气体自发光在高超声速流场显示中的应用

提出了利用高焓气体自发光作为高超声速流场显示的方法,介绍了在使用高焓运行的激波风洞中,对二维模型的高超声速绕流流场使用此种方法的初步结果,可观察到二维棱形柱的尾流和马赫波的相交。结果表明此种方法不需外加光源,对于结构限制无法设置透明部件的模型,无疑是简单可行的。     

测定电离复合速率常数的激波管方法

发展了测定电离复合速率常数的一种新的激波管方法。在这一方法中使用反射激波加热预混气体使之电离,相继用可控制的强稀疏波使之快速冷却,冷却速度很快,可达106K/s, 使之在冷却过程中,电离远离平衡态。用压电传感器和Langmuir 探针监测状态变化历程和离子浓度,并可获得过程中所有的状态参数。测定了NO e 电离复合速率常数。实验表明这一方法简易可靠     

基于剪裁技术考虑的某冲击试验分析

利用环境工程剪裁技术对某冲击试验的结果进行分析,结果表明,按照引用标准评定为"超差"的试验,当考虑到试验件结构的特性并进行必要的数据转换后,试验结果是有效。首先分析造成超差的原因为天线组件的剩余响应,然后通过频域数字滤波进行数据转换。     

高超音速湍流分离激波结构不稳定性的实验研究

用铂膜电阻温度计测量了前向台阶诱导激波与湍流边界层相互作用流场中的表面热流率脉动。试验条件是:自由流马赫数为7.8,单位长度雷诺数为3.5×10~7米~(-1)。给出相互作用区平均热流率和脉动热流率分布。结果表明:在激波诱导的高超音速湍流分离流中,激波结构是不稳定的,产生一个间歇区域。在间歇区中,表面平均热流率由未扰动湍流边界层的热流信号和低频高幅热流脉动迭加而成,出现一个极大值。相互作用愈强,愈大,间歇区域愈长。     

在激波管中粒子阻力系数的实验研究

在激波管中用消光法测量了气固两相流动激波松弛区的粒子浓度。基于一维静止激波理论和理想“等效气体”模型,实验确定了粒子阻力系数。拟合实验结果,得到了阻力系数与粒子雷诺数之间的实验关系式:C_D=4300/Re~(1.57)。     

考虑粘性相互作用的跨音速机翼分析

本文将一些已有的三维全位势方程计算方法和一种三维积分边界层方法作了弱相互作用的耦合计算。计算了三种机翼并与已有的试验数据作了比较。     

Global Response of Martian Plasma Environment to an Interplanetary Structure: From Ena and Plasma Observations at Mars

As a part of the global plasma environment study of Mars and its response to the solar wind, we have analyzed a peculiar case of the subsolar energetic neutral atom (ENA) jet observed on June 7, 2004 by the Neutral Particle Detector (NPD) on board the Mars Express satellite. The “subsolar ENA jet” is generated by the interaction between the solar wind and the Martian exosphere, and is one of the most intense sources of ENA flux observed in the vicinity of Mars. On June 7, 2004 (orbit 485 of Mars Express), the NPD observed a very intense subsolar ENA jet, which then abruptly decreased within ∼10 sec followed by quasi-periodic (∼1 min) flux variations. Simultaneously, the plasma sensors detected a solar wind structure, which was most likely an interplanetary shock surface. The abrupt decrease of the ENA flux and the quasi-periodic flux variations can be understood in the framework of the global response of the Martian plasma obstacle to the interplanetary shock. The generation region of the subsolar ENA jet was pushed towards the planet by the interplanetary shock; and therefore, Mars Express went out of the ENA jet region. Associated global vibrations of the Martian plasma obstacle may have been the cause of the quasi-periodic flux variations of the ENA flux at the spacecraft location.     

Geoeffectivity of Coronal Mass Ejections

Coronal mass ejections and post-shock streams driven by them are the most efficient drivers of strong magnetospheric activity, magnetic storms. For this reason there is considerable interest in trying to make reliable forecasts for the effects of CMEs as much in advance as possible. To succeed this requires understanding of all aspects related to CMEs, starting from their emergence on the Sun to their propagation to the vicinity of the Earth and to effects within the magnetosphere. In this article we discuss some recent results on the geoeffectivity of different types of CME/shock structures. A particularly intriguing observation is that smoothly rotating magnetic fields within CMEs are most efficient in driving storm activity seen in the inner magnetosphere due to enhanced ring current, whereas the sheath regions between the shock and the ejecta tend to favour high-latitude activity.     

激光冲击残余应力场的有限元分析

建立模拟激光冲击残余应力场的非线性弹塑性有限元模型,预测AISI 304奥氏体不锈钢厚、薄靶材经激光冲击后表面以及内部的残余应力场分布.模拟过程中,考虑材料高应变率(106s-1)下的力学性能和激光诱导冲击波的精确加载,分析激光功率密度、激光光斑尺寸、激光脉宽、激光冲击次数、激光单面与双面冲击等激光冲击参数以及初始残余应力等因素对不锈钢靶材残余应力分布的影响.数值模拟结果与X射线衍射法测量值吻合较好.在有初始残余拉应力(250MPa)存在的情况下,激光冲击仍能使304奥氏体不锈钢靶材形成残余压应力层,说明激光冲击工艺可提高奥氏体不锈钢焊接构件的抗应力腐蚀开裂能力.     

冲击响应谱绝对校准研究中冲击响应谱的计算方法

介绍了应用于冲击响应谱绝对校准中的冲击响应谱的计算方法,该方法的实现基于MATLAB编程语言,即通过MATLAB中的仿真直接求解单自由度二阶微分方程的数值解以获得冲击响应谱的绝对复现.