某型直升机超短波电台互相干扰的问题分析

某型直升机装备的两超短波电台在使用中出现某些频点下的互相干扰现象,尽管地面采取了相应措施却均未改善。本文在常规修理方法的基础上,采用了一些新方法找到了此故障的根源,并为类似电台干扰问题提供参考。     

顺逆流向喷流干扰下二体分离气动力风洞实验研究及前体轴向力特性

本文概述了具有顺，逆流向喷流干扰的二体分离气动力风洞实验技术研究。对有喷流干扰引起的前体轴向气动力特性，作了简单的介绍。最后对有顺、逆流向喷流干扰的前体底部流动模型作了定性的描绘，可供理论研究时参考。     

基于双相关峰检测的C/A码伪距精密估计

采用软件无线电技术和数字信号处理技术，直接对A／D变换后的中频信号进行处理，并得到C／A码的相关曲线。利用曲线拟合方法对相关峰波形进行拟合，进一步确定相关曲线的峰值点位置。同时基于双相关峰检测的伪距估计方法，精确求解C／A码伪距观测值。利用自编的仿真程序包，在Matlab中进行了相应的模拟计算。仿真结果表明当信噪比大于26dB时，可得到毫米数量级的伪距估计精度，能够满足GPS模拟源系统高精度自校的要求。     

用二次子结构法对过盈螺纹进行应力分析

针对过盈螺纹的疲劳寿命估算进行了工作,求解应力是寿命估算的第一步。为减少求解自由度,节省机时,提高效率,文章根据螺纹配合的特点,提出二次子结构法,消去内部节点,只留下配合点、加载点和边界约束点。 文章推导了子结构公式及过盈配合公式,给出了程序流程图及有限元计算结果,由结果可知,随过盈量增加,齿间应力差减小;而随过盈量增加,危险点相当应力增大。这些结果,对过盈量的选择也有参考价值。     

数字图像处理技术在表面划痕测量中的应用

为解决飞机座舱、机翼蒙皮表面划痕的准确测量问题,设计了一种基于数字图像处理技术的表面划痕测量系统。测量系统将物体表面划痕成像在CCD上,通过对划痕图像进行分割、变换、拟合等处理,最后得到划痕深度。这种方法较人眼瞄准方法减少了人员测量误差,提高了测量准确度和测量效率;通过对标准划痕的重复测量,实验标准差可达0.5μm,能够满足工程测量的需要。     

Computational study of wing deformation and sting interference effects with the CAE-AVM test case

A modern transonic computational fluid dynamics test case is described in this paper, which is the Aerodynamic Validation Model (AVM) from the Chinese Aeronautical Establishment (CAE). The CAE-AVM is a representation of a modern transonic business jet aircraft with a design Mach number of 0.85. Numerical simulations for the AVM are conducted for two geometries: one baseline geometry, and one geometry that includes the applied model support system of the wind tunnel as well as the deformed wing shape that occurred during wind tunnel testing. The combined influence of wing deformation and model support interference on local and integral aerodynamic features is presented. Comparisons between CFD and experimental results are made; reasons of discrepancy between results from considered cases are analyzed.     

小展弦比飞翼亚、跨、超声速支撑干扰研究

通过数值模拟方法研究了小展弦比飞翼标模在0.6、0.9、1.5三个典型马赫数下的支撑干扰特性,分别考虑了近场尾部外形局部畸变和尾支杆干扰及远场风洞中部支架干扰,并基于表面压力系数差异为准则尝试对近场干扰量进行分解。研究得到如下结论:马赫数0.6时,远场支撑阻力系数和俯仰力矩系数的干扰量约占总支撑干扰量的30%,升力系数约占20%;马赫数0.9、迎角2°时,阻力系数远场支撑干扰量占总支撑干扰量的40%,迎角18°时,远场支撑干扰使得涡破裂位置提前;马赫数1.5时,远场支撑干扰可以忽略;基于表面压力系数差异将支撑干扰量分解的方法在亚声速支撑干扰前传明显时不适用,在马赫数0.9、迎角2°时求得近场支撑干扰使得马赫数减小约0.02,迎角减小约0.1°,马赫数1.5时用此法求得马赫数和迎角的干扰量均约等于0。     

Reliability analysis of aero-engine blades considering nonlinear strength degeneration

To comprehensively consider the effects of strength degeneration and failure correlation, an improved stress-strength interference (SSI) model is proposed to analyze the reliability of aeroengine blades with the fatigue failure mode. Two types of TC4 alloy experiments are conducted for the study on the damage accumulation law. All the parameters in the nonlinear damage model are obtained by the tension-compression fatigue tests, and the accuracy of the nonlinear damage model is verified by the damage tests. The strength degeneration model is put forward on the basis of the Chaboche nonlinear damage theory and the Griffith fracture criterion, and determined by measuring the fatigue toughness during the tests. From the comparison of two kinds of degeneration models based on the Miner’s linear law and the nonlinear damage model respectively, the nonlinear model has a significant advantage on prediction accuracy especially in the later period of life. A time-dependent SSI reliability model is established. By computing the stress distribution using the finite element (FE) technique, the reliability of a single blade during the whole service life is obtained. Considering the failure correlation of components, a modified reliability model of aero-engine blades with common cause failure (CCF) is presented. It shows a closer and more reasonable process with the actual working condition. The improved reliability model is illustrated to be applied to aero-engine blades well, and the approach purposed in this paper is suitable for any actual machinery component of aero-engine rotor systems.     

共信道干扰环境下星基ADS-B系统监视性能

星基广播式自动相关监视系统（星基ADS-B）是实现广域范围内航空器监视的主要技术手段。为揭示星基ADS-B系统共信道干扰对系统监视性能的影响，提出了星基ADS-B系统监视容量的计算方法。首先给出了星基ADS-B系统模型，随后理论分析给出消息正确接收概率、位置消息更新间隔及位置报告更新间隔的计算公式，以此为基础给出了星基ADS-B系统监视容量的计算公式，最后基于SNS软件构建了星基ADS-B仿真系统，仿真验证了理论结果的正确性。研究表明：星基ADS-B系统的监视容量由ADS-B应用子系统所要求的航空器位置报告更新间隔、航空器-卫星链路的误码率、星-地面站链路的误码率及卫星数目联合确定。