低轨卫星移动系统的点波束确定算法

根据星座空间几何基础,以及卫星对地面的覆盖情况以及点波束的形状,通过建立数学模型,提出了地面终端确定所在点波束的仿真算法;并以典型的低轨卫星移动系统Globalstar为仿真背景,仿真得出了与实际系统参数接近的结果,验证了算法。     

一种基于窄带雷达的低轨空间目标识别方法

通过分析低轨空间目标的姿态运动对窄带回波脉冲数据的调制,表明低轨空间目标窄带回波脉冲数据信号的相位比幅度包含了更多的目标特征信息。采用小波分析从实测窄带相参回波特性数据的相位中,估计低轨空间目标的整体运动趋势,判别低轨空间目标的粗略类型,并通过大量实测数据的实验结果验证了该方法判别低轨空间目标粗略类型的有效性。     

太阳同步轨道卫星光学特性

为了分析太阳同步轨道卫星的光学特性,对FY-1卫星的可见光和红外波段光学信号进行了仿真计算和模拟试验验证.通过对外部辐射及内部热源的分析,计算了卫星的温度场,采用随机起伏表面算法模拟表面覆盖材料外表面,通过阴影遮挡判断及双向反射分布函数(BRDF, Bi-directional Reflectance Distribution Function)模型计算卫星对外部辐射的反射特性,编程计算得到在可见光0.4~1.0μm和红外8~14 μm,14~16 μm波段下卫星的光学特性.结果表明红外辐射亮度与表面温度相关,8~14 μm最大约90 W/(m²·sr)、14~16 μm最大约20 W/(m²·sr).空间可见光辐射强度具有明显的镜面反射效应,卫星主体峰值2 200 W/sr.通过地面模拟测量空间目标的温度和红外辐射验证了温度及红外辐射仿真计算模型,可见光辐射强度仿真计算结果与地面模型卫星测量结果误差在20%以内.     

Digital signal processing and numerical analysis for radar in geophysical applications

Numerical solutions for signal processing are described in this work as a contribution to study of echo detection methods for ionospheric sounder design. The ionospheric sounder is a high frequency radar for geophysical applications. The main detection approach has been done by implementing the spread-spectrum techniques using coding methods to improve the radar’s range resolution by transmitting low power. Digital signal processing has been performed and the numerical methods were checked. An algorithm was proposed and its computational complexity was calculated.     

测量时刻偏差对单星定轨误差的影响分析

为评估测量时刻偏差对单星定轨等效测量误差的影响,根据单星定轨处理策略分析了其理论模型,指出测站接收机的测量时刻偏差由测站时钟钟差以及测量时刻不准确度等组成。试验数据分析表明,测站钟差经一阶多项式拟合后的残差可近似为零均值的测量噪声;数值仿真结果表明,卫星信号发射时刻1ms误差导致GEO、IGSO、MEO三种卫星的等效测距误差分别为006cm、40cm、80cm。     

Geostationary orbit determination using SATRE

A new strategy of precise orbit determination (POD) for GEO (Geostationary Earth Orbit) satellite using SATRE (SAtellite Time and Ranging Equipment) is presented. Two observation modes are proposed and different channels of the same instruments are used to construct different observation modes, one mode receiving time signals from their own station and the other mode receiving time signals from each other for two stations called pairs of combined observations. Using data from such a tracking network in China, the results for both modes are compared. The precise orbit determination for the Sino-1 satellite using the data from 6 June 2005 to 13 June 2005 has been carried out in this work. The RMS (Root-Mean-Square) of observing residuals for 3-day solutions with the former mode is better than 9.1 cm. The RMS of observing residuals for 3-day solutions with the latter mode is better than 4.8 cm, much better than the former mode. Orbital overlapping (3-day orbit solution with 1-day orbit overlap) tests show that the RMS of the orbit difference for the former mode is 0.16 m in the radial direction, 0.53 m in the along-track direction, 0.97 m in the cross-track direction and 1.12 m in the 3-dimension position and the RMS of the orbit difference for the latter mode is 0.36 m in the radial direction, 0.89 m in the along-track direction, 1.18 m in the cross-track direction and 1.52 m in the 3-dimension position, almost the same as the former mode. All the experiments indicate that a meter-level accuracy of orbit determination for geostationary satellite is achievable.     

太阳帆航天器行星际轨道转移优化算法

研究基于遗传算法的太阳帆行星际转移轨道的全局优化问题.通过极小值原理推导了太阳帆全局优化控制律,并以太阳帆飞行时间最短为优化目标函数,运用遗传算法对发射时间、到达时间和协态变量初值进行参数优化设计.为了解决轨道转移这一多约束优化问题,在遗传算法中加入动态罚函数.在此理论基础上作了从地球同步轨道出发到火星同步轨道转移和从地球出发与火星交会两个算例,仿真结果表明了该方法在太阳帆转移轨道全局优化中的有效性.     

提高零控脱靶量预测精度的一种方法

对于大气层外拦截问题中以零控脱靶量(ZEM-zero effort miss)作为指标的预测制导方法,其ZEM的预测精度直接影响到最终的拦截任务.在线性化平方反比引力模型下,给出了基于目标轨道坐标系的ZEM预测算法,导出ZEM发生条件,并提出一种提高ZEM预测精度的方法,即通过初值轨道角速率的选取可明显改善算法的预测精度.同时将该算法与地心赤道惯性坐标系下的ZEM预测算法进行了比较研究,数学仿真结果表明该预测算法精度较高,具有一定的工程应用价值.     

广义多圈Lambert算法求解多脉冲最优交会问题

基于一种高效高精度的Battin多圈Lambert算法提出一种考虑轨道摄动的广义多圈Lambert算法.与现有算法相比,本算法虽然原理复杂但计算流程非常简单,效率极高,分别通过几次内外循环就可满足精度要求.广义多圈Lambert算法结合一种可行解迭代交会模型构成了一个通用的多圈多脉冲交会规划框架,应用两步法求解此多变量的复杂工程优化问题,首先利用高效率的进化全局优化算法以及解析轨道模型作全局搜索,然后利用序列二次规划算法以及简化高精度轨道计算模型作局部搜索,此方法可以保证高效高精度的求解多圈多脉冲交会问题.算例表明此方法特别适用于满足实际工程约束的交会规划问题.     

超低轨道地球卫星脉冲星/星光折射/光谱组合导航

针对超低轨道地球卫星导航自主需求,提出了一种脉冲星/星光折射/光谱测速组合天文导航方法。首先根据地球超低轨道卫星运行轨道动力学方程建立导航系统状态模型;分别根据脉冲到达时间差和星光折射角与天体光谱频率建立导航系统量测模型;使用Unscented卡尔曼滤波方法,降低随机误差对导航精度的影响,使用基于UKF的信息融合方法,有效融合了三种天文导航方法结果数据。经计算机仿真分析,该组合导航方法位置导航误差均值为85.62m,速度误差均值0.190m/s,能够满足超低轨道地球卫星在轨运行导航需求。