外翼上壁板根部连接形式对飞机承载能力的影响研究

在飞机结构设计中,外翼上壁板根部连接处结构形式对飞机的传力、变形、承载能力具有重要影响.通过对3种不同形式的上壁板根部连接方案进行压缩试验,研究各方案的承载能力、破坏方式.通过三维有限元方法,计算了连接部位的主要螺钉所分配的载荷,研究了长桁根部斜角对结构屈服载荷的影响,得到了最优的选型方案.     

可变形翼战术导弹飞行动力学联合仿真研究

基于集中质量假设发展的一套适于可变形翼导弹的多体运动模型,以附加惯性项及快变气动参数的形式来反映弹翼变形对导弹动态特性的影响,涉及交叉求解不同弹翼外形对应的气动特性及运动方程.由此提出的一种基于Missile DATCOM与MATLAB/SIMULlNK的联合仿真方法,应用于典型轴对称导弹的变翼动态特性研究中,快速有效...     

柔性机翼阵风响应与被动减缓研究

高空长航时无人机的机翼展弦比大、柔性较强,飞行过程中极易受到阵风的影响。文章以几何精确本征理论建立结构模型,耦合 Pitt-Peters动力入流理论建立柔性机翼非线性气弹模型,研究了柔性机翼阵风响应以及翼尖被动阵风减缓效应。采用空间 -时间平行的有限元离散方法,将气弹方程转化为一阶微分代数方程,Newton-Raphson和 Generalized-α算法分别用于静态变形和动态响应的求解,通过算例研究了离散阵风载荷下柔性机翼的阵风响应,结果表明翼尖被动阵风减缓装置对机翼变形有明显的减缓效果。     

Flapping wing micro-aerial-vehicle:Kinematics,membranes, and flapping mechanisms of ornithopter and insect flight

The application of biomimetics in the development of unmanned-aerial-vehicles (UAV) has advanced to an exceptionally small scale of nano-aerial-vehicles (NAV), which has surpassed its immediate predecessor of micro-aerial-vehicles (MAV), leaving a vast range of development possi-bilities that MAVs have to offer. Because of the prompt advancement into the NAV research devel-opment, the true potential and challenges presented by MAV development were never solved, understood, and truly uncovered, especially under the influence of transition and low Reynolds number flow characteristics. This paper reviews a part of previous MAV research developments which are deemed important of notification; kinematics, membranes, and flapping mechanisms ranges from small birds to big insects, which resides within the transition and low Reynolds number regimes. This paper also reviews the possibility of applying a piezoelectric transmission used to pro-duce NAV flapping wing motion and mounted on a MAV, replacing the conventional motorized flapping wing transmission. Findings suggest that limited work has been done for MAVs matching these criteria. The preferred research approach has seen bias towards numerical analysis as com-pared to experimental analysis.     

Dynamic modeling and analysis of vortex filament motion using a novel curve-fitting method

Applications of a novel curve-fitting technique are presented to efficiently predict the motion of the vortex filament, which is trailed from a rigid body such as wings and rotors. The governing equations of the motion, when a Lagrangian approach with the present curve-fitting method is applied, can be transformed into an easily solvable form of the system of nonlinear ordinary differential equations. The applicability of Be′zier curves, B-spline, and Lagrange interpolating polynomials is investigated. Local Lagrange interpolating polynomials with a shift operator are proposed as the best selection for applications, since it provides superior system characteristics with minimum computing time, compared to other methods. In addition, the Gauss quadrature formula with local refinement strategy has been developed for an accurate prediction of the induced velocity computed with the line integration of the Biot–Savart law. Rotary-wing problems including a vortex ring problem are analyzed to show the efficiency, accuracy, and flexibility in the applications of the proposed method.     

基于线化稳定性理论的后掠翼边界层内横流稳定性研究

采用Mack方法求解忽略曲率和压缩性的三维线化稳定性方程（Orr-Sommerfeld方程）,针对无限展长后掠翼,计算分析边界层内不同波长横流驻波沿弦向的放大率,确定最不稳定波的波长。计算结果与参考文献中的实验结论和计算结果符合较好,表明该方法能够准确的预测出最不稳定波的波长,可以用来指导横流驻波主导下的后掠翼流动稳定性问题研究。     

低雷诺数条件下微型无人机机翼形状的研究

利用CFD软件FLUENT,通过Spalart-Allmaras模型、低Reynolds和二层模型这3种湍流模型对正八边形机翼平面布局进行绕流分析并与试验数据进行对比,选择了低Reynolds湍流模型对4种微型无人机机翼平面形状的低雷诺数气动特性进行模拟分析,结果表明,矩形布局和反齐默曼布局是微型无人机比较理想的设计选择.     

小展弦比飞翼布局作战飞机垂直面机动性研究

比较分析了某小展弦比飞翼布局作战飞机与典型的常规布局战斗机F16在亚、跨、超声速范围的气动特性,相对而言,飞翼布局飞机具有较大的升阻比和较低的翼载荷.计算并分析了该飞翼布局作战飞机与F16在垂直机动面内的平飞加速性能和跃升性能,得到了由于布局和气动特性不同引起的飞翼布局作战飞机机动性的新特点.研究结果对飞翼布局作战飞机的设计和作战使用均具有一定的参考意义.     

基于遗传算法的旋转机翼飞机机翼优化设计

将基于实数编码的遗传算法与能准确描述翼型粘性流动的NS方程以及旋翼气动分析模型结合起来,以旋翼最大悬停效率作为优化设计的目标对旋转机翼飞机的机翼进行优化设计,设计结果表明通过优化设计旋翼的气动性能得到了提高,达到了优化设计的目的,旋翼优化设计方法是可行的.     

一种三维弹性机翼气动优化新方法

基于控制理论方法和有限元分析软件,通过将网格生成、流场计算、有限元分析、粘性伴随方程数值求解、梯度求解和拟牛顿优化算法等几方面的有效结合,研究与发展了计及静气动弹性影响的三维机翼气动优化设计方法,其中,雷诺平均Navier-Stokes方程为主控方程,气动载荷和结构静弹性变形量由气动/结构方程的耦合迭代求解得到,目标函数梯度信息由共轭方程数值求解得到。典型大展弦比机翼气动减阻设计结果表明：研究及发展的计及静气动弹性影响的三维机翼气动优化设计方法是有效的,能够有效考虑静气动弹性的影响。