Dynamic modeling and analysis of vortex filament motion using a novel curve-fitting method

Applications of a novel curve-fitting technique are presented to efficiently predict the motion of the vortex filament, which is trailed from a rigid body such as wings and rotors. The governing equations of the motion, when a Lagrangian approach with the present curve-fitting method is applied, can be transformed into an easily solvable form of the system of nonlinear ordinary differential equations. The applicability of Be′zier curves, B-spline, and Lagrange interpolating polynomials is investigated. Local Lagrange interpolating polynomials with a shift operator are proposed as the best selection for applications, since it provides superior system characteristics with minimum computing time, compared to other methods. In addition, the Gauss quadrature formula with local refinement strategy has been developed for an accurate prediction of the induced velocity computed with the line integration of the Biot–Savart law. Rotary-wing problems including a vortex ring problem are analyzed to show the efficiency, accuracy, and flexibility in the applications of the proposed method.     

基于格子Boltzmann方法表面形貌对微通道对流换热的影响

为推动微通道冷却技术在航空发动机中的应用,进一步提高航空发动机性能,本文通过扫描电子显微镜、粗糙度扫描仪等多方式扫描得到实际加工物体表面形貌,结合分形理论进行处理,得到真实、光滑、分形插值、康托尔集四类圆形截面管模型,管径100μm~400μm;采用格子Boltzmann方法进行数值模拟,首先通过与文献中实验结果的对比,验证了此方法的正确性,然后对空气在这四类圆形截面微通道中的对流换热特性进行了数值模拟,计算雷诺数Re范围80~640;结果发现：表面形貌是微通道中对流换热不可忽略的因素,相对粗糙度越大越有利于换热,真实扫描管的换热性能要比相同条件下光滑管高2.22%;分形理论可用于微通道表面形貌的构建,在相同迭代次数下,分形插值模型与真实扫描形貌换热性能相差0.03%,而康托尔集模型与真实扫描形貌换热性能相差1.88%,分形插值模型较康托尔集模型更能真实地反映实际形貌;微通道中,随着雷诺数的增加Nu将不再是常数,而是有增加的趋势。     

基于模型的装备维修性设计控制技术

伴随数字化设计方法日趋成熟,飞机装备维修性设计面临如何与三维数字化设计环境下功能性能设计同步的难题。对比分析了数字化环境维修性设计与传统维修性设计的主要差别,提出了基于飞机装备数字化设计环境维修性设计流程,研究了维修性设计参数的表达模型以及维修性参数信息在三维设计数字环境中的转化、集成与利用方式。基于图论和网络节点框图,提出了一种以节点网络图、单节点维修时间模型、维修过程时间模型为表征的飞机装备维修性设计与控制方法。经实例验证,提出的这套基于数字模型的维修性设计技术,对装备在数字化设计环境下同步开展维修性设计具有一定的工程指导价值。     

退化量有缺失的无失效小样本轴承可靠性评估

针对有试验性能退化量参数记录、且(或)有部分数据缺失情况的小样本无失效轴承试验问题,通过由Taylor和Thompson提出的数据模拟法实现补全样本退化量,结合Bootstrap自助法扩大样本量,再根据基于性能退化轨迹的补充信息方法来进行其可靠性评估。选取7组受试轴承的振动退化量,对比在完整数据和带有缺失数据情况下的分析结果,发现可合理利用原舍弃不合规试验的部分有效信息,使之增加可靠性评估的样本数,从而得到较不用这些数据更为准确的结果,且所得结果较用完整数据结果绝对值相差在01以内。对比由极大似然估计法和加权E-Bayes法分析试验寿命数据的结果,发现该方法所得评估结果更优,与试验实际相比误差在10%以内,对于提高评估精度及降低试验成本有积极的实际意义。     

Fluid structure interaction simulation of supersonic parachute inflation by an interface tracking method

An Arbitrary Lagrangian–Eulerian (ALE) approach with interface tracking is developed in this paper to simulate the supersonic parachute inflation. A two-way interaction between a nonlinear finite element method and a finite volume method is accomplished. In order to apply this interface tracking method to problems with instantaneous large deformation and self-contact, a new virtual structure contact method is proposed to leave room for the body-fitted mesh between the contact structural surfaces. In addition, the breakpoint due to the fluid mesh with negative volume is losslessly restarted by the conservative interpolation method. Based on this method, fluid and structural dynamic behaviors of a highly folded disk-gap-band parachute are obtained. Numerical results such as maximum Root Mean Square (RMS) drag, general canopy shape and the smallest canopy projected areas in the terminal descent state are in accordance with the wind tunnel test results. This analysis reveals the inflation law of the disk-gap-band parachute and provides a new numerical method for supersonic parachute design.     

小样本条件下多应力加速寿命试验预测方法

鉴于导弹中的电子设备价格昂贵、可用于试验的样本量少,在开展加速试验以及寿命预测的实际工作中通常为小样本的背景。文章研究探索小样本条件下多应力加速试验寿命预测方法,分别建立通用对数线性模型、 BAS-BP神经网络模型、灰色–支持向量回归模型,结合多应力加速试验数据在各应力条件下的样本容量分别为 56组、20组、10组、5组的情况下,比较 3种模型的预测效果,分析各模型的适用场合和时机,探索小样本条件下模型的选优问题,为小样本条件下多应力加速试验寿命预测提供有益的借鉴。     

乘务类学生英语课程教学方法实证探析

通过问卷调查探析乘务类本科生对交际和非交际教学法及活动的认识和态度,旨在研究一种可以有效提高英语教学质量的方法.结果表明乘务类学生对交际教学活动和非交际教学活动都有偏好,因此对于此类学生更为有效的教学方法就是采取折中的综合性教学法.     

大型双曲冷却塔表面脉动风压随机特性——风压极值探讨

针对风压信号呈现的非高斯特性和传统极限估计方法的局限,首次提出基于保证率和相关性的极值估计方法——全概率迭代法进行冷却塔表面脉动风荷载极值分析,并和传统的峰值因子法及改进的Sadek-Simiu法计算结果进行对比验证。结果表明：全概率迭代法避开了对随机过程的高斯分布假定,相比传统的极值估计方法其结果更加真实可靠;表达风压极值中脉动分量的峰值因子数值沿着环向和子午向变化显著,如取为同一数值则偏于危险或过于保守;采用全概率迭代法得到的表面风压系数极值分布曲线与规范取值相比,迎风面和负压峰值区域极值偏小,背风区域极值偏大,且最小值对应角度相差约10°。     

Numerical Simulation of Rotor Flow Field Based on Overset Grids and Several Spatial and Temporal Discretization Schemes

A numerical method based on solutions of Euler/Navier-Stokes (N-S) equations is developed for calculating the flow field over a rotor in hover. Jameson central scheme, van Leer flux-vector splitting scheme, advection upwind splitting method (AUSM) scheme, upwind AUSM/van Leer scheme, AUSM+ scheme and AUSMDV scheme are implemented for spatial discretization, and van Albada limiter is also applied. For temporal discretization, both explicit Runge-Kutta method and implicit lower-upper symmetric Gauss-Seidel (LU-SGS) method are attempted. Simultaneously, overset grid technique is adopted. In detail, hole-map method is utilized to identify intergrid boundary points (IGBPs). Furthermore, aimed at identification issue of donor elements, inverse-map method is implemented. Eventually, blade surface pressure distributions derived from numerical simulation are validated compared with experimental data, showing that all the schemes mentioned above have the capability to predict the rotor flow field accurately. At the same time, vorticity contours are illustrated for analysis, and other characteristics are also analyzed.     

一种平板螺旋式诱导轮的扬程计算法

目前平板螺旋式诱导轮的扬程计算法大都没有考虑诱导轮出口涡流区的影响,计算出的扬程和实际扬程有较大的偏差,涡流区的存在一方面会减小主流过流面积,使液流出口速度增大,损失增加,另一方面涡流运动自身也会消耗能量,使得诱导轮的扬程有所降低.以径向平衡理论为基础,考虑诱导轮出口涡流区的影响,提出一种扬程的修正计算法,用该方法对两种诱导轮进行了计算,计算结果和试验实测值比较接近,可以更准确的计算非空化工况下诱导轮的扬程.