苏联复合材料结构无损检测方法和仪器设备述评

对苏联复合材料结构无损检测方法、仪器设备、技术特长和发展方向做了简要述评,并对其采用的典型仪器设备系统技术参数给以简要介绍。最后联系我国固体火箭发动机无损检测工作实际提出了两点建议。     

矩形截面弯管内气固两相流及对管壁磨损的数值分析

在便于描述矩形截面弯管流动的曲线坐标系中，计算了气固两相流，颗粒对管壁的磨损位置与磨损量。分析了弯管曲率、弯管安放方式、颗粒大小对磨损状况的影响。本文计算与实验数据比较，符合良好。     

月球立方星姿态控制系统的初步设计与测试

立方星是一种模块化的微小卫星,在科学探测与专业人才培养等方面具有重要意义。针对目前立方星任务逐渐从近地轨道向深空扩展的发展趋势,以立方星月球深空任务为背景,利用商业器件设计并实现了初步的立方星姿态控制系统,以及姿态控制系统所必需的结构、电源、计算机等立方星子系统,同时给出了姿态测试平台的设计方案及其硬件实现。在所搭建硬件平台上,通过测量飞轮控制器的阻尼系数,对控制模型进行参数辨识与标定,获得了与数值仿真一致的实物测试结果。针对姿态控制系统设计了PD控制律,并在控制实验中实现了至任意姿态角的机动控制。     

小卫星非常规动力学分析与控制

针对小卫星研制中出现的一些非常规动力学问题进行研究,并提出解决办法。针对小卫星组件最大冲击谱量级超出常规冲击试验规范谱的分析与验证困难,通过研究提出了能够分析评估组件高量级冲击的方法。针对小卫星随机振动下强度设计方法还存在较大误差,分析了系统模态质量比与模态频率在一定频段的影响规律,认为忽略模态质量耦合会带来误差,提出了考虑模态质量耦合的准静态载荷计算方法。最后,针对小卫星整星开展了减振研究,分析了正弦和随机减振效果,对于对称安装减振系统,提出了减振系统的主频率计算公式。     

J2轨道模型对月地激光通信预瞄准精度影响研究

基于J_2轨道预测模型,设计了不同倾角和轨道高度圆轨道月球卫星,通过将J_2轨道预测模型预瞄准仿真结果与直接积分RKF7(8)法仿真结果相对比,研究了不同类型月球卫星轨道对-Y面卫星舱板激光通信终端瞄准精度的影响。仿真结果表明,J_2轨道预测模型可以满足月球极地卫星月地激光通信要求,当轨道高度为1 000 km和2 000 km的时候,10 min方位角偏差不超过40μrad,而俯仰角偏差仅为7μrad时,在一定程度上J2轨道预测模型可以满足月地激光通信预瞄准要求。     

“龙江2号”月球轨道微卫星定轨分析

微纳卫星深空探测任务中,通常所分配的测控资源有限,因此有必要对有限测控资源条件下微纳卫星的定轨精度进行分析。以微纳卫星深空探测为背景,采用"龙江2号"微卫星的轨道测量数据对其定轨精度进行了分析。"龙江2号"微卫星只有USB轨道测量数据,且环月段测控资源相对紧张,每天有两站跟踪,共约3～4 h的轨道测量数据。首先介绍了"龙江2号"微卫星飞行任务及其飞行过程中影响测定轨的因素;其次给出了定轨的动力学模型,对微卫星地月转移段的定轨精度进行了分析;最后通过分析摄动力、动量轮卸载以及数据弧段长度的影响,给出了微卫星环月阶段所使用的定轨策略,并通过重叠弧段比较的模式,给出了微卫星环月段的定轨精度。研究结论可以为后续微纳卫星深空探测任务提供有益参考。     

基于星体边缘和轨道投影的光学自主导航算法

针对光学导航中存在的通过星体（球体）图像部分边缘点拟合椭圆参数计算轨道参数产生中间误差的问题,提出利用边缘点映射轨道参数的直接投影模型,避免拟合椭圆参数的方法。在小孔成像模型基础上,建立了边缘点与轨道参数的直接投影数学模型,对其映射过程进行了理论推导,利用列文伯格-马夸尔特迭代算法进行求解轨道参数。用实际探测器以及镜头参数进行数值仿真验证,结果表明：该方法在相同边缘点的条件下,轨道精度可以达到5‰。与传统方法相比,这种方法避免了椭圆的拟合过程,减少了引入中间误差过程。     

Which way is the bookstore? A closer look at the judgments of relative directions task

We present a detailed analysis of a widely used assay in human spatial cognition, the judgments of relative direction (JRD) task. We conducted three experiments involving virtual navigation interspersed with the JRD task, and included confidence judgments and map drawing as additional metrics. We also present a technique for assessing the similarity of the cognitive representations underlying performance on the JRD and map-drawing tasks. Our results support the construct validity of the JRD task and its connection to allocentric representation. Additionally, we found that chance performance on the JRD task depends on the distribution of the angles of participants’ responses, rather than being constant and 90 degrees. Accordingly, we present a method for better determining chance performance.     

An empirical solar radiation pressure model for satellites moving in the orbit-normal mode

We present a family of empirical solar radiation pressure (SRP) models suited for satellites orbiting the Earth in the orbit normal (ON) mode. The proposed ECOM-TB model describes the SRP accelerations in the so-called terminator coordinate system. The choice of the coordinate system and the SRP parametrization is based on theoretical assumptions and on simulation results with a QZS-1-like box-wing model, where the SRP accelerations acting on the solar panels and on the box are assessed separately. The new SRP model takes into account that in ON-mode the incident angle of the solar radiation on the solar panels is not constant like in the yaw-steering (YS) attitude mode. It depends on the elevation angle of the Sun above the satellite’s orbital plane. The resulting SRP vector acts, therefore, not only in the Sun-satellite direction, but has also a component normal to it. Both components are changing as a function of the incident angle. ECOM-TB has been used for precise orbit determination (POD) for QZS-1 and BeiDou2 (BDS2) satellites in medium (MEO) and inclined geosynchronous Earth orbits (IGSO) based on IGS MGEX data from 2014 and 2015. The resulting orbits have been validated with SLR, long-arc orbit fits, orbit misclosures, and by the satellite clock corrections based on the orbits. The validation results confirm that—compared to ECOM2—ECOM-TB significantly (factor 3–4) improves the POD of QZS-1 in ON-mode for orbits with different arc lengths (one, three, and five days). Moderate orbit improvements are achieved for BDS2 MEO satellites—especially if ECOM-TB is supported by pseudo-stochastic pulses (the model is then called ECOM-TBP). For BDS2 IGSOs, ECOM-TB with its 9 SRP parameters appears to be over-parameterized. For use with BDS2 IGSO spacecraft we therefore developed a minimized model version called ECOM-TBMP, which is based on the same axis decomposition as ECOM-TB, but has only 2 SRP parameters and is supported by pseudo-stochastic parameters, as well. This model shows a similar performance as ECOM-TB with short arcs, but an improved performance with (3-day) long-arcs. The new SRP models have been activated in CODE’s IGS MGEX solution in Summer 2018. Like the other ECOM models the ECOM-TB derivatives might be used together with an a priori model.     

同步双小行星系统共振轨道设计

研究了同步双小行星系统中共振轨道的设计方法及演化规律。首先，基于双椭球模型建立探测器运动方程，并给出共振轨道初值选取方法。然后，利用改进并行打靶法，提出一种双小行星系统平面共振轨道两步修正方法。同时结合稳定性理论及分岔理论，给出双小行星系统三维共振轨道生成和延拓方法；最后，以双小行星系统1999KW4为例，设计了共振比为1∶1,1∶2,1∶3,1∶4,2∶3的平面和空间共振轨道族，并分析了共振轨道的特性及轨道周期和轨道能量的变化规律。给出的双小行星系统中共振轨道的设计方法具有普适性，对未来双小行星系统探测任务中的轨道设计具有一定的参考意义与借鉴价值。