基于矩阵变换和混合方法的扫掠曲面

提出了用矩阵变换和混合的方法，构造多种由相关曲线依据不同的扫掠规则生成的扫掠曲面。扫掠规则可以分为平行扫掠、脊线扫掠、同步扫掠和旋转扫掠四种。最后将其应用于复杂外形产品的设计，并用工程实例加以验证     

AN INVESTIGATION OF HOT FILM SIGNALS ON LOCATING BOUNDARY LAYER TRANSITION

ＡＮＩＮＶＥＳＴＩＧＡＴＩＯＮＯＦＨＯＴＦＩＬＭＳＩＧＮＡＬＳＯＮＬＯＣＡＴＩＮＧＢＯＵＮＤＡＲＹＬＡＹＥＲＴＲＡＮＳＩＴＩＯＮＷａｎｇＴｉｅｃｈｅｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＡｅｒｏｄｙｎａｍｉｃｓ，ＮＵＡＡ２９ＹｕｄａｏＳｔｒｅｅｔ，Ｎａｎｊｉ...     

高温受弯构件表面裂纹疲劳扩展寿命预测

基于J-积分半经验公式建立了构件表面裂纹在其长度和深度方向上的疲劳扩展速率表达式,用来预计模拟SUS304钢构件在550℃高温环境中受弯曲载荷作用下表面裂纹的疲劳扩展寿命.并在相同条件下进行了疲劳裂纹扩展试验.结果表明,预测曲线与实验数据基本一致,证明了本文预测方法的有效性.     

半球动压马达转子端面垂直度检测装置

在半球动压马达转子端面垂直度的工序中,检测一直是影响生产效率的重要瓶颈问题,因没有理想的检测手段,目前只能依赖三坐标仪进行检测.因检测频繁、测点多、耗时长,极大地影响了生产效率.介绍了一种基于光学检测原理研制的端面垂直度检测装置,工程实际应用结果表明,它具有检测精度高、操作简便、时间短的特点,极大地提高了检测效率,在提高生产效率方面具有重大的实际意义.     

Delineation of possible influence of solar variability and galactic cosmic rays on terrestrial climate parameters

The present paper has investigated the associations of solar activity (SA), represented by total solar irradiance (TSI), galactic cosmic rays (GCR) and terrestrial climate parameters in particular the global cloudiness and global surface temperature. To that end, we have analysed thirty five years (1983–2018) data of these parameters and have applied the Granger-causality test in order to assess whether there is any potential predictability power of one indicator to the other. The correlations among the involved parameters are tested using Vector Auto Regression (VAR) model and variance decomposition method. As a result of the above analysis, we have found that the TSI is an important factor and has contributed about 8.77 ± 0.42% in the cosmic ray intensity variations. In case of cloud cover variations, the other three parameters (TSI, cosmic ray and global surface temperature) have played a significant role. Further, the TSI changes have contributed 1.68 ± 0.03% fluctuations in the variance of the cloud cover while the cosmic ray intensity and global surface temperature have contributed about 4.89 ± 0.08% and 10.87 ± 1.41% respectively. In case of the global surface temperature anomaly both TSI and cloud covers have contributed about 5.07 ± 0.47% and 14.42 ± 2.13% fluctuations respectively. Additionally, we have also assessed the impact of internal climate oscillations like multivariate ENSO index (MEI), north Atlantic oscillations (NAO) and quasi biennial oscillations (QBO) on cloud cover variations. The contribution of these internal oscillations e.g. ENSO, NAO and QBO in cloud cover variation were reported as 7.48 ± 1.02%, 5.51 ± 0.16% and 1.36 ± 0.43% respectively.     

太空中的PM2.5——太阳系尘埃动力学研究进展

对太阳系尘埃动力学所涉及到的基本内容进行概述，包括尘埃的种类、成分、尺寸、密度、形状和生命周期。介绍了近年来在尘埃的来源与生成机制方面的力学过程、主要理论、模型与方法，包括冲击溅射、表面喷射、风化、滑坡、质量脱落、旋转断裂等，阐述了尘埃的充电过程与磁场环境，简要概述了航天任务的尘埃探测结果，介绍了尘埃受力模型、单个尘埃颗粒的运动以及大量尘埃的分布特征、动力学现象及内在规律方面的最新研究结论。最后对太阳系尘埃动力学领域的未来发展趋势进行了展望。     

混合小推力航天器轨道保持高性能滑模控制

针对采用太阳帆、太阳电混合小推力推进的航天器，研究了其在日心悬浮轨道的保持控制问题。为解决已有控制方法中未综合考虑内部未建模动态和外部未知扰动的问题，以及进一步提高系统控制性能，设计了一种高性能滑模控制策略。首先，考虑模型不确定性，建立了混合小推力航天器在日心悬浮轨道柱面坐标系的动力学方程；其次，基于改进型条件积分滑模面和径向基（RBF）神经网络设计了控制律，结合自适应方法在线估计不确定参数；接着，将求取的虚拟控制量在推进剂最优条件下转换成实际控制量，即太阳帆姿态角和太阳电推进力；最后，数值仿真验证了上述设计方法提高了系统鲁棒性，减小了轨道位置超调，并且混合推进相比于单一太阳帆推进，在更短收敛时间内控制精度提高了4个数量级，相比于单一太阳电推进，一年可以节省约89.6%的推进剂。     

Grindability and Surface Integrity of Cast Nickel-based Superalloy in Creep Feed Grinding with Brazed CBN Abrasive Wheels

The technique of creep feed grinding is most suitable for geometrical shaping, and therefore has been expected to improve effectively material removal rate and surface quality of components with complex profile. This article studies experimentally the effects of process parameters (i.e. wheel speed, workpiece speed and depth of cut) on the grindability and surface integrity of cast nickel-based superalloys, i.e. K424, during creep feed grinding with brazed cubic boron nitride (CBN) abrasive wheels. Some important factors, such as grinding force and temperature, specific grinding energy, size stability, surface topography, microhardness and microstructure alteration of the sub-surface, residual stresses, are investigated in detail. The results show that during creep feed grinding with brazed CBN wheels, low grinding temperature at about 100 °C is obtained though the specific grinding energy of nickel-based superalloys is high up to 200-300 J/mm³. A combination of wheel speed 22.5 m/s, workpiece speed 0.1 m/min, depth of cut 0.2 mm accomplishes the straight grooves with the expected dimensional accuracy. Moreover, the compressive residual stresses are formed in the burn-free and crack-free ground surface.     

基于改进DQN的复合模式在轨服务资源分配

针对开展在轨服务前的资源分配非线性多目标优化问题，构建复合服务模式下的在轨资源分配模型，基于对DQN （Deep Q-Network）方法的收敛性和稳定性改进，提出了一种在轨服务资源分配方法。该方法能够应对同时包含"一对多""多对一"的复合服务模式，并在满足预期成功率的前提下优先分配重要服务对象，兼顾资源分配综合效益和总体能耗效率，达到了以期望成功率、较少资源投入尽快完成任务的综合目标。仿真实验表明，改进DQN方法能够在任务执行前依据服务对象重要程度自主分配航天器资源，收敛速度快、训练误差低，在分配效益和总体能耗的优化方面具有明显的比较优势。     

Tool Life and Surface Integrity in High-speed Milling of Titanium Alloy TA15 with PCD/PCBN Tools

Titanium alloys are widely used in aeronautics that demand a good combination of high strength, good corrosion resistance and low mass. The mechanical properties lead to challenges in machining operations such as high process temperature as well as rapidly increasing tool wear. The conventional tool materials are not able to maintain their hardness and other mechanical properties at higher cutting temperatures encountered in high speed machining. In this work, the new material tools, which are polycrystalline diamond (PCD) and polycrystalline cubic boron nitride (PCBN) tools, are used in high-speed milling of Ti-6.5Al-2Zr-1Mo-1V (TA15) alloy. The performance and wear mechanism of the tools are investigated. Compared to PCBN tool, PCD tool has a much longer tool life, especially at higher cutting speeds. Analyses based on the SEM and EDX suggest that attrition, adhesion and diffusion are the main wear mechanisms of PCD and PCBN tools in high-speed milling of TA15. Oxidation wear is also observed at PCBN tool/workpiece interface. Roughness, defects, micro-hardness and microstructure of the machined surface are investigated. The recorded surface roughness values with PCD/PCBN tools are bellow 0.3 μm at initial and steady cutting stage. Micro-hardness analysis shows that the machined surface hardening depth with PCD and PCBN tools is small. There is no evidence of sub-surface defects with PCD and PCBN tools. It is concluded that for TA15 alloy, high-speed milling can be carried out with PCD/PCBN tools.