模糊等价关系下滚动轴承振动性能变异分析

在小样本且概率分布未知条件下,提出模糊等价关系和自助最大熵模型,并通过变异概率分析滚动轴承振动性能变异过程。对滚动轴承振动加速度原始数据分组得到样本,选定本征样本,计算各样本间的模糊等价系数;运用自助最大熵模型建立各样本的概率密度函数,通过交集法得到各样本相对于本征样本的变异概率,建立模糊等价系数和变异概率的关系曲线以实现对变异过程的监控;通过仿真和实验案例验证了所提模型的可行性和正确性。实验结果表明:随着磨损直径的逐渐增大,变异概率曲线呈“躺椅状”非线性上升趋势,对应滚动轴承磨损的3个阶段,即初级磨合阶段、正常性能退化阶段和性能恶化阶段。      

基于模糊理论和灰色关联分析的飞机相似性评估方法

提出了基于模糊理论和灰色关联分析的飞机相似性评估方法,该方法主要由语义变量的三角模糊转换模型和灰色关联分析方法组成.本文选取了飞机的9个属性,用来评估新旧机型之间的相似性,并选取正处于研制中的某新型飞机X作为实例进行分析.分析表明,该方法的相似性评估结果符合生产实际.     

Precise orbit determination and precision comparison for FY3C and FY3D with receiver antenna GPS and BDS PCV using spaceborne BDS and GPS observation data

The FY3C and FY3D satellites were equipped with global navigation satellite occultation detector (GNOS) receivers that received both GPS and BDS-2 signals. For further improving precise orbit determination (POD) precisions, we estimated receiver GPS and BDS signal phase center variations (PCV) models with 2° and 5° resolutions and set the different weights for GPS and BDS-2 observations in the combined POD. The BDS-based POD precision using BDS-2 satellite antenna phase center offset (PCO) values from the China Satellite Navigation Office (CSNO) are not as accurate as those obtained from the International GNSS Service (IGS) Multi-GNSS experiments project (MGEX). The estimated receiver GPS and BDS PCV models with 2° and 5° resolutions were estimated from the GPS phase residuals of GPS-based POD and BDS phase residuals of combined POD, respectively. In most cases, the POD precisions using the estimated PCVs with 2° resolution are superior to those with 5° resolution. The precisions of the BDS-based POD and combined POD were both improved by introducing the receiver BDS PCV models. The weighting for GPS and BDS-2 observations can further improve the precision of the combined POD. The tested results of selected weights are better than those with equal weight in the combined POD. The experiment results show that orbital precisions of FY3C are worse than those of FY3D.     

载人航天器太阳翼多姿态输出能力建模及分析

载人航天器太阳翼在轨运行期间除正常对日定向转动外，根据飞行任务要求可能需要工作在α轴水平归零或垂直归零等特殊状态。在特殊工作模式下，太阳入射角和太阳翼的输出能力变化曲线更加复杂。建立太阳入射角与轨道角、太阳高度角、β轴转角等变量的数学模型，分析太阳入射角的变化规律，并结合光照区时长，建立太阳翼在轨输出能力的预测模型。与实际飞行数据相比较，表明该模型可较为准确地评估特殊工作模式下太阳翼的输出能力，可用于在轨整舱能量平衡分析，为飞行任务计划安排提供参考。     

基于FY-3C/VIRR地表温度数据的上海市热岛效应时空特征分析

城市热岛效应是当前城市生态领域关注的焦点问题之一。本文以上海为例，基于FY-3C/VIRR LST数据，通过计算研究区的热岛强度指数与热岛比例指数，定量分析上海市2019年全年城市热岛效应的时空变化特性。结果表明：上海市2019年全年各月份的总热岛区域面积均在40%以上，城市热岛效应较为显著，其中7月份总热岛区域面积最大；上海市热岛效应的空间分布呈现出“北热南冷”的格局，热岛效应主要分布在中部和北部； 上海市5—7月热带比例指数较高，为较严重热岛，随着8月份平均地表温度的继续升高，热岛比例指数有所下降。     

卫星在轨推进剂补加量测量方法精度研究

卫星在轨推进剂补加量的精确测量技术是在轨补加任务的关键技术之一。本文结合型号攻关结果，提出2种在轨推进剂补加量测量方法数学模型，分别是压力-体积-温度(PVT)法和超声波流量计法。首先，PVT法是一种通过补加前后受体卫星贮箱剩余量反算补加量的间接测量方法，而超声波流量计法是利用超声波顺逆流相位差进行测量的直接测量方法;其次，在推进剂补加量测量模型的基础上，进一步通过取变分的手段提出2种模型的精度分析解析模型，解析的精度分析模型不仅可用于定性分析影响测量精度的因素，还可量化评价各个因素对测量精度的影响;最后，利用现有在研单机的精度水平及精度分析解析模型分析了2种方法的测量精度，验证了方法的有效性。     

Vector deflection stability control of aero-engine based on linear active disturbance rejection

Aimed at the problem of instability in engine control caused by vector deflection in experiment of turbofan engines with Axisymmetric Vectoring Exhaust Nozzle (AVEN), a vector deflection stability control method of aero-engine based on Linear Active Disturbance Rejection Control (LADRC) is proposed. Firstly, based on CFD numerical simulation, aerodynamic performance model of AVEN is established, and the aerodynamic load change rule of the nozzle throat area actuator during vector deflection is revealed. Subsequently, the integrated model of AVEN/turbofan engine is established by Simulink/AMESim co-simulation. Finally, the nozzle throat area control loop based on LADRC is designed. The simulation results show that the integrated model can reflect the influence of vector deflection on the stability of the control system. The accuracy comparison between the fan rotor speed and the test data during vector deflection is larger than 1%, indicating a high degree of confidence. Compared with the conventional PID control, the designed LADRC control loop reduces the speed of the low-pressure rotor during vector deflection by 70%, which effectively improves the control stability of the vector deflection. Meanwhile, the fuel flow ratechange during the vector deflection process is smaller and more economical, which provides an important reference for engineering applications.     

舰载雷达鉴定试验数据处理关键问题分析

舰载雷达鉴定试验是雷达试验的重要部分.为了对雷达的性能作出置信度高的评判,数据处理是关键.只有因素考虑全面、模型建立正确,才能获得高精度的真值数据,进而实现对雷达的可靠评判.分析了数据处理的流程和关键环节,针对空间变换、舰体运动参数补偿、时间校准3个关键问题进行建模,并用实例计算结果验证了模型的可行性和有效性.     

基于传力路径的飞机加强框结构优化方法研究

在飞机结构设计中,主传力构件的轻量化设计十分关键.通过引入结构承载因子,对加强框结构的传力路径进行量化,得到加强框结构最佳的传力路径.相对于传统的结构尺寸优化设计方法,提出的基于承载因子的传力路径优化方法仅需要考虑结构外形和载荷对结构承载的影响,不必考虑结构细节尺寸大小,因此,该方法具有高度的概括性和综合性.同时,通过...