Hybrid integration method for highly maneuvering radar target detection based on a Markov motion model

To detect highly maneuvering radar targets in low signal-to-noise ratio conditions, a hybrid long-time integration method is proposed, which combines Radon-Fourier Transform(RFT), Dynamic Programming(DP), and Binary Integration(BI), named RFT-DP-BI. A Markov model with unified range-velocity quantification is formulated to describe the maneuvering target’s motion. Based on this model, long-time hybrid integration is performed. Firstly, the whole integration time is divided into multiple time seg...     

基于FCM聚类的示温漆图像分割算法

根据示温漆(TIP)图像特征及相关实验结果,提出了一种基于模糊C均值(FCM)聚类的示温漆图像分割算法。该算法以FCM聚类算法为核心,应用双边滤波器平滑图像,提高图像分割质量。通过颜色空间转换,提高图像聚类的迭代效率。实验表明:该算法增强了示温漆温度判读需要的特征信息,可以提取人眼无法识别的等温线,同时消除了等温线崎岖等现象,测温误差为±10℃。算法应用效果良好,满足工程要求,已用于示温漆自动判读软件开发。      

Instability and unsteadiness of aircraft wake vortices

This paper presents a review of theoretical and experimental results on stability and other unsteady properties of aircraft wakes. The basic mechanisms responsible for the propagation and the amplification of perturbation along vortices, namely the Kelvin waves and the cooperative instabilities, are first detailed. These two generic unsteady mechanisms are described by considering asymptotic linear stability analysis of model flows such as vortex filaments or Lamb–Oseen vortices. Extension of the linear analysis to more representative flows, using a biglobal stability approach, is also described. Experimental results obtained using LDV, hot wire and PIV in wind tunnels are presented and they are commented upon the light of theory.     

基于星载可见光相机的空间碎片探测

空间碎片在轨识别与参数辨识为空间轨道预警、航天器规避空间碎片提供了重要依据。文章在轨道相对动力学的基础上,模拟了空间碎片在光学探测过程中的拖尾成像特性;随后,采用 Hough变换对空间碎片尾迹特征.r进行提取与识别,获取碎片方位角信息,通过匹配多帧图像,获取碎片的方位角速度信息。同时,结合激光测距仪的测距信息,获取空间碎片的位置和速度信息;通过数值仿真验证,该方法能够实现对空间碎片探测、识别和定位,因而具有一定的工程应用价值。     

基于检测结果的涡轮叶片精铸型腔反变形优化设计

针对空心涡轮叶片精铸过程中的试错法和数值仿真法难以敏捷反应铸件的真实变形情况,提出一种基于检测结果的精铸零件反变形综合补偿方法.通过对精铸叶片试模样件进行三坐标检测及统计分析,得到叶身截面收缩、扭转和弯曲变形情况,并建立其综合补偿反变形模具型腔优化算法,实现精铸型腔的反变形优化设计.以精铸叶片试模样件叶尖处截面为例,其叶身段型面误差、前缘最大误差、后缘最大误差相对于未补偿前分别减少了50%,68%和31%.实例验证表明:其研究成果能有效提高空心涡轮叶片的精铸成型精度,达到精确控形的目的.      

等极孔球形压力容器平面缠绕规律

基于空间解析几何理论及运动学分析方法,建立复合材料球形压力容器平面缠绕落纱点轨迹运动方程,推导出等极孔球形容器表面缠绕纤维落纱点空间位置、速度以及加速度的求解函数;通过对落纱点运动规律的分析,解出空间落纱点各方向运动速度的大小及其各方向夹角余弦值。最后利用Matlab软件对不同的丝嘴运动平面倾斜角的缠绕轨迹进行模拟,通过该计算方法模拟的轨迹结果与实际球形容器缠绕线型相符合,验证了该算法的有效性。     

Investigation on Thermal Contact Conductance Based on Data Analysis Method of Reliability

The method of reliability is proposed for the investigation of thermal contact conductance (TCC) in this study. A new definition is introduced, namely reliability thermal contact conductance (RTCC), which is defined as the TCC value that meets the reliability design requirement of the structural materials under consideration. An experimental apparatus with the compensation heater to test the TCC is introduced here. A practical engineering example is utilized to demonstrate the applicability of the proposed approach. By using a statistical regression model along with experimental data obtained from the interfaces of the structural materials GH4169 and K417 used in aero-engine, the estimate values and the confidence level of TCC and RTCC values are studied and compared. The results show that the testing values of TCC increase with interface pressure and the proposed RTCC model matches the test results better at high interface pressure.     

民航行李X光安检图像自适应小波去噪算法

对X光安检图像进行去噪处理可以更清楚地显示出危险物。针对传统小波软硬阈值去噪方法的缺陷．给出了一种自适应阈值的去噪方法,在此方法中,首先进行软硬阈值的折中处理,然后分别对大于和小于阈值的两部分进行自适应处理。利用Tennessee大学提供的实际采集的X光安栓图像进行实验,结果表明该方法能有效地去除安检图像中的噪声,图像去噪后的信噪比、峰值信噪比分别是25．2229dB、27．708dB．与含噪图像相比分别增加了7．7253dB和7．739dB。因此该方法表现出较高的去噪性能。     

MEMS陀螺零偏温度补偿模型研究

针对MEMS陀螺工作易受温度变化影响、角速度测量输出误差大、预热时间长的问题,通过大量实验数据分析、总结规律,建立了零偏温度补偿模型,并结合最小二乘法利用多元线性回归技术对模型参数进行了辨识。对比零偏温度补偿前后的试验结果表明,经过补偿后的MEMS陀螺不但测量精度得到提高,其工程应用稳定性也得到增强。     

逆合成孔径雷达信号处理方法研究进展

在简要评述国内外现有的逆合成孔径雷达（ISAR）信号处理的运动补偿和成象方法之后，介绍了南京航空航天大学ISAR课题组近年来在ISAR信号处理方法研究中取得的主要进展，包括基于多散射点定位观点的雷达成象观测模型，基于最大似然原理的同时运动补偿和成象方法，基于最大似然原理的多目标成象方法和基于时频分析的多目标成象方法，以及超分辩成象方法，文末指出了在ISAR信号处理方面有待进一步研究的问题。