燃气源控制气流热效应数值模拟研究

为了解迷宫形导热套环与流体之间的热交换对控制气流温度及压力的影响,采用整体求解法求解控制气流与多层套环之间的耦合传热问题。为确保计算结果在物理上的真实性,采用“假密度法”求解以温度T为求解变量的能量方程。计算得到了控制气流参量随时间的变化情况以及迷宫形多层导热套环的温度在不同时间点的分布情况,结果表明流场的三维复杂结构使得每个小孔射流与各层套环的传热情况都不同,流体与固体区域之间的换热量随时间变化,其中内套环和中套环对流体的吸热量随时间的增长而急速下降,从而导致控制气体的温度和压力都随时间而逐渐增大。计算所得的控制气流温度和压力与试验测量值的变化趋势相同,验证了计算方法的有效性。     

GPS total electron content and surface latent heat flux variations before the 11 March 2011 M9.0 Sendai earthquake

The present paper describes the variations of the GPS total electron content (TEC) from the International GNSS service network and surface latent heat flux (SLHF) from the Scientific Computing Division of the National Center for Atmospheric Research (NCAR) before the 11 March 2011 M9.0 Sendai earthquake, respectively. The analysis shows pronounced enhancements in the GPS TEC and SLHF a few days prior to the earthquake event. The maximum increase in the GPS TEC was about 30 TECu with an extended spatial distribution on a geomagnetically quiet day (Dst ? −20 nT, between two moderate geomagnetic storms), 8 March, 3 days prior to the earthquake. This giant positive disturbance was possibly associated with the impending disastrous earthquake and contributed from the enhanced solar radiation. Moreover, there were several anomalous regions of SLHF on the global map, but an area of enhanced SLHF very close to the epicenter. The purpose of this paper is to report the existence of the changes in surface and ionosphere, and show the potential application of multi-source data to identify seismic precursors.     

Modeling urban heat islands in heterogeneous land surface and its correlation with impervious surface area by using night-time ASTER satellite data in highly urbanizing city,Delhi-India

The present study is an assessment and identification of urban heat island (UHI) in the environment of one of the fastest urbanizing city of India, Delhi Metropolis, employing satellite image of ASTER and Landsat 7 ETM+ in the thermal infrared region 3–14 μm. Temporal (2001 and 2005) ASTER datasets were used to analyze the spatial structure of the thermal urban environment subsequently urban heat island (UHI) in relation to the urban surface characteristics and land use/land cover (LULC). The study involves derivation of parameters governing the surface heat fluxes, constructing statistics of ASTER thermal infrared images along with validation through intensive in situ measurements. The average images reveal spatial and temporal variations of land surface temperature (LST) of night-time and distinct microclimatic patterns. Central Business District (CBD) of Delhi, (Connaught Place, a high density built up area), and commercial/industrial areas display heat islands condition with a temperature greater than 4 °C compared to the suburbs. The small increase in surface temperature at city level is mainly attributed to cumulative impact of human activities, changes in LULC pattern and vegetation density. In this study the methodology takes into account spatially-relative surface temperatures and impervious surface fraction value to measure surface UHI intensity between the urban land cover and rural surroundings. Both the spatial and temporal variation in surface temperature associated with impervious surface area (ISA) has been evaluated to assess the effect of urbanization on the local climate.     

沉淀硬化不锈钢的应用工艺探讨

阐述了沉淀硬化不锈钢（ＺＧｏＣｒ１６Ｎｉ４ＮｂＣｕ３）在铸造、热处理、无损探伤过程中易出现的问题及解决方法。     

浅谈焊接的分类

探讨了焊接方法分类的原则,使用的范围.分析了焊接的能源与它们之间的关系,对焊接运用的条件,焊接的目的进行了分类和定义.     

Influence of ionospheric perturbations in GPS time and frequency transfer

The stability of GPS time and frequency transfer is limited by the fact that GPS signals travel through the ionosphere. In high precision geodetic time transfer (i.e. based on precise modeling of code and carrier phase GPS data), the so-called ionosphere-free combination of the code and carrier phase measurements made on the two frequencies is used to remove the first-order ionospheric effect. In this paper, we investigate the impact of residual second- and third-order ionospheric effects on geodetic time transfer solutions i.e. remote atomic clock comparisons based on GPS measurements, using the ATOMIUM software developed at the Royal Observatory of Belgium (ROB). The impact of third-order ionospheric effects was shown to be negligible, while for second-order effects, the tests performed on different time links and at different epochs show a small impact of the order of some picoseconds, on a quiet day, and up to more than 10 picoseconds in case of high ionospheric activity. The geomagnetic storm of the 30th October 2003 is used to illustrate how space weather products are relevant to understand perturbations in geodetic time and frequency transfer.     

两类激波捕捉格式的性能分析

考虑了两类典型的激波捕捉格式:特征形式的MUSCL(Monotone Upstream-centred Schemes for Conservation Laws)格式和WENO(Weighted Essentially Non-Oscillatory)格式.MUSCL格式在作特征变换时使用了局部线性化的思想,并且针对波系的性质施加相应的限制器;通过逐维重构实现有限体积法的WENO格式.针对一维、二维和三维Euler系统进行数值实验.在一维和二维的情况下,特征形式的MUSCL格式在接触间断的捕捉上具有较明显的优势,而对于激波的捕捉则差别不大.对于三维问题则是WENO格式对流场的分辨更精细.最后对上述结果给出解释,并且提出了可能的改进方法.     

增强碳/碳球锥切削中的最小热应力优化研究

对将增强碳/碳纤维块体切削成球锥外形的工艺,块体热膨胀系数异性轴指向可以极大地影响球锥热应力大小,存在优化设计的潜力。本文对增强碳/碳不同主轴方向弹性模量比值下的球锥最小热应力优化特性进行了研究,发现以1为界,不同模量对比关系下的优化特征是完全不同的。在本文加热条件下,当异性轴模量小于同性面模量时,优化曲线对温度场变化很敏感,以块体异性轴和球锥横截面成±42.9夹角时热应力最小;当异性轴模量大于同性面模量时,优化曲线随加热时间变化不大,以块体同性面与球锥对称轴平行或成小锐角时热应力最小。一般而言,工艺设计中应避免用模量大的主轴方向指向球锥对称轴方向。     

主燃孔位置对基于RQL高温升燃烧室流动与燃烧特性影响的数值模拟

为将富油燃烧/快速淬熄/贫油燃烧（RQL）用于高温升燃烧室设计，以实现温升与排放的良好统一，对不同主燃孔位置下 的单头部矩形燃烧室流动、淬熄区气流混合、燃烧和排放特性进行数值模拟。结果表明：燃烧室中心回流区的长度和高度随着主 燃孔轴向距离的增大而增大。随着主燃孔轴向距离的增大，主燃孔射流深度增加，射流角度逐渐向下游偏转，导致淬熄区内气流 的混合效果减弱；随着主燃孔位置的后移，富油区内的当量比显著增大，导致CO和碳烟的生成量迅速增加，淬熄区内的沿程高温 区域面积逐渐缩小，燃烧效率逐渐降低。当X/H=0.7时，燃烧室沿程NO生成量始终处在较大值；而当X/H=0.9时，燃烧室沿程NO 生成量始终处于较小值，但CO的生成量增大。     

超细磨粒砂轮修整后表面轮廓特征的实验研究

本文以不同的修整条件修整砂轮,用表面粗糙度仪测量砂轮表面轮廓曲线数据,通过FFT软件分析其频谱变化.实验结果表明,当修整深度较小时,砂轮表面出现明显的修整特征频率;当修整深度增大时,修整特征频率不明显.而修整进给率较小时,修整特征频率不明显;当修整进给率较大时,砂轮表面出现明显的修整特征频率.