Microstructure,thermophysical property and ablation behavior of high thermal conductivity carbon/carbon composites after heat-treatment

Uni-directional carbon/carbon composites with high thermal conductivity are suitable to supply continuous thermal protection for future reentry vehicles since they could reduce surface temperature and ablation rates simultaneously in harsh environments. In this work, the high thermal conductivity carbon/carbon composites were prepared by chemical vapor infiltration. After heat-treatment, both their open porosity and internal friction increase due to the fiber/matrix thermal expansion mismatch; while their thermal conductive performance become better due to more complete carbon structure. With raising heat-treatment temperature from 1800 °C to 2450 °C, the mass and linear ablation rates of C/C composites with fibers vertical to the oxyacetylene torch for 60 s decrease from 0.66 mg/s and 2.95 μm/s to 0.51 mg/s and 2.05 μm/s respectively. The improved ablation resistance is resulted from the increased thermal conductivity from 282 to 508 W/(m·K) and more carbon fibers exposed to the flame during ablation, which have better oxidation resistance than those of carbon matrix. While such ablation rates become larger for composites with fibers parallel to the flame, from 1.02 mg/s and 3.73 μm/s to 1.28 mg/s and 5.01 μm/s respectively since the ablation occurred more easily through gaps at the fiber/matrix interfaces, which become larger and are always exposed to the flame for this case.     

石英陶瓷与碳纤维增强复合材料间胶接增强的优化工艺

为提高硅橡胶胶黏剂胶接石英陶瓷和碳纤维增强复合材料的强度和耐温性能,研究了胶接面湿热状态、打磨程度、胶层厚度、操作等待时间等工艺参数对胶接强度的影响。在试片正常烘干、打磨的情况下,当胶层厚度为0.4 mm、操作等待时间小于0.5 h时,胶接效果最优,其压缩剪切强度达到了3.06 MPa。探索了底涂剂处理对胶接强度和耐温性能的影响。在温度不高于100℃时,底涂剂A的效果较好。经底涂剂A处理后,胶接试片常温下的强度提高了13.7%,达到3.48 MPa;100℃时的强度提升率达到37.7%。在更高温度下,底涂剂B的效果更为显著。经底涂剂B处理后,胶接试片常温下的强度提升了10.1%,达到3.37 MPa;300℃时的强度提升了44.0%,达到1.57 MPa;200℃时的强度提升率最高,为49.0%。测试结果为高温条件下石英陶瓷胶接结构的胶接工艺优化及其应用提供了参考。     

基于ANCF的松弛绳索动力学建模与仿真

传统绝对节点坐标方法(ANCF)绳索模型是基于梁单元建立的,其不能反映纤维绳索的不可抗压和松弛特性。考虑纤维绳索初始松弛余量,给出了绳索非线性轴向应力-应变关系。绳索在松弛状态下轴向力接近于零,在张紧状态下表现出线弹性特性。在此基础上,采用绝对节点坐标方法推导了松弛绳索动力学模型。通过静力学和动力学仿真,将传统绳索模型和松弛绳索模型进行对比,结果表明:在重力及不同集中载荷作用下,松弛绳索相比于传统绳索都具有更大的变形;分析移除集中载荷后绳索的动力学响应可知,传统绳索在振动过程中始终处于张紧状态,且绳索上各点振动同步,而松弛绳索会在张紧和松弛状态之间不断转换,绳索上各点的振动存在相位差,能够更好地反映绳索在松弛状态下的动力学特性。     

中介机构参与预算绩效评价问题研究——基于财政部门的问卷调查

推进中介机构参与预算绩效评价是我国预算绩效管理的重点内容,基于财政部门的问卷调查表明：该项工作尚处于起步阶段,需要财政部门、中介行业组织和中介机构等方面协同配合,通过完善评价规范,合理设计委托代理与付费机制,加强中介机构能力培育与资格管理,落实结果应用等促进中介机构参与预算绩效评价.     

FINITE DIFFERENCE MODEL FOR SIMULATION OF DENSIFYING CARBON-CARBON COMPOSITES BY CHEMICAL VAPOR INFILTRATIONP ROCESSES

ＮｏｍｅｎｃｌａｔｕｒｅｓＡ０—ｃｏｅｆｉｃｉｅｎｔｏｆｔｈｅＡｒｈｅｎｉｕｓｅｑｕａｔｉｏｎＣ（ｎ）—ｈｙｄｒｏｃａｒｂｏｎｃｏｎｃｅｎｔｒａｔｉｏｎｉｎｕｎｉｔ（ｎ）（ｍｏｌ／ｃｍ３）Ｃ０—ｈｙｄｒｏｃａｒｂｏｎｃｏｎｃｅｎｔｒａｔｉｏｎａｔｅｘ...     

旋转CVI制备陶瓷基复合材料碳界面层

用旋转ＣＶＩ工艺，通过优化工艺参数，在低压（５ｋＰａ）、高温（１１００℃）、高Ｃ３Ｈ６ 浓度（６２．５ｖｏｌ％ ）以及３．５ｍ ｍ ·ｍ ｉｎ－ １ 碳布旋转线速度条件下，在二维碳布上快速制备了厚度均匀（０．２５μｍ ）、表面规整的致密热解碳界面层。实验结果表明：沉积温度对界面层表面状况有较大的影响；采用减压法与优化沉积炉结构与几何尺寸，能有效防止高温高Ｃ３Ｈ６ 浓度下炭黑的形成。     

Fractal analysis of short and intermediate GRB and the fireball model

In the present work the possibility of the fractal analysis application for GRB temporal profiles was studied. We have analysed the 4B revised BATSE catalog: temporal profiles of GRB with t₉₀ < 3 s (287 short and 100 intermediate) were studied on TTE data, a sample of 278 intermediate GRB with t₉₀  3 s were studied on DISCSC data. An analysis of the background fractal dimension distributions obtained using TTE and DISCSC data (143 and 110 background regions, respectively), indicates that for both datasets background fractal dimensions D_bgr = 1.5 that the fractal dimension distributions obtained by using these data can be processed simultaneously. The change of the fractal index D_bgr for Poisson statistics – dominated sets with different coefficients of error in counting (up to 10) was studied and D_bgr = 1.5. The ranges of fractal dimension (0.80  D  2.25 for short and 0.85  D  2.01 for intermediate GRB) are shifted over range for theoretical fractal curve (1 < D < 2) due to the finite detector time resolution. There are four subgroups in fractal dimension distribution for short GRB (D = 1.05 ± 0.03, D = 1.31 ± 0.05, D = 1.51 ± 0.04, D = 1.90 ± 0.03) and six subgroups for intermediate one (D = 1.05 ± 0.09, D = 1.24 ± 0.08, D = 1.44 ± 0.07, D = 1.51 ± 0.08, D = 1.64 ± 0.07, D = 1.91 ± 0.1). Time profiles with fractal dimension smaller then background can be obtained by using models with many short chaotic processes in sources, for example, fireball model with shock waves. The range of fractal dimensions for the modelled temporal profiles is 1.213  D  1.400, which can correspond to subgroups of short and intermediate GRB with D = 1.31 and D = 1.24; moreover, the fractal dimension of a simulated indented event and GRB990208 are equal within the error limits for some model parameters and it is possible to obtain smooth temporal profiles with D = D_bgr.     

洛尔定理的推广和柯西中值定理的证明

本文对洛尔定理进行了推广，并给出了柯西中值定量的三种证法。     

凸肩(叶冠)接触面摩擦机理及参数测定的实验研究

凸肩(叶冠)叶片及其盘组件的振动特性、振动响应及其减振效果的理论分析和实验研究均需要准确确定其摩擦接触边界条件。通过从Oden非线性、非局部摩擦定律出发,分析了它的机理和运动规律,并用试验方法测定了这些参数。所得结果不仅可用于理论分析建模,还可直接应用于工程设计、实验研究和生产检验。     

固体推进剂体积模量主曲线试验研究

采用非接触测量体积模量系统，测出复合固体推进剂在不同温度下的体积驰模量和体积里面变柔量，并依据时间－温度等效原理迭加拟合求得了体积模量主曲线和温度移动固子的数学表达式，其结果要吧动机药柱结构整性化分析提供依据。