The Crab pulsar seen with AquEYE at Asiago Cima Ekar observatory

We are developing fast photon-counter instruments to study the rapid variability of astrophysical sources by time tagging photon arrival times with unprecedented accuracy, making use of a Rubidium clock and GPS receiver. The first realization of such optical photon-counters, dubbed AquEYE (the Asiago Quantum Eye), was mounted in 2008 at the 182 cm Copernicus Observatory in Asiago. AquEYE observed the Crab pulsar several times and collected data of extraordinary quality that allowed us to perform accurate optical timing of the Crab pulsar and to study the pulse shape stability on a timescale from days to years with an excellent definition. Our results reinforce the evidence for decadal stability of the inclination angle between the spin and magnetic axis of the Crab pulsar. Future realizations of our instrument will make use of the Galileo Global Navigation Satellite System (GNSS) time signal.     

类IXV飞行器初期再入制导与姿态控制方法研究

摘要： 针对类IXV飞行器无翼式升力体构型及采用RCS/尾襟翼组合控制特点,研究其初期再入段的高精度制导与姿态控制方法.设计带过程约束的数值预测 校正制导律以提高制导系统的鲁棒性及精确性;根据其执行机构配置特点,设计基于RCS的航向控制律及基于RCS/气动舵的纵、横向复合控制律,并采用鲁棒伺服LQR技术进行控制参数快速设计.通过蒙特卡洛打靶仿真来验证算法的精度及鲁棒性.     

基于室内无线模型的穿墙损耗校正

K-M（Keenan-Motley）模型将单墙固定损耗值相加来计算室内无线信号穿透多墙的总损耗值,存在较大误差。针对该问题选取多种室内场景分别进行连续波（Continuous Wave,CW）测试,对无线信号穿墙损耗的影响因素和变化规律进行分析,提出了一种基于人工神经网络的室内无线模型穿墙损耗校正方法,对预处理后的测试数据进行训练并建立预测模型。经验证该预测模型符合校正判别准则,在实际场景下具有良好的预测准确度。     

干涉配合构件的应力腐蚀开裂特性

采用恒载荷拉伸实验技术,研究了镀锌３０ＧｒＭｎＳｉＡ锡螺栓干涉配合连接ＬＹ１２－ＣＺ铝合金构件在３．５％ＮａＣａｌ＋０．５％Ｈ２Ｏ２溶液中的应力腐蚀开裂特性。结果表明,随干涉量的增加,应力腐蚀敏感性有所下降,基材与紧固件的电偶效应对应力腐蚀繁感性有重大影响。     

A two-step weighted least-squares method for joint estimation of source and sensor locations: A general framework

It is well known that the Two-step Weighted Least-Squares(TWLS) is a widely used method for source localization and sensor position refinement. For this reason, we propose a unified framework of the TWLS method for joint estimation of multiple disjoint sources and sensor locations in this paper. Unlike some existing works, the presented method is based on more general measurement model, and therefore it can be applied to many different localization scenarios.Besides, it does not have the initialization and local convergence problem. The closed-form expression for the covariance matrix of the proposed TWLS estimator is also derived by exploiting the first-order perturbation analysis. Moreover, the estimation accuracy of the TWLS method is shown analytically to achieve the Cramér-Rao Bound(CRB) before the threshold effect takes place. The theoretical analysis is also performed in a common mathematical framework, rather than aiming at some specific signal metrics. Finally, two numerical experiments are performed to support the theoretical development in this paper.     

鸭式布局飞机矢量喷流对地面效应影响的风洞试验

针对单发鸭式布局飞机,通过低速风洞试验,研究了矢量喷流对飞机地面效应的影响特性。研究结果表明：发动机喷流使得飞机的地面效应增强,升力系数增加,降低飞机起飞/降落时的飞行速度,缩短起降距离,从而改善飞机起降性能。发动机喷管上/下偏转时,矢量喷流对飞机上下表面气流诱导不对称,均使地面效应阻力系数增量减小。在此基础上,基于数值模拟结果对喷流与地面效应的相互作用机理进行了分析。     

50吨级氢氧火箭发动机的设计与研制

系统性地回顾了长征五号运载火箭芯一级50t级氢氧火箭发动机YF-77的设计与研制历程。通过分析氢氧发动机的特点以及国内外氢氧发动机的发展现状,阐述了国内新一代运载火箭研发的技术路线和50t级氢氧火箭发动机的研制背景;对50t级氢氧火箭发动机的总体技术方案及其特点进行了分析与总结,并在此基础上对发动机主要组件的技术方案及其特点开展分析;对发动机热试车情况、可靠性验证情况和故障排除情况进行了分析;对50t级氢氧火箭发动机的研制情况、技术特点进行了总结,并对国内氢氧发动机和液氧/甲烷发动机的发展进行了展望。     

空间制造技术研究进展

分析了空间制造技术的发展背景与技术特点,介绍了国内外空间增材制造技术、空间焊接技术的发展情况,总结了相关领域的研究热点。包括非金属与金属空间增材制造工艺、装备的发展现状,空间电子束焊接、固相焊接等工艺与装备研究进展等。论述了我国空间制造技术研究的发展方向。研究结果可为我国空间制造技术研发提供参考。     

CAN总线在电液伺服阀性能测试系统中的应用

伺服阀性能测试系统中,测控电路和计算机间的模拟信号传输易受外界干扰,而把信号以数码形式通过CAN总线传输的方法,可以彻底消除外界干扰问题,还能提高系统的性能和可靠性。介绍了CAN总线硬件电路、程序设计及CANopen通讯协议的实现,讨论了CAN总线在测试系统上的实际应用。     

一类隔离驱动电路的“剩余驱动”问题

讨论直流变换器中将脉宽调制器（PWM）输出与受控MOS管栅极连接的一类开关驱动电路.专注于分析它在PWM电路关闭后对栅极产生的驱动信号,被命名为＂剩余驱动＂.描述这类剩余驱动的电气特性,说明它对变换器造成的危险,提出改进这类驱动电路以消除这些危险的4种方法.