高拱坝失效模式与失效概率

为克服高拱坝确定性安全评价中不考虑随机性、不进行风险分析的弊端,提出研究超静定结构高拱坝的失效模式、利用失效概率与失效风险值对高拱坝进行风险评价。在分析洪水、地震和材料老化等造成高拱坝失效原因的基础上,利用故障树分析法探索出高拱坝具有失稳溃坝、剪滑垮坝、超量开裂以及人为毁坝等4种主要失效模式;从产生载荷参数随机数、获取随机变量的分布规律和建立失效模式的状态函数等方面研究了高拱坝单个失效模式与系统失效概率的计算方法。计算了某高拱坝剪滑失效模式的失效概率。     

一种快速响应型小卫星的自主任务规划设计与应用

浦江一号卫星是由上海航天技术研究院研制的一颗快速响应型小卫星,于2015年9月成功发射,卫星质量347 kg,运行在高度481 km的太阳同步轨道.为高效、高精度识别定位地面大范围广泛而随机分布的电磁辐射目标,浦江一号卫星提出了基于单星电磁信号监测载荷与光学成像载荷综合应用的在轨自主任务规划方案.在轨应用表明:该设计解...     

超大口径环形天线包带展开过程动力学仿真

中间柔性包带是环形可展开天线的重要组成部分.中间包带拔销器解锁后,复材包带与环形桁架同步展开.因复材包带柔性较强,它会绕根部固定端进行回弹,因此展开过程存在金属接头和桁架上复材薄壁管件碰撞风险.随着天线口径增大,该风险会持续增大.基于柔性多体动力学理论对超大型口径环形可展开天线包带展开过程进行动力学建模仿真,并在此基础...     

发动机高速动平衡的振动相位分析

针对发动机转子高速动平衡转速波动、无法保证振动信号同步整周期采样的特点,提出了一种基于转速脉冲的振动信号重构技术,大大提高了相量测量的准确度和稳定性。经试验验证,这项技术是有效、可行的。     

一种星载巴特勒矩阵微放电特性的分析与验证

作为星载雷达发射微波功率合成的关键部件,巴特勒矩阵的微放电性能直接决定了雷达载荷的功率容量。因此,有必要对其微放电特性进行分析与验证。针对该需求,提出了一种用于大功率动态合成网络的星载巴特勒矩阵,并对其在真空条件下的微放电特性进行了分析与验证。第一,提出了一款用于星载雷达的大功率巴特勒矩阵,对其功率合成性能进行了分析。第二,为了对巴特勒矩阵微放电性能进行详细研究,对提出的巴特勒矩阵进行了微放电功率阈值仿真和自由电子分布分析。第三,为了验证分析结果的正确性,对该巴特勒矩阵进行了峰值功率14kW的真空微放电试验,验证了其在大功率真空环境下的微波传输功率容量。提出的巴特勒矩阵性能优良,为未来的星载雷达大功率微波部件提供了理论方法和关键技术支持。     

Laser-induced oxidation assisted micro milling of high aspect ratio microgroove on WC-Co cemented carbide

Severe tool wear and poor surface quality are the main problems during micro machining of cemented carbide. In this work, an innovative hybrid process of laser-induced oxidation assisted micro milling (LOMM) was proposed to solve the problems. A nanosecond laser was utilized to induce oxidation of the WC-20%Co material, producing loose oxide which was easy to remove. The micro machinability of the material was improved by laser-induced oxidation. The oxidation mechanisms of cemented carbide were studied. A microgroove with a depth of 2.5 mm and aspect ratio of 5 was fabricated successfully. The milling force, surface quality and tool wear mechanisms were investigated. For comparison, a microgroove was also fabricated with conventional micro milling (COMM) using identical milling parameters. Results revealed that in LOMM the milling force and tool wear rate were extremely low during removing the oxide. The machined surface quality and dimensional accuracy achieved by LOMM were superior to those obtained by COMM. The surface roughness S_a of the microgroove bottom reached 88 nm in LOMM, while the cross-sectional geometry of the microgroove was a trapezoid. Perpendicularity of the microgroove sidewall machined by LOMM was better than that by COMM. The tool wear forms in LOMM were coating spalling and slight tool nose breakage. Compared with COMM, the tool life in LOMM was prolonged significantly. It indicates that the proposed hybrid process is an effective and efficient way to fabricate high aspect ratio micro-features with high dimensional accuracy.     

涡扇发动机熄火故障在线检测方法

采用机载可测量的高压转子物理转速、低压转子物理转速和发动机进口总压等参数,建立了基于换算加速率的熄火故障在线检测方法.经全包线发动机工况计算仿真和试验验证,熄火过程的高低压转速加速率幅值为减速和喘振过程的1.5～5.0倍,高压轴断裂过程的高压转子加速率幅值是熄火过程的6.0～10.0倍,低压轴断裂过程的低压转速加速率幅...     

Effects on winter circulation of short and long term solar wind changes

Indices of the North Atlantic Oscillation and the Arctic Oscillation show correlations on the day-to-day timescale with the solar wind speed (SWS). Minima in the indices were found on days of SWS minima during years of high stratospheric aerosol loading. The spatial distribution of surface pressure changes during 1963–2011 with day-to-day changes in SWS shows a pattern resembling the NAO. Such a pattern was noted for year-to-year variations by Boberg and Lundstedt (2002), who compared NAO variations with the geo-effective solar wind electric field (the monthly average SWS multiplied by the average southward component, i.e., negative Bz component, of the interplanetary magnetic field). The spatial distribution of the correlations of geopotential height changes in the troposphere and stratosphere with the SWS; the geo-effective electric field (SWS∗Bz); and the solar 10.7 cm flux suggests that solar wind inputs connected to the troposphere via the global electric circuit, together with solar ultraviolet irradiance acting on the stratosphere, affect regional atmospheric dynamics.     

长板件数控加工技术的探索与研究

结合某型机板件在数控加工中的研制生产状况和存在的问题,论述了实现各种长板件类结构零件装夹定位、刀具及其参数、加工方案及程编策略.通过这些技术措施的实施,在一定程度上解决了在加工长板类零件装夹和定位时出现的零件变形、让刀效率低、质量不稳定等问题.