平板上钝缘舵在超声速绕流中的三维分离特性研究

对于平板上的直立钝缘舵在M_∞=1.79、2.04和2.50的条件下,研究了该平板干扰区中的三维分离特性。着重讨论了钝缘直径、舵面迎角和来流马赫数对主分离线位置和形状的影响。分析了该类三维分离在性态上更强地依赖于无粘流动特性。此外,还对分离区内的二次分离发展过程和形态进行了初步讨论。     

Injection of 40-kHz-modulated electron beam from the satellite: II. Excitation of electrostatic and whistler waves

Beam-plasma interaction effects are studied during the active space experiment with electron and Xe-ion beam injections in an ionospheric plasma. Permanent 40-kHz-modulated electron beam injection occurs simultaneously with a xenon-ion beam injected by the Hall-type plasma thruster operating in a square-pulse mode (100/50 s for a job/pause duration). The unusual behavior of the background charged particle fluxes and wave activity stimulated during the beam-plasma interaction have been registered by the scientific instruments onboard Intercosmos-25 station (IK-25) and Magion-3 subsatellite. The longitudinal and electromagnetic wave instabilities and their mutual relationship are considered in order to explain the observed effects. The excitation of electrostatic waves by the electron injection has been considered for different resonance conditions near the linear stability boundary. Beam-driven electromagnetic instability is responsible for the backward-propagating whistler waves excited via cyclotron resonance. Competition of these two beam instabilities is one of the subjects of the present study.     

Cutting path-dependent machinability of SiCp/Al composite under multi-step ultra-precision diamond cutting

Particle-tool interactions, which govern the synergetic deformation of SiC particle reinforced Al matrix composites under mechanical machining, strongly depend on the geometry of particle position residing on cutting path. In the present work, we investigate the influence of cutting path on the machinability of a SiCp/Al composite in multi-step ultra-precision diamond cutting by combining finite element simulations with experimental observations and characterization. Be consistent with experimentally characterized microstructures, the simulated SiCp/Al composite is considered to be composed of randomly distributed polygonally-shaped SiC particles with a volume fraction of 25vol%. A multi-step cutting strategy with depths of cut ranging from 2 to 10 μm is adopted to achieve an ultimate depth of cut of 10 μm. Intrinsic material parameters and extrinsic cutting conditions utilized in finite element simulations of SiCp/Al cutting are consistent with those used in corresponding experiments. Simulation results reveal different particle-tool interactions and failure modes of SiC particles, as well as their correlations with machining force evolution, residual stress distribution and machined surface topography. A detailed comparison between numerical simulation results and experimental data of multi-step diamond cutting of SiCp/Al composite reveals a substantial impact of the number of cutting steps on particle-tool interactions and machined surface quality. These findings provide guidelines for achieving high surface finish of SiCp/Al composites by ultra-precision diamond cutting.     

激波-边界层-分离流相互干扰三维湍流的数值模拟

本文采用数值方法求解时间相关三维可压缩雷诺平均Ｎａｖｉｅｒ－Ｓｔｏｋｅｓ方程组,模拟激波—边界层—分离流相互干扰三维湍流流动。湍流模型为Ｂａｄｗｉｎ－Ｌｏｍａｘ两层代数模型,改进后用于三维内流问题。采用单元中心有限体积法离散流场控制方程,ＶａｎＬｅｅｒ矢通量格式计算无粘通量,中心差分法计算粘性通量,ＬＵＳＧＳ时间推进格式计算定常流场。本文以二元跨音速扩压器内三流动为算例,数值模拟较强激波—边界层—分离流相互干扰维湍流流动,并与实验结果进行了比较。数值模拟结果,在激波强度、分离点位置和再附点位置等方面,与实验结果吻合较好。     

飞机智慧座舱发展技术研究

未来飞机座舱智慧化转型是必然趋势,研究飞机智慧座舱发展技术能够为未来飞机智慧座舱的设计提供参考支撑。本文探讨了智能与智慧的区别,提出了飞机智慧座舱的概念与设计内涵,总结出深度感知与沉浸式交互、类人的认知及开放性与个性化定制服务的智慧座舱功能设计要素;梳理了发展飞机智慧座舱亟需解决的五项关键技术：多维度深度信息感知与融合技术、先进信息显示技术、沉浸式自然交互技术、智能态势认知技术、多智能体自主适应技术。通过关键技术的分析对未来飞机智慧座舱的发展提出了新的思考。     

某电源管理仿真测试环境软件的设计与实现

介绍了某电源管理的仿真测试环境软件的设计与实现,仿真测试环境硬件采用工业控制计算机,软件采用图形化语言LABVIEW来实现。仿真测试环境为电源管理提供完整的虚拟的运行环境。在仿真测试环境中用运行图实时地显示电源管理的运行状态,且能动态的设置仿真测试环境的状态,改变电源管理的运行环境。本仿真测试环境具有良好的人机交互界面,能够实时地与电源管理进行交互。     

基于曲率的指尖检测方法

指尖检测是基于视觉的徒手人机交互系统的关键环节,由于背景的复杂性和系统的实时性要求,导致指尖的精确定位在处理速度和准确性方面存在很大问题。本文针对这一问题,提出了一种简单高效的基于曲率的指尖检测方法。该方法首先将输入视频流基于肤色空间进行二值化,并将二值化后的视频序列作为输入数据;然后采用边缘检测算法提取出肤色区域的边缘(肤色区域的轮廓),在肤色区域的轮廓上根据曲率来对类指尖的点进行检测,并且根据类指尖点的位置关系来判定一个肤色区域是不是手;最后通过过滤算法过滤掉误判手臂点。实验结果表明,该方法在不同的应用背景下都具有很好的检测效果,对光照的鲁棒性也较高,并且能够达到实时检测的效果。     

正反顺序加载下安装边螺栓预紧力分散度的数值模拟与试验验证

在航空发动机机匣安装边装配过程中,不同位置螺栓之间会产生弹性交互作用,不同加载方案会使装配后的螺栓预紧力存在一定的分散度。针对这一问题,建立了3层带止口机匣安装边3维接触有限元模型,研究不同加载方案下螺栓预紧力的施加方法。基于有限元模型数值模拟了3层机匣安装边分别在顺序加载方案、交叉加载方案和正反顺序2轮加载方案下螺栓预紧力的分散度。搭建了相应的试验装置,分别对3种加载方案的预紧力分散度进行试验验证。结果表明：采用正反顺序2轮加载后的螺栓预紧力分散度最小,在3层止口机匣安装边上采用正反顺序2轮加载方案后的螺栓预紧力分散度较小,在有限元仿真中螺栓预紧力分散度为2.43%,在试验中螺栓预紧力分散度为4.98%。采用此方案加载后,止口机匣安装边能达到更好的密封效果和较好的刚度对称性。     

A self-similar solution of a curved shock wave and its time-dependent force variation for a starting flat plate airfoil in supersonic flow

The problem of aeroelasticity and maneuvering of command surface and gust wing interaction involves a starting flow period which can be seen as the flow of an airfoil attaining suddenly an angle of attack. In the linear or nonlinear case, compressive Mach or shock waves are generated on the windward side and expansive Mach or rarefaction waves are generated on the leeward side. On each side, these waves are composed of an oblique steady state wave, a vertically-moving one-dimensional unsteady wave, and a secondary wave resulting from the interaction between the steady and unsteady ones. An analytical solution in the secondary wave has been obtained by Heaslet and Lomax in the linear case, and this linear solution has been borrowed to give an approximate solution by Bai and Wu for the nonlinear case. The structure of the secondary shock wave and the appearance of various force stages are two issues not yet considered in previous studies and has been studied in the present paper. A self-similar solution is obtained for the secondary shock wave, and the reason to have an initial force plateau as observed numerically is identified. Moreover, six theoretical characteristic time scales for pressure load variation are determined which explain the slope changes of the time-dependent force curve.     

二维喷管的初始流动

基于可压缩Navier-Stokes方程,采用大涡模拟方法与高精度混合WENO/TCD格式,对Ma=1.4的超声速平面射流初始流场进行了数值研究.数值结果清晰地描述了超声速平面射流初始流场的结构特征,包括主涡环与激波结构以及它们演变过程.因主涡环内存在涡导激波对,激波与涡相互作用加速射流剪切层失稳,使剪切层首次卷起形成小涡的位置出现在涡导激波对后,此与亚声速射流情况不同.小涡串卷起成后,相继与涡导激波对相互作用,使激波出现明显的变形并加速主涡环失稳.