一种基于二级变维Kalman滤波的跟踪算法

Kalman滤波器是一种高速的目标跟踪器.针对不同阶数的Kalman滤波器具有不同的跟踪能力与跟踪效率之间存在的矛盾,设计了一种自适应Kalman滤波算法.该算法使用两级滤波器,根据目标机动性的变化,适当的调整滤波器的阶数,使跟踪结果快速收敛,很好地解决了矛盾.通过对仿真结果分析表明,算法具有可靠、计算简便、快速等特点,模型滤波精度较高,并可实现实时跟踪预测,具有一定的理论价值和实用价值.     

一种基于多相滤波器的信道化数字检波方法

提出了一种基于多相滤波器的信道化数字检波方法,该方法可以满足雷达脉冲检波的实时性和大带宽的要求,抽取运算在滤波之前,运算量小,结构高效,易于在可编程大规模集成电路上实现.     

基于进化神经网络的组合导航系统滤波算法研究

组合导航系统中,卡尔曼滤波算法的估计特性依赖于精确的系统模型和准确的外观测数据.任何一个条件不满足将导致滤波精度下降甚至发散.为此,本文引入进化神经网络和自适应卡尔曼滤波技术.仿真结果证明,文中所提算法能够有效克服常规卡尔曼滤波的缺点,并保持较高的精度.     

多传感器组合导航系统的改进多尺度滤波算法

多尺度滤波算法在多传感器组合导航系统中已得到成功应用，然而该算法用到多个时刻的量测向量，导致算法计算量过大，并影响系统的实时性。针对上述问题，首先利用分块技术与小波变换将时域内描述的系统原始状态方程转换为块状态方程，然后将实时得到的当前时刻的量测向量表达为块状态向量的形式，最后结合常规卡尔曼滤波技术与序贯滤波的思想，提出了一种改进的多传感器组合导航系统多尺度滤波方法。将该算法应用于GPS/SST/SINS多传感器组合导航系统，仿真结果验证了该算法不仅具有较好的实时性，而且相对于传统算法,系统的定位精度提高1倍以上。     

边缘图像自适应编码方法

边缘特征常被视作无人机视觉系统中的重要信息（比如在视觉导航时需用边缘特征识别障碍物），在实践中会遇到边缘图像数据量大的情况。针对边缘图像高效压缩问题，提出了边缘图像自适应编码方法。首先以边缘打包法的压缩比和边缘点所占比例为特征，建立Logistic回归模型，然后利用图像数据库对该模型进行离线训练获取模型参数，最后利用Logistic回归模型建立分类器，自适应地在边缘打包法和链码编码法中选择压缩比最高的方法对边缘图像进行压缩。对VOC2012图像数据库的测试结果表明，与常用压缩方法相比，提出的算法能提高压缩比5%左右，有效减少了数据量。     

State estimate for stochastic systems with dual unknown interference inputs

Stochastic system state estimation subject to the unknown interference input widely exists in many fields, such as the control, communication, signal processing, and fault diagnosis. However, the research results are mostly limited to the stochastic system in which only the dynamic state model or the measurement model concerns the individual unknown interference input, and the state model and the measurement model are both with the same unknown interference input. State estimate of the stochastic systems where the state model and the measurement model contain dual Unknown Interference inputs (dual-UI) with different physical meanings and mathematical definitions is concerned here. Firstly, the decoupling condition with the Unknown Interference input in the State model (S-UI) is shown, which introduces the decoupled system with the adjacent Measurement concerned Unknown Interference inputs (M-UI) appearing in the state model and the measurement model. Then, through defining the Differential term of the adjacent M-UI (M-UID), the equivalent system with only M-UID in the state model is obtained. Finally, considering the design freedom of the equivalent system, the decoupling filter in the minimum mean square error sense and the adaptive minimum upper filter with different applicable conditions are represented to obtain the optimal and sub-optimal state estimate, respectively. Two simulation cases verify the effectiveness and superiority compared with the traditional methods.     

Guidepost-based autonomous orbit determination method for GEO satellite

Guidepost-based navigation system is a novel autonomous orbit determination method for the GEO satellite. The system is achieved by using the camera imaging function to obtain the guidepost images and the GNSS signal receiver to obtain the pseudoranges between the GEO and the navigation satellites. Due to the high altitude of GEO satellite and the time-varying sunlight condition in the space environment, it may be difficult to obtain object image points and the distance measurements of GNSS because of the weak visibility of the guideposts. To deal with the problem, a novel integrated orbit determination system is presented. The Earth landmarks, the in-orbit spacecraft and GNSS navigation satellites whose line-of-sights and the distance can be easily obtained are used at the same time as information for the GEO satellite navigation based on the observability conditions analysis. The observability of the GEO satellite navigation system is analyzed through the physical observability, the mathematical observability and the engineering observability through the observing geometry, the rank of observability matrix and the Cramer-Rao lower bound (CRLB) respectively. Besides, the maximum correntropy unscented Kalman filter (MCUKF) algorithm is applied to improve the estimation stability of the system in the presence of non-Gaussian noises. The simulation indicates the feasibility of the proposed scheme.     

采用单目视觉的非合作目标星状态估计

针对微小卫星逼近观测未知的空间翻滚非合作目标星任务，提出一种基于单目视觉的目标星相对状态估计方法。在建立追踪星/目标星相对运动模型的基础上，以单目相机识别并测量获得的目标星固有特征的像素位置为观测输入，通过扩展卡尔曼滤波算法实现对目标星相对位置、相对速度、相对姿态、角速度、惯量比和特征位置等状态的估计。仿真结果表明,该方法能够很好地实现对未知非合作目标星的相对状态估计，姿态估计误差小于2°，位置估计误差小于0.1 m，特征点位置平均估计误差小于0.04 m。     

用于平台连续瞄准和校准的卡尔曼滤波器

本文为提高制导精度,讨论了用于惯性平台的连续瞄准、校准的卡尔曼滤波器,介绍平台系统和加速度表的误差模型、参数辨识的卡尔曼滤波方法及重力残数加速度表校准原理。     

带限信号采样和数字相参处理

传统的相参处理器包括Ｉ，Ｑ二个通道，存在不避免的幅相不平衡，本文研究中频带限信号采样经数字处理获得零中频正交数字信号的方法，该方法只用一路Ａ／Ｄ转换器直接对中频带限信号进行采样和数字变换，用镜频抑制滤波器，二次重采样移频电路分离零中频信号的同相分量Ｉ。和正交分量Ｑ，因而，该方法能够克服Ｉ，Ｑ通道不平衡，文中对中频频率，采样时钟周期的选择，镜频抑制滤波器的设计进行了详细讨论，选用具有线性相位特性的Ｆ