The characteristics of sharp (small-scale) boundaries of solar wind plasma and magnetic field structures

We investigate properties of large (>20%) and sharp (<10 min) solar wind ion flux changes using INTERBALL-1 and WIND plasma and magnetic field measurements from 1996 to 1999. These ion flux changes are the boundaries of small-scale and middle-scale solar wind structures. We describe the behavior of the solar wind velocity, temperature and interplanetary magnetic field (IMF) during these sudden flux changes. Many of the largest ion flux changes occur during periods when the solar wind velocity is nearly constant, so these are mainly plasma density changes. The IMF magnitude and direction changes at these events can be either large or small. For about 55% of the ion flux changes, the sum of the thermal and magnetic pressure are in balance across the boundary. In many of the other cases, the thermal pressure change is significantly more than the magnetic pressure change. We also attempted to classify the types of discontinuities observed.     

Acceleration of interplanetary pick-up ions and anomalous cosmic rays

It may not be doubted anymore that anomalous cosmic rays (ACRs) are produced in the heliosphere from interplanetary pick-up ions through their acceleration at the solar wind termination shock. However, there is no general agreement in the community of heliospheric researchers concerning the mechanism of injection of the pick-up ions into the shock acceleration. We discuss here three possible ways for pick-up ions to be involved into the acceleration process at the termination shock: (1) preacceleration of pick-up ions in the whole region from the Sun up to the termination shock by solar wind turbulences and interplanetary shock waves, (2) local preacceleration of pick-up ions in a vicinity of the termination shock by shock surfing, and (3) formation of high-velocity tails in pick-up ion spectra consisting of secondary pick-up ions which are produced in the supersonic solar wind due to ionization of energetic neutral atoms entering from the inner heliosheath.     

总线通讯实验系统中矢量字的处理方法

研究了在1553B总线通讯实验系统远程终端（RT）仿真中矢量字的处理方法。设计了矢量字的手动单个设置、自动更新和使能RT中断更新三种处理方法。详细分析了各种方法中数据传输的执行过程。由于实验系统中能够灵活地设置矢量字,因此可以实现对采用更新机制传输消息的通讯过程的仿真。     

Effects of Mach numbers on Magnus induced surface pressure

Experimental and numerical methods were used to investigate the Magnus phenomena over a spinning projectile. The pressure force acting on the surface of a spinning projectile was measured for various cases by employing a relatively novel experimental technique. A set of miniature pressure sensors along with a data acquisition board, battery and storage memory were placed inside a spinning model and the surface pressure were obtained through a remotely controlled system. Circumferential pressures of the model for both rotational and static conditions were obtained at two different free stream Mach numbers of 0.4 and 0.8 and at different angles of attack. The results showed the ability of this new test method to measure the very small Magnus force via surface pressures over the projectile. The results provide a deep insight into the flow structure and illustrate changes in the cross-flow separation locations as a result of rotation. Similar results were obtained by the numerical simulations and were compared with the experimental data.     

LENS风洞试验返回器模型气动热特性模拟

国家数值风洞高超声速流动模拟软件HyFLOW的研制对打破国外同类软件的技术壁垒具有重要意义。与国外DPLR软件进行了对比研究，同时系统介绍了HyFLOW软件求解器的数值方法、物理化学模型以及壁面催化特性计算模型等主要方法，采用典型算例对有限催化模型进行了数值验证，最后基于LENS风洞试验146 mm返回器标模外形开展了高超声速气动热特性数值模拟。研究结果表明，HyFLOW软件在高超声速热化学非平衡流动模拟与评估方面的气动力计算精度高，与国外同类软件DPLR相当，同时其壁面催化条件下的气动热计算精度可靠，可信度高。     

Effects on winter circulation of short and long term solar wind changes

Indices of the North Atlantic Oscillation and the Arctic Oscillation show correlations on the day-to-day timescale with the solar wind speed (SWS). Minima in the indices were found on days of SWS minima during years of high stratospheric aerosol loading. The spatial distribution of surface pressure changes during 1963–2011 with day-to-day changes in SWS shows a pattern resembling the NAO. Such a pattern was noted for year-to-year variations by Boberg and Lundstedt (2002), who compared NAO variations with the geo-effective solar wind electric field (the monthly average SWS multiplied by the average southward component, i.e., negative Bz component, of the interplanetary magnetic field). The spatial distribution of the correlations of geopotential height changes in the troposphere and stratosphere with the SWS; the geo-effective electric field (SWS∗Bz); and the solar 10.7 cm flux suggests that solar wind inputs connected to the troposphere via the global electric circuit, together with solar ultraviolet irradiance acting on the stratosphere, affect regional atmospheric dynamics.     

卷簧式浅层月壤取样器设计及动力学分析

面向浅层月壤取样,文章设计了新颖的卷簧式可伸缩小型月壤取样器,它包括柔性取样臂和振动式取样头。对取样器进行了动力学有限元分析,研究了取样臂为不同长度时取样头的振动模态及频率响应,得出取样臂一阶横振频率与取样臂长度呈负幂函数关系;对取样器测控系统进行了振动试验,通过扫频方式测量取样臂为不同长度时的自振频率,给出了取样臂长...     

基于虚拟正交试验的压气机叶轮轴-毂径向微动特性研究

用Pro/E建立压气机叶轮轴-毂三维模型,利用ANSYS软件采用子结构结合网格随移技术的分析方法,建立其有限元模型。采用虚拟正交试验方法对压气机叶轮轴-毂进行仿真,得出过盈量、摩擦系数、转速对最大单位摩擦功和平均摩擦功影响显著性次序及影响规律,得到最优组合。结果表明,模拟及正交试验优化结果准确、可靠,有效地降低了摩擦磨损程度,对实际装配过程具有一定的指导作用。     

基于支持向量机和粒子群算法的钛合金铣削加工参数优化

钛合金材料在加工过程中受铣削力影响易于产生变形而影响加工效果,为保证加工质量,提高生产效率及降低加工成本,研究切削加工参数的合理选择非常重要.对钛合金材料Ti6Al4V铣削加工进行有限元数值计算,结合试验设计方法构建了基于支持向量机的切削力预测模型,以材料去除率为优化目标,提出了一种基于支持向量机和粒子群算法的优化方法,对钛合金铣削加工参数进行了优化.结果表明,该方法准确、高效、可行,为钛合金加工工艺参数优化提供一种新的方法,具有良好的推广价值.     

石英加速度计离心机试验误差系数显著性分析

提出了一种针对石英加速度计精密离心机试验的显著性分析方法.在多位置方法分离加速度计误差系数时,由于激励不足等试验条件的限制,无法保证高次项系数的标定结果正确.离心机试验利用离心机提供的向心加速度作为仪表的输入,能够标定出高次项系数.为了确定被标定的误差系数均具有可信度,有必要对高过载试验结果进行分析,保留可信的误差系数,证明使用的误差模型无误.由于此方法的通用性,在其他试验条件下的误差分离试验中仍可运用.