串置双五分量天平的研制

本文介绍风洞应变天平中首次研制成功的一台串置双五分量天平。串置双天平由一块钢材制成。O_1天平固定在 O_2天平的受力端。O_2天平既能测量左平尾载荷,又能传递由 O_1天平测量的右平尾载荷。正确分析两台天平的受力传力路线和弹性变形的综合位移量,用严谨的数学公式描述两台天平测量的力和传递的力。对这两种力进行数学分解,形成数学模型,写出天平静校公式的数学表达式,并据此研制天平静校设备,分析天平在各分力作用下的弹性位移,写出弹性角公式。上述各点是串置双天平的核心问题。最后经风洞引导性实验证明,串置双天平的原理、方案、受力分析、静校公式等都是正确的。在国内外,串置双天平第一次用于风洞实验,获得了初步成功。     

土壤槽三分量天平

本文通过实例表明,常规风洞测力天平移植于对沙漠的研究是成功的。设计排除了土壤的自重影响,天平有较高的灵敏度,整机可根据不同土壤槽而升沉,是研究沙粒迁移的较好工具。     

大型航天器SGCMG系统的奇异性分析研究

应用单框架控制力矩陀螺系统（SGCMG）是大型航天器姿控系统较为理想的选择，但是该系统存在严重的奇异现象，增加了操纵律的设计与开发的难度。文章从奇异性分析的角度对单杠架控制力矩陀螺系统的奇异状态进行了研究，提出了奇异可回避性的判别方法，并据此对SGCMG系统奇异状态进行了系统的分类，针对常用的各种构形的SGCMG系统进行了讨论。     

The characteristics of sharp (small-scale) boundaries of solar wind plasma and magnetic field structures

We investigate properties of large (>20%) and sharp (<10 min) solar wind ion flux changes using INTERBALL-1 and WIND plasma and magnetic field measurements from 1996 to 1999. These ion flux changes are the boundaries of small-scale and middle-scale solar wind structures. We describe the behavior of the solar wind velocity, temperature and interplanetary magnetic field (IMF) during these sudden flux changes. Many of the largest ion flux changes occur during periods when the solar wind velocity is nearly constant, so these are mainly plasma density changes. The IMF magnitude and direction changes at these events can be either large or small. For about 55% of the ion flux changes, the sum of the thermal and magnetic pressure are in balance across the boundary. In many of the other cases, the thermal pressure change is significantly more than the magnetic pressure change. We also attempted to classify the types of discontinuities observed.     

直流发电机并联供电平衡性探讨

主要介绍了某型飞机直流发电机并联供电的原理、供电时负载变化对平衡性的影响以及不平衡产生的原因,分析了影响并联供电的一般规律,并结合实际提出了预防不平衡供电的具体措施和建议。。     

Advances in critical technologies for hypersonic and high-enthalpy wind tunnel

Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster, higher and further. The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development. There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes. These wind tunnels are named as air-directly-heated hypersonic wind tunnel, light-gas-heated shock tunnel, free-piston-driven shock tunnel and detonation-driven shock tunnel, respectively. The critical technologies for developing the wind tunnels are introduced in this paper, and their merits and weakness are discussed based on wind tunnel performance evaluation. Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments. Three kinds of the measurement techniques considered to be of primary importance are introduced here, including the heat flux sensor, the aerodynamic balance, and optical diagnosis techniques. The techniques are developed usually for conventional wind tunnels, but further improved for hypersonic and high-enthalpy tunnels. The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future. Therefore, several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.     

2.4米跨声速风洞大展弦比飞机测力试验技术研究

针对大展弦比飞机的气动布局特点,在2.4米跨声速风洞中开展了大展弦比飞机测力试验技术研究。该项研究建立了大升阻比高精度天平设计技术和模型支撑系统设计平台,研制了专用大升阻比高精度测力天平和模型支撑系统。在国内高速风洞中建立了大型跨声速风洞模型设计新准则。研究结果表明:所提出和制定的方案是科学合理的,为我国大飞机研制提供了可靠的技术支撑。     

基于三角原理的压电驱动微位移定位机构的设计与分析

设计了一种基于三角原理的精密柔性定位机构,机构由压电叠堆作为驱动元件,经由柔顺机构输出缩小的位移.进行了理论计算和有限元分析并在样机上进行了静态特性的实验,结果表明该柔顺机构可以实现预期的运动.     

剪切气流驱动液滴运动的受力分析

实验研究了剪切流驱动的液滴在固体表面上起始运动的受力机理。工作中使用一系列液体和固体表面来获得不同的液滴接触角,并在小型风洞中进行实验。实验中对液滴的启动气流速度进行了测量,并综合各种起始时刻的参数信息,建立了一个关于液滴接触线表面张力和剪切气流拖拽力平衡的数学模型,揭示了液滴脱落时刻的受力情况。所建立的模型更适合液滴1变形情况,但对于其它类似情况的剪切气流驱动液滴运动也能够进行合理的描述。     

四分量片式铰链力矩天平技术及风洞实验应用研究

针对目前风洞铰链力矩实验中的一种三分量片式结构铰链力矩天平没有轴向力测量元件的不足,提出一种切实可行的四分量片式结构铰链力矩天平设计方案,进行了物理样机的研制,应用于某模型升降舵风洞铰链力矩实验中。实验结果与理论分析获得了良好的一致性,在舵面偏角为21°时,由忽略轴向力测量带来的舵面法向力系数相对误差百分比为14.7%,舵面弦向压心位置相对误差百分比为17.2%。