风云四号气象卫星研制成本算例。     

一种基于机动辨识预测的空空导弹导引律

现有的空空导弹导引头在有噪声和干扰的环境下获得目标精确信息存在时间延迟,且新一代目标的机动能力更强,不对导弹加以补偿会造成较大脱靶量,所以需对目标状态有效预测。针对新一代目标规避空空导弹常用的大机动模式,为满足新一代空空导弹发展需求,设计了一种新型复合导引律。从目标自身出发,研究高机动目标规避导弹采用的典型机动形式,对机动轨迹进行离线建模,构建具有扩展能力的目标机动模型库。设计自适应滤波器对测量噪声进行降噪。同时,利用模型库设计了机动辨识预测器,对目标实际机动进行在线辨识。基于在线辨识的结果对目标机动进行预测,并对时间延迟进行补偿和修正,实现对高机动目标的精确打击。仿真结果表明:该方法对不同类型的机动目标均有较高的预测精度和命中精度。     

电离层顶部电子含量对GNSS电离层层析的影响分析

卫星信号射线上的总电子含量(slant total electron content, STEC)是像素基全球卫星导航系统电离层层析(computerized ionospheric tomography, CIT)建模的必要数据来源，但电离层层析通常忽略1 000 km以上的顶部电子含量，为弄清这部分电子含量对层析结果的影响，利用NeQuick2模型计算站星视线上的STEC与其在电离层区域内的STEC比值来改正原始数据，并分别利用改正前后的STEC进行电离层层析。结果显示，电离层顶部电子含量占比约为10%，白天占比略大于黑夜，与测高仪站的数据相比，改正后的均方根值比改正前提高了20%以上；与Swarm卫星提供的电子剖面数据对比，改正后的层析结果精度较改正前提升了19.6%左右，且该方法受地磁扰动影响较为明显。总的来说，利用CIT进行小尺度电离层探测，可较直观地看出，顶部电子含量对层析结果的影响较大，需要采取相应手段予以剔除。     

基于DCT-CS的脉冲星周期超快速估计方法

受快速傅里叶变换（fast Fourier transform，FFT）的影响，基于FFT和压缩感知（compressive sensing, CS）的脉冲星周期快速估计算法的计算量大。为进一步减小计算量并提高计算精度，利用离散余弦变换（discrete cosine transform，DCT)取代FFT，提出了一种基于DCT-CS的脉冲星周期超快速估计算法。在该方法中，利用DCT提取脉冲星信号的低频部分构建低频DCT矩阵；构建畸变轮廓字典并获取累积轮廓；提出了利用最大值超分辨率稀疏恢复估计脉冲星周期的方法。仿真结果表明，DCT-CS的脉冲星周期估计精度达到了3.82×10-12 s，计算时间达到了9.31 ms。与FFT-CS相比，周期估计精度提高了约16%，计算时间缩短了约37.5%，实现了实时高精度的脉冲星周期估计。     

A systematic approach to nonlinear rotorcraft model identification

The development of a powerful parameter estimation routine and its integration into the simulation environment HOST is described. With this tool approaches are being made towards new strategies of mathematical modeling, aimed at providing highly accurate and nevertheless run-time efficient simulation models. The identification routine is capable of optimizing parameterized models in both dynamic time domain simulation and static (e.g. trim state variation) conditions. Examples of both cases are presented to emphasize the improvement in the system response prediction and to demonstrate the abilities of the identification techniques in combination with the nonlinear simulation platform. This article reviews the activities and achievements accomplished by the DLR Institute of Flight Research and the ONERA Systems Control and Flight Dynamics Department during the last few years in the research on rotorcraft flight dynamics modeling and model identification. Future activities that require extensive high fidelity modeling are in the scope of the current and coming modeling activities that include the use of the presented methods and software technologies.     

3-D position estimation of isolated target and optimal trajectory choice in parasitic synthetic aperture radar

Bistatic SAR (BSAR) systems have recently been the subject of several studies, but little attention has been given to the potential of the location of targets. In the paper, the performance of the estimation of 3-D position of a target (TPE) in parasitic SAR is obtained analytically and illustrated by computer simulation using ambiguity function analysis, and the maximum likelihood estimate (MLE) approach. It was shown that by using a multi look parasitic BSAR all three coordinates of an isolated point target (IPT) could be evaluated. Analytical closed form equations that characterize the measurement accuracy were derived. In the final these equations will be used to demonstrate various cases of more practical, including optimal trajectories choice under any geometry configuration case, moreover, the conclusion is verified via Matlab.     

基于偏最小二乘回归分析的装备研制费用估算方法及应用

介绍了寿命周期费用的概念以及各阶段分布情况;针对经典回归分析的不足,采用偏最小二乘回归分析对某装备样本数据进行分析建模;建立了研制费用与几个相关指标的回归方程,并将估算结果与经典的回归分析进行对比,验证模型的合理性。该模型能较好地反映了费用与各指标之间的关系,对后续寿命周期费用的分析与控制有一定的意义。